Mineral constituents in common chanterelles and soils collected from a high mountain and lowland sites in Poland

This paper reported the results of the determination of Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Rb, Sr and Zn in Common Chanterelles (Cantharellus cibarius) Fr. and surface soil layer (0-10 cm) underneath the fruiting bodies. Mushrooms and soils were collected from a lowland site in the Hel Peninsula (Baltic Sea coast) and a high mountain site in the Tatra Mountains. The trace elements were determined using validated method and inductively coupled plasma - atomic emission spectroscopy (ICP-AES). Common Chanterelles that emerged at sites poor in mineral nutrients podzols of the Hel Peninsula forests efficiently bioconcentrated several essential trace elements (K, P, Co, Cu, Mn, Na, Zn), while the abundance of those elements in carpophores was around half less compared to specimens from Zakopane region and which emerged in soils much richer in minerals. Common Chanterelles collected at two spatially distant background areas in Poland were only weakly contaminated with metals such as Ag, Cd, Hg and Pb. The maximum tolerable Cd and Pb contents of certain cultivated mushrooms are regulated in the European Union by law and these hazardous metals in C. cibarius were far below tolerance limits set.     

An improved segmentation approach for planar surfaces from unstructured 3D point clouds

The extraction of object features from massive unstructured point clouds with different local densities, especially in the presence of random noisy points, is not a trivial task even if that feature is a planar surface. Segmentation is the most important step in the feature extraction process. In practice, most segmentation approaches use geometrical information to segment the 3D point cloud. The features generally include the position of each point (X, Y and Z), locally estimated surface normals and residuals of best fitting surfaces; however, these features could be affected by noisy points and in consequence directly affect the segmentation results. Therefore, massive unstructured and noisy point clouds also lead to bad segmentation (over-segmentation, under-segmentation or no segmentation). While the RANSAC (random sample consensus) algorithm is effective in the presence of noise and outliers, it has two significant disadvantages, namely, its efficiency and the fact that the plane detected by RANSAC may not necessarily belong to the same object surface; that is, spurious surfaces may appear, especially in the case of parallel-gradual planar surfaces such as stairs. The innovative idea proposed in this paper is a modification for the RANSAC algorithm called Seq-NV-RANSAC. This algorithm checks the normal vector (NV) between the existing point clouds and the hypothesised RANSAC plane, which is created by three random points, under an intuitive threshold value. After extracting the first plane, this process is repeated sequentially (Seq) and automatically, until no planar surfaces can be extracted from the remaining points under the existing threshold value. This prevents the extraction of spurious surfaces, brings an improvement in quality to the computed attributes and increases the degree of automation of surface extraction. Thus the best fit is achieved for the real existing surfaces.     

台湾集集大地震及其余震的长周期地震动特性

用丰富的高质量数字强震记录对台湾集集大地震及余震的长周期地震动特性进行了研究. 本文主要研究了长周期地震动的强度随震级、距离及场地条件的变化情况;同时对近断层的长周期地震动特性进行了分析. 结果表明,集集大地震及余震的长周期地震动反应谱的形状主要受场地条件和震级控制（D+E类场地的反应谱要比B+C类的宽,震级大的反应谱要比震级小的宽）,而受距离影响并不显著;近断层长周期地震动明显受断层活动特性影响:上盘的长周期地震动比下盘的强,北部的比南部的强.      

An analytical study on three‐dimensional versus two‐dimensional water table‐induced flow patterns in a Tóthian basin

Although it has been increasingly acknowledged that groundwater flow pattern is complicated in the three‐dimensional (3‐D) domain, two‐dimensional (2‐D) water table‐induced flow models are still widely used to delineate basin‐scale groundwater circulation. However, the validity of 2‐D cross‐sectional flow field induced by water table has been seldom examined. Here, we derive the analytical solution of 3‐D water table‐induced hydraulic head in a Tóthian basin and then examine the validity of 2‐D cross‐sectional models by comparing the flow fields of selected cross sections calculated by the 2‐D cross‐sectional model with those by the 3‐D model, which represents the “true” cases. For cross sections in the recharge or discharge area of the 3‐D basin, even if head difference is not significant, the 2‐D cross‐sectional models result in flow patterns absolutely different from the true ones. For the cross section following the principal direction of groundwater flow, although 2‐D cross‐sectional models would overestimate the penetrating depth of local flow systems and underestimate the recharge/discharge flux, the flow pattern from the cross‐sectional model is similar to the true one and could be close enough to the true one by adjusting the decay exponent and anisotropy ratio of permeability. Consequently, to determine whether a 2‐D cross‐sectional model is applicable, a comparison of hydraulic head difference between 2‐D and 3‐D solutions is not enough. Instead, the similarity of flow pattern should be considered to determine whether a cross‐sectional model is applicable. This study improves understanding of groundwater flow induced by more natural water table undulations in the 3‐D domain and the limitations of 2‐D models accounting for cross‐sectional water table undulation only.     

基于新生代活动构造背景的地震重点危险区域综合研究——以安徽为例

基于地震的发生与断裂的活动性密切相关,为了科学合理并尽可能准确地判定未来地震重点危险区域,以安徽为例,利用由深浅部对比、宏微观构造解析所给出的新生代构造活动性最新研究成果,结合地震活动性资料研究结果,对一些重点部位的地震危险性进行了综合研究。结果表明,根据长时间尺度的地质构造最新研究揭示的活动性较强区域,与根据近代地震活动性资料研究反映的危险性较大区域,呈现较好的一致性特征,从而为未来地震重点危险区域的判定提供了新的较为可靠的依据和方法。     

沁水煤层气田高阶煤解吸气碳同位素分馏特征及其意义

沁水盆地是我国煤层气勘探开发的重要有利区,沁水煤层气田位于盆地东南部。对采自沁水煤层气田两口井的煤开展了罐解吸实验。结果表明,该地区煤层气解吸速率很快,96 h后解吸气量都达到了总解吸气量的60%~85%,720 h后解吸过程基本结束;解吸气量大,平均在18 m3/t以上。煤层气解吸过程中甲烷发生碳同位素分馏,δ13C1值变化与解吸率呈良好的线性关系,参考这种正相关关系曲线,定期监视煤层气降压排采过程中甲烷δ13C1值的变化情况,可以大致推测出该地区煤层气解吸率,从而预测煤层气的采出程度。跟踪测试沁水煤层气田A1和A1-3井在试采过程的甲烷δ13C1变化情况,推测现在采出的煤层气可能主要是煤层裂隙中以游离形式存在的煤层气,表明该区煤层气稳产性较好,资源前景广阔。     

新疆阿尔泰山南部富蕴右旋走滑断裂带晚第四纪错断水系的遥感分析研究

富蕴断裂带位于阿尔泰山南侧,横切阿尔泰山褶皱带南缘及额尔齐斯深断裂,是一条呈北北西向展布的右旋走滑断裂带。沿断裂带发育一系列错断水系、错断冲积扇、挤压脊、走滑拉分盆地等反映右旋走滑活动的典型构造地貌标志。本研究在高分辨率遥感图像和数字高程模型分析的基础上,结合野外实地构造地貌测量,对沿富蕴断裂带发育的系统错断水系特征进行了详细分析研究。研究结果表明,沿富蕴断裂带发育不同级别的错断水系,大致可划分为6级:1931年地震形成的冲沟;90m左右断距的错断水系;150m左右断距的错断水系;500m左右断距的错断水系;1500m左右断距的错断水系;2000m以上断距的错断水系。同时,结合研究区及邻区的第四纪冰川资料讨论了不同级别水系可能形成时间:恰尔沟三级支流可能形成时间为末次冰期Ⅲ阶段末期,约20ka;恰尔沟二级支流可能形成时间为末次冰期Ⅰ阶段末期,约120ka;恰尔沟一级支流可能形成于该地区冰川广泛消融的倒数第2次冰期的Ⅱ阶段末期,约为250ka;恰尔沟、水磨沟、白杨沟、乌铁布拉克河、卡布尔特河等可能形成于倒数第3次冰期Ⅱ阶段末期,约为360ka。最后,我们估算出富蕴断裂带晚第四纪以来的平均右旋走滑速率为1.46～4.99mm/a。     

Plant drought tolerance trait is the key parameter in improving the modeling of terrestrial transpiration in arid and semi-arid regions

陆面过程蒸腾作用的模拟制约着天气,气候降水预测的精确度.近几十年来,为了更好地描述植被蒸腾的水力约束,陆面过程模式发展了基于植物性状的植物水力胁迫方案.然而,我们对于植物性状在蒸腾模拟中的地位仍然缺乏了解,植物性状对蒸腾的重要性仍需进一步量化.本研究利用Morris方法评估植物性状参数在通用陆面模式植物水力胁迫方案(CoLM-P₅₀HS)中的重要性,针对17种植物性状,筛选出最为重要的:耐旱性状(P₅₀),气孔性状,和光合作用性状.在12个FLUXNET站点中,参数的重要性由归一化敏感度来衡量.P₅₀的重要性随着降水的减少而增加,而气孔性状和光合作用性状的重要性则随着降水的减少而减少.在干旱或半干旱地区,P₅₀比气孔性状和光合作用性状更重要,这意味着当植物经常经历干旱时,水力安全策略比植物生长策略更关键.而耐旱性状的巨大变异性进一步暗示了多种植物水力安全策略的共存.忽视P₅₀的变异性可能会对陆面过程模式蒸腾作用的模拟造成严重误差.因此,为了更好地表示植物水力功能的变异性,需要增加对耐旱性状的观测并耦合到陆面模式中.     

青藏高原1985年冬季异常少雪和1986年异常多雪的环流及气候特征对比研究

利用青藏高原冬季异常积雪资料对比分析了 1 985年冬季异常少雪和 1 986年冬季异常多雪时期大气环流及热带海洋特征。分析结果表明 ,高原冬季多雪与少雪时中高纬度大气环流显著不同。与此同时 ,低纬热带环流及海洋特征也有明显的差异。探讨了造成这种差异的可能原因。     

藏北高原陆面过程的模拟试验

利用NCAR陆面过程模式(Land Surface Model)和1998年"青藏高原能量与水分观测实验"加强观测期(GAME/Tibet IOP)的观测资料对青藏高原地区陆面过程进行了模拟研究.结果表明,在观测资料的强迫下模式能够较好地模拟出地表特征量的变化趋势,深层的土壤温度的模拟对初始场在0℃左右的变化敏感.模拟的感热通量、潜热通量以及地表反射的太阳辐射较观测值偏大.在高原地区地表类型分布状况的真实描述及植被、土壤参数的选取可能是提高该地区效果的首要问题;草地下垫面的陆面特征有待进一步研究;对土壤水热运动的真实描述,及冻土过程的加入对大气环流模式(GCM)跨季节的数值模拟会有所改进.