面向应用的航天遥感科学论证研究

为适应中国民用航天遥感从科学试验向业务服务模式转变,更好地探索、了解与解决应用需求与航天遥感系统对接等方面遇到的技术问题,促进航天遥感统筹协调可持续发展,中国适时于2004年成立了国家航天局航天遥感论证中心。10余年来,论证中心以航天遥感系统为研究对象,系统开展了面向应用的航天遥感科学论证概念、理论方法、技术工程与应用研究。本文是论证中心团队长期从事航天遥感科学论证研究与实践的系统总结,介绍了遥感论证初步认知、遥感论证关注问题、遥感论证理论体系与模型方法集、遥感论证能力建设及遥感论证实践等方面内容,给出了遥感论证定义并详细分析了研究范围和内容,提出了由知识维、进程维和逻辑维所组成的遥感论证作用域3维空间结构,指出社会发展加快和信息化水平提高,带动整个航天遥感数据信息链向更大规模、更短响应时间周期、更综合数据集成、更高数据质量、更加智能化方向发展,航天遥感系统将进入新的"智慧遥感"发展阶段。得益于十余年来中国民用航天快速发展,我们经历了风云三号新型载荷校飞、多角度多光谱偏振遥感器论证、环境星应用工程论证等实践,取得了多方面理论方法的突破,并应用到2030民用航天发展规划、高分辨率对地观测系统、国家自然灾害空间信息基础设施、国家民用空间基础设施中长期发展、2030中国综合地球观测系统规划等论证当中。经过不断实践,快速迭代,形成了遥感论证理论体系及相应的十大模型方法,包括遥感信息流模型、遥感信息特征模型、遥感信息应用模型、遥感信息量分析模型、遥感数据工程模型、航天遥感系统结构模型、航天遥感系统状态描述模型、航天遥感系统质量模型、航天遥感系统发展动力模型及能力体系模型。这些模型方法全面反映了航天遥感系统特征、结构、状态、发展动力、条件等,可广泛用于对航天遥感系统进行顶层设计、规划、考察、分析、评价、预测,并开展实践探索。     

基于可移动角点的航空和地面LiDAR数据配准

针对航空和地面LiDAR数据配准中点云数据的共轭特征较少且精度差异较大的问题,提出了一种基于可移动角点的航空和地面LiDAR数据配准方法:从航空和地面LiDAR数据中分别提取相应的建筑物角点,采用6参数模型对角点进行初始配准;以地面角点为参照,利用迭代移动方法对误差较大的航空角点进行修正;最后根据移动后的航空和地面角点计算获得点云配准关系。实验结果表明,该文方法可取得较好的点云配准效果,角点修正后能有效提升点云配准精度,适合于含有角点特征的航空和地面LiDAR数据配准。     

滨里海盆地东缘北特鲁瓦地区白云岩特征及其储层发育机制

白云岩是滨里海盆地盐下石炭系碳酸盐岩的重要储层类型。在岩芯、薄片、物性与地球化学等资料分析的基础上,对研究区KT-Ⅰ油组的白云岩类型与储集性能进行了分析,并探讨了其储层发育的控制因素与模式。结果表明,白云岩类型与其储集物性具有较明显的相关性,以生屑铸模孔及溶蚀扩大孔为主的残余生屑白云岩物性与含油气性最好,以晶间（溶）孔为主的粉细晶白云岩和以生屑铸模孔及晶间孔为主的泥粉晶白云岩次之,而以晶间微孔为主的泥晶白云岩最差,难以成为有效储层。原生孔隙发育的相对高能生屑滩环境是该区优质白云岩储层发育的相带基础。晚石炭世准同生期大气淡水溶蚀作用与以渗透回流白云化（白云石有序度分布于0.32～0.67,δ13C介于-0.22‰～5.94‰,δ18O介于-1.09‰～2.45‰）为主的早期白云化作用为白云岩储层早期孔隙的发育与保存奠定了坚实的基础;早二叠世以来埋藏期各类裂缝的发育及酸性流体的溶蚀作用则对储层的晚期扩孔改造至关重要。     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。     

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.     

Groundwater System Division and Description of Asia

Based on landform, climate, river system, geological structure and hydrogeological structure and from the perspective of systematology, the groundwater system of Asia can be divided into 36 secondary groundwater systems under 11 primary ones by the intercontinental scale. This forms part of the work of the groundwater series map of Asia, which is compiled according to groundwater system division and evaluation of the total amount and types of aquifer, reflecting the large-scale features of groundwater resources in Asia. Systematic profiling of groundwater in this way provides a scientific basis for groundwater exploitation planning and management in Asia, and avoiding disputes over groundwater resources and the environment among Asian countries.     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

三维遥感影像在遥感地质构造解译中的应用——以福建平和植被覆盖区为例

文章通过建立福建平和矾山三维遥感影像和线环构造解译标志,对区内芦溪—霞寨断裂、坪水断裂等典型断裂以及钟腾破火山口进行了解译。基于三维遥感影像可较好地识别构造解译标志,提高遥感构造解译的精度,降低解译的难度。     

南水北调中线突发水污染事件的快速预测

依据南水北调中线干渠资料,开展了正常输水情况下串联明渠内可溶污染物浓度分布规律数值模拟研究。采用数值模拟、数学归纳和统计分析方法,提出表征污染物输移扩散特征的峰值输移距离、污染带长度和峰值浓度的快速预测公式;通过示范工程验证了快速预测公式的可行性。结果表明:①串联明渠内,峰值输移距离随渠道流速减小而减小,并且污染带长度增加值随明渠内流速减小而减小,但是峰值浓度随明渠流速减小而增加;②快速预测公式计算结果与现场试验实测结果的误差均不到15%,证明了快速预测公式的合理性和可行性。这些研究结果为南水北调中线工程突发可溶性水污染事件应急预警方案的制定提供了科学依据。