基于GEOWAY CIPS大比例尺正射影像快速生产的方法研究

面对经济社会发展急需大量影像数据支撑的现状,本文提出了基于GEOWAY CIPS大比例尺正射影像快速生产的方法,分析了基于GEOWAY CIPS影像处理的关键技术流程,总结了该生产流程的优势与不足,并通过实际项目,验证了本文生产方法的高效性与可靠性。     

Error analysis of the 3D similarity coordinate transformation

The 3D similarity coordinate transformation with the Gauss–Helmert error model is investigated. The first-order error analysis of an analytical least-squares solution to this problem is developed in detail. While additive errors are assumed in the translation and scale estimates, a 3 × 1 multiplicative error vector is defined to effectively parameterize the rotation matrix estimation error. The propagation of the errors in the coordinate measurements to the errors in the estimated transformation parameters is derived step-by-step, and the formulae for calculating the variance–covariance matrix of the estimated parameters are presented.     

城市交通网络分形维数的不确定性估计、控制与分析

长度-半径维数模型作为描述城市交通网络复杂不确定性现象的一种分形分维方法,其自身存在的不确定性往往被忽视,且相关研究更是鲜见报道。故针对该模型在分形维数测算全过程中存在的不确定性问题,本文率先开展了系统剖析、定量估计和质量控制研究。首先对数据源、矢量化处理、测算中心、尺度选择、以及分维数模型估计等一系列环节进行了不确定性估计与分析,其中首次给出了分形维数在一定置信水平下的不确定性度量区间,并依据误差传播理论对误差的传递和累积进行了描述;然后着重提出了基于LMed S(Least Median of Squares)的质量控制方法。最后通过对拉萨市的算例实验表明:道路的矢量化过程、测算中心和测算尺度的选择都会导致分维的不确定性;并在对数据质量进行控制的基础上,通过置信区间对长度-半径维数模型的不确定性进行了在一定概率水平下的首次度量;同时结合区域现状对研究结果给出了合乎实际的解释。本文在描述表征不确定性问题的分形几何和分形维数的基础上,系统地揭示了其自身不确定性的本质,不仅进一步丰富了分形分维理论,为控制其质量奠定理论基础,而且可为城市交通网络分形维数的地学应用提供可靠的科学依据。     

Enrichment Patterns and New Discovery of Deep Lacustrine Shale Oil in the Upper Cretaceous Qingshankou Formation,Songliao Basin,NE China

正Objective The Songliao Basin is located in northeastern China. The Upper Cretaceous Qingshankou Formation(Fm.)(K2 qn), Yaojia Fm.(K2 y), and Nenjiang Fm.(K2 n) were deposited in its depression. The sediments are mainly continental clastic rocks. The first member of the Qingshankou Fm.(K2 qn1) in the southern Songliao Basin mainly comprises semi-deep to deep lacustrine shale of large thickness, generally 30,100 m, with wide distribution; the thickness of the shale has an average thickness of 70 m.     

油库自动化计量软件系统应用分析与改进实现

对国内外众多油库目前投入使用的各种计量系统进行分析,剖析其各自的优缺点,并结合国际国内的现场总线技术的发展趋势,给出一个更加合理的现代化自动计量系统的系统构架,并使用Ｃ＃和ＳＱＬＳｅｒｖｅｒ实现软件系统．     

钢筋混凝土框架结构耗能分析

本文从能量的观点,利用CANNY程序对普通钢筋混凝土框架结构进行了分析.通过对3种不同框架结构在不同地震动(31条)输入下的能量反应分析,研究了滞回耗能及阻尼耗能与总输入能的关系.针对本文模型的计算结果,给出了滞回耗能与总输入能关系的表达式,并初步探讨了其影响系数.研究表明,滞回耗能及阻尼耗能与总输入能之间有良好的线性关系.     

不同定位模式下北斗单基站CORS定位精度分析

单基站CORS相对于多基站CORS具有成本低、建设时间短等优点.本文对北斗系统单基站RTD/RTK定位模型进行分析研究,并通过对实测数据对算法进行分析验证,RTD定位在东方向精度可以达到0.3 m,北方向精度可以达到0.4 m,高程精度可以达到0.8 m.RTK定位在平面精度可以达到1 cm,高程精度可以达到3 cm,...     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Large-scale laboratory measurements of solitary wave inundation on a 1:20 slope

The run-up flow and related pressure of solitary waves breaking on a 1:20 plane beach were investigated experimentally in a super tank (300 m × 5 m × 5.2 m). Swash flow measurements of flow velocities are compared with an existing analytical solution. By incorporating an analytical solution, the hydrodynamic pressure for a quasi-steady flow state is determined and compared with laboratory data. Concerning the evident extra pressure exerted by the impact of swash flow, an empirical drag coefficient for a circular plate is also suggested in the present study.