Building zoned ignimbrites by recycling silicic cumulates: insight from the 1,000 km<Superscript>3</Superscript> Carpenter Ridge Tuff,CO

The ~1,000 km³ Carpenter Ridge Tuff (CRT), erupted at 27.55 Ma during the mid-tertiary ignimbrite flare-up in the western USA, is among the largest known strongly zoned ash-flow tuffs. It consists primarily of densely welded crystal-poor rhyolite with a pronounced, highly evolved chemical signature (high Rb/Sr, low Ba, Zr, Eu), but thickly ponded intracaldera CRT is capped by a more crystal-rich, less silicic facies. In the outflow ignimbrite, this upper zone is defined mainly by densely welded crystal-rich juvenile clasts of trachydacite composition, with higher Fe–Ti oxide temperatures, and is characterized by extremely high Ba (to 7,500 ppm), Zr, Sr, and positive Eu anomalies. Rare mafic clasts (51–53 wt% SiO₂) with Ba contents to 4,000–5,000 ppm and positive Eu anomalies are also present. Much of the major and trace-element variations in the CRT juvenile clasts can be reproduced via in situ differentiation by interstitial melt extraction from a crystal-rich, upper-crustal mush zone, with the trachydacite, crystal-rich clasts representing the remobilized crystal cumulate left behind by the melt extraction process. Late recharge events, represented by the rare mafic clasts and high-Al amphiboles in some samples, mixed in with parts of the crystal cumulate and generated additional scatter in the whole-rock data. Recharge was important in thermally remobilizing the silicic crystal cumulate by partially melting the near-solidus phases, as supported by: (1) ubiquitous wormy/sieve textures and reverse zoning patterns in feldspars and biotites, (2) absence of quartz in this very silicic unit stored at depths of >4–5 km, and (3) heterogeneous melt compositions in the trachydacite fiamme and mafic clasts, particularly in Ba, indicating local enrichment of this element due mostly to sanidine and biotite melting. The injection of hot, juvenile magma into the upper-crustal cumulate also imparted the observed thermal gradient to the deposits and the mixing overprint that partly masks the in situ differentiation process. The CRT provides a particularly clear perspective on processes of in situ crystal-liquid separation into a lower crystal-rich zone and an upper eruptible cap, which appears common in incrementally built upper-crustal magma reservoirs of high-flux magmatic provinces.     

Molecular modeling of Al and benzene interactions with Suwannee fulvic acid

The effects that Al³⁺ and benzene interactions exhibit on a model fulvic acid were investigated. Energy minimizations of the structures mimicking the interactions of Al³⁺-Suwannee fulvic acid (SFA), benzene-SFA and Al³⁺-benzene-SFA were run with a solvation sphere of 60 H₂O molecules with the semi-empirical methods PM3 and PM5. The semi-empirical method PM3 was run with Gaussian 98 and CAChe Workstation Pro 6.1.1 to compare the results of the energy minimization algorithms in the two programs. PM5 calculations were run with CAChe Workstation Pro 6.1.1. Molecular dynamics (MD) simulations were run in Cerius² (Accelrys Inc., San Diego, CA) using the Universal Force Field (UFF) 1.02 [Rappé A. K., Casewit C., Colwell K., Goddard W., and Skiff W. (1992) UFF, a full periodic-table force-field for molecular mechanics and molecular dynamics simulations. J. Am. Chem. Soc.114(25), 10024-10035] and COMPASS force field [Sun H. (1998) COMPASS: an ab initio force-field optimized for condensed-phase applications—overview with details on alkane and benzene compounds. J. Phys. Chem. B102, 7338-7364]. Single point calculations were run on the minimized structures at the B3LYP/6-31G(d) level to obtain more accurate estimates of the energy on the minimized structures derived from the PM3, PM5, and UFF methods and to normalize energies to the same reference state. This methodology was used as the standard of comparison for all the models to assess whether or not a given configuration was reasonably stable.The PM3/G03 energy minimizations predicted the lowest B3LYP/6-31G(d) potential energies of the methodologies examined in this study. Thus, this method is considered the most reliable of those tested. The PM3/G03 method predicted that there would be aromatic-aromatic interactions between benzene and SFA. The presence of Al³⁺ was predicted not to interfere with aromatic-aromatic interactions between benzene and SFA, but benzene may influence the location of metal complexation to SFA.     

Forgotten coast,forgotten people: sustainable development and disproportionate impacts from Hurricane Michael in Gulf County,Florida

Natural Hazards - A central challenge for sustainable development is how societies are to avoid, minimize or address impacts from anthropogenic climate change. However, competing perspectives on...     

Similarity Scaling Over a Steep Alpine Slope

In this study, we investigate the validity of similarity scaling over a steep mountain slope (30–41 $^\circ $ ). The results are based on eddy-covariance data collected during the Slope Experiment near La Fouly (SELF-2010); a field campaign conducted in a narrow valley of the Swiss Alps during summer 2010. The turbulent fluxes of heat and momentum are found to vary significantly with height in the first few metres above the inclined surface. These variations exceed by an order of magnitude the well-accepted maximum 10 % required for the applicability of Monin–Obukhov similarity theory in the surface layer. This could be due to a surface layer that is too thin to be detected or to the presence of advective fluxes. It is shown that local scaling can be a useful tool in these cases when surface-layer theory breaks down. Under convective conditions and after removing the effects of self-correlation, the normalized standard deviations of slope-normal wind velocity, temperature and humidity scale relatively well with $z/\varLambda $ , where $z$ is the measurement height and $\varLambda (z)$ the local Obukhov length. However, the horizontal velocity fluctuations are not correlated with $z/\varLambda $ under all stability regimes. The non-dimensional gradients of wind velocity and temperature are also investigated. For those, the local scaling appears inappropriate, particularly at night when shallow drainage flows prevail and lead to negative wind-speed gradients close to the surface.     

Stable carbon isotope ratios in lake and swamp sediments as a proxy for prehistoric forest clearance and crop cultivation in the Neotropics

Close correspondence between stable carbon isotope ratios ( ¹³ C), pollen, and charcoal profiles in sediment cores from Laguna Zoncho and Machita swamp, Costa Rica, shows that prehistoric forest clearance and crop cultivation can be detected in the stable carbon isotope ratios of total organic carbon ( ¹3C _TOC ). Analyses of δ 13C _TOC complement evidence from pollen, charcoal, and phytoliths and provide a proxy that is sensitive to the intensity and/or proximity to core sites of prehistoric forest clearance and agriculture in watersheds. Stable carbon isotope analyses are particularly useful in situations in which other evidence of forest clearance and agriculture is limited.     

The variation and controls of mean transit times in Australian headwater catchments

Determining mean transit times in headwater catchments is critical for understanding catchment functioning and understanding their responses to changes in landuse or climate. Determining whether mean transit times (MTTs) correlate with drainage density, slope angle, area, or land cover permits a better understanding of the controls on water flow through catchments and allows first-order predictions of MTTs in other catchments to be made. This study assesses whether there are identifiable controls on MTTs determined using ³H in headwater catchments of southeast Australia. Despite MTTs at baseflow varying from a few years to >100 years, it was difficult to predict MTTs using single or groups of readily-measured catchment attributes. The lack of readily-identifiable correlations hampers the prediction of MTTs in adjacent catchments even where these have similar geology, land use, and topography. The long MTTs of the Australian headwater catchments are probably in part due to the catchments having high storage volumes in deeply-weathered regolith, combined with low recharge rates due to high evapotranspiration. However, the difficulty in estimating storage volumes at the catchment scale hampers the use of this parameter to estimate MTTs. The runoff coefficient (the fraction of rainfall exported via the stream) is probably also controlled by evapotranspiration and recharge rates. Correlations between the runoff coefficient and MTTs in individual catchments allow predictions of MTTs in nearby catchments to be made. MTTs are shorter in high rainfall periods as the catchments wet up and shallow water stores are mobilized. Despite the contribution of younger water, the major ion geochemistry in individual catchments commonly does not correlate with MTTs, probably reflecting heterogeneous reactions and varying degrees of evapotranspiration. Documenting MTTs in catchments with high storage volumes and/or low recharge rates elsewhere is important for understanding MTTs in diverse environments.     

Verification of tropical cyclone deposits with oxygen isotope analyses of coeval ostracod valves

Reconstruction of prehistoric tropical cyclone (TC) activity often relies on the identification of distinctive overwash deposits (tempestites) in coastal lagoon sediments. Similar sediment deposits, however, can result from high-energy events other than TCs. In this study we assessed the utility of using the geochemistry of ostracod valves, specifically their stable oxygen isotope composition (δ¹⁸O), as a potential validation variable that could reduce the chances of misidentifying an overwash deposit as having been generated by a TC, when in fact it formed from another high-energy depositional process (type 1 error). We applied this technique to a sediment core recovered from Laguna Alejandro, Dominican Republic, which had already been analyzed for other sedimentary TC proxies. Negative δ¹⁸O anomalies identified in the ostracod valve stable isotope record are associated with TC deposits and are most easily explained by large influxes of ¹⁸O-depleted meteoric waters typical of intense tropical storms. There is potential for this technique to be used to identify TC landfalls that are not represented by overwash deposits. We, however, propose a more conservative approach and suggest this technique be used to validate the origin of a storm deposit and reduce the odds of a type 1 error.     

Analytical and Numerical Modeling of Solute Intrusion,Recovery, and Rebound in Fractured Bedrock

Contaminated groundwater in fractured bedrock can expose ecosystems to undesired levels of risk for extended periods due to prolonged back-diffusion from rock matrix to permeable fractures. Therefore, it is key to characterize the diffusive mass loading (intrusion) of contaminants into the rock matrix for successful management of contaminated bedrock sites. Even the most detailed site characterization techniques often fail to delineate contamination in rock matrix. This study presents a set of analytical solutions to estimate diffusive mass intrusion into matrix blocks, it is recovered by pumping and concentration rebound when pumping ceases. The analytical models were validated by comparing the results with (1) numerical model results using the same model parameters and (2) observed chloride mass recovery, rebound concentration, and concentration in pumped groundwater at a highly fractured bedrock site in Alberta, Canada. It is also demonstrated that the analytical solutions can be used to estimate the total mass stored in the fractured bedrock prior to any remediation thereby providing insights into site contamination history. The predictive results of the analytical models clearly show that successful remediation by pumping depends largely on diffusive intrusion period. The results of initial mass from the analytical model was used to successfully calibrate a three-dimensional discrete fracture network numerical model further highlighting the utility of the simple analytical solutions in supplementing the more detailed site numerical modeling. Overall, the study shows the utility of simple analytical methods to support long-term management of a contaminated fractured bedrock site including site investigations and complex numerical modeling.     

Synoptic surveys of lakes Rotorua and Rotoiti

Surface and bottom water samples were collected from 39 widely spaced stations in Lake Rotorua in February 1967 and from 12 stations in Lake Rotoiti in March 1967. In Lake Rotorua, data obtained from these samples showed that small horizontal differences existed between the southern and northern parts of the lake probably related to the higher inflow of plant nutrients at the southern end and to the prevailing southerly wind concentrating phytoplankton populations at the northern end. Lake Rotoiti, which differed from Lake Rotorua in being thermally stratified, showed no important horizontal differences, Vigorous mixing in the strata probably being accomplished by deep seiches except in the shallow western basin of the lake, where the inflow from Lake Rotorua occurs. Serial vertical hauls for a zooplankton survey of Lake Rotoiti were taken from three stations in March 1967. The distribution of zooplankton was complex because diurnal vertical migrations of the animals were combined with horizontal movement of the water layers.     

Observations of Thin Layers in Coastal Hawaiian Waters

Thin layers of plankton have been documented in a wide variety of environments. The growing body of observations indicates that these features are a critical component of marine ecosystem dynamics and functioning. In the past two decades, much of the research on thin layers was undertaken in temperate coastal waters. Here, we report the first known observations of thin layers of phytoplankton in tropical Hawaiian waters. We conducted an overnight shipboard study during which time we made high-resolution observations of physical and optical structure in the water column. During the overnight cruise, we observed the greatest number of thin layers in the early evening hours when thermal stratification was strongest and most persistent due to a combination of warm air and surface water, as well as light winds. A comparison of these observations with those from temperate regions leads us to hypothesize that the nature and persistence of the physical structure is very important in determining the persistence of thin layered structures. Because plankton biomass is generally lower in tropical regions, the heterogeneous aggregation of food in thin subsurface layers may be more critical to the marine ecosystem than it is in temperate regions where plankton are generally more abundant.