Multi-disciplinary earthquake researches in Western Turkey: Hints to select sites to study geochemical transients associated to seismicity

Warm and hot spring water as well as soil gas radon release patterns have been monitored in the Aegean Extensional Province of Western Turkey, alongside regional seismic events, providing a multi-disciplinary approach. In the study period of 20 months, seven moderate earthquakes with M _L between 4.0 and 4.7 occurred in this seismically very active region; two earthquakes with magnitude 5.0 also occurred near the study area. Seismic monitoring showed no foreshock activity. By contrast, hydro-geochemical anomalies were found prior to these seismic events, each lasting for weeks. The anomalies occurred foremost in conjunction with dip-slip events and seem to support the dilatancy and water diffusion hypothesis. Increased soil gas radon release was recorded before earthquakes associated with strike-slip faults, but no soil radon anomalies were seen before earthquakes associated with dip-slip faults. Geochemical anomalies were also noticeably absent at some springs throughout the postulated deformation zones of impending earthquakes. The reason for this discrepancy might be due to stress/strain anisotropies.     

Planktonic foraminiferal biostratigraphy of the Coniacian-Maastrichtian sequences of the Bey Dağları Autochthon,western Taurides,Turkey: thin-section zonation

Planktonic foraminifer distributions in seventeen stratigraphic sections of Upper Cretaceous hemipelagic and pelagic sequences of northern Bey Da?lar? Autochthon (western Taurides) yield six biozones such as, Dicarinella concavata Interval Zone, Dicarinella asymetrica Range Zone, Radotruncana calcarata Range Zone, Globotruncana falsostuarti Partial Range Zone, Gansserina gansseri Interval Zone, and Abathomphalus mayaroensis Concurrent Range Zone. Two of the zones, Dicarinella concavata Zone and Dicarinella asymetrica Zone, are identified in the massive hemipelagic limestones of the Bey Da?lar? Formation, of Coniacian-Santonian age. They are characterized by scarce planktonic foraminifera and abundant calcisphaerulids. The other four biozones are determined from the cherty pelagic limestones of the Akda? Formation and indicate a late Campanian-late Maastrichtian time interval. The planktonic foraminifera observed in these four biozones are diverse, complex morphotypes (K-selection), suggesting open oceans. The assemblage of the Abathomphalus mayaroensis Zone shows that the latest Maastrichtian record is absent throughout the northern part of the autochthon. Two main sedimentary hiatuses are recognized within the Upper Cretaceous pelagic sequence. Early to middle Campanian and latest Maastrichtian-middle Paleocene planktonic foraminifera are absent in all measured stratigraphic sections. Hiatus durations differ between sections as a result of diachronism of onset of the hemipelagic and pelagic deposition and the post-Santonian and post-Maastrichtian erosional phases. Drowning event and the early-middle Campanian and latest Maastrichtian-middle Paleocene hiatuses in the pelagic sequence are attributed to regional tectonics during the Late Cretaceous.     

Comparison of Treatment Efficiency and Energy Consumption of Batch and Continuous Electrocoagulation in Urban Wastewater

In this study, domestic wastewater was used as the electrolyte. The work was carried out with an up-flow tubular reactor, made of stainless steel that was used as cathode, while the anode electrode material was aluminum and varying values of flow regime (25, 50, 75 and 100 mL/s for continuous system), initial pH value (5, 6, 7 and 7.8) and current intensity (10, 15 and 20 A) were applied. For domestic wastewater with natural pH, the effluent pH was >9 in the batch system, while in the continuous system the pH was 8–8.5. Likewise, while the effluent temperature was up to 60°C in the batch system, it was at most 35°C in the continuous system. However, the energy consumption values in the continuous system were considerably lower compared with the batch system. At a current intensity of 10 A, 80 kWh of energy per unit volume was consumed in the batch system, while it was 50 kWh for the continuous system. The present results show that the batch system can be used for small wastewater streams whereas the continuous system can be used for large wastewater streams for domestic wastewater treatment.     

An analysis of precipitation climatology in Jordan

Summary ?One of the most important features in analysing the climatology of any region is to study the precipitation and its periodicity of different harmonics in order to study the behavior of the observed data. In this study the amplitude of frequencies, phase angle and basic statistical parameters are calculated in order to depict spatial characteristics of precipitation over Jordan. Precipitation records of 17 stations were chosen according to climatic regions of Jordan. The first and second harmonic analyses explain more than 90% of the precipitation variation in Jordan effectively. The amplitudes of the first and second harmonic were calculated in order to describe the climatic regions in the country. The maximum amplitudes were found in the northern mountainous region. The phase angle representing the time of maximum rainfall is also used in the form of a contour chart. It is found that Jordan has its main rainfall season in winter with maximum around January. The coefficient of variation shows the high variability of rainfall of the country. Received February 4, 2002; revised August 1, 2002; accepted August 6, 2002     

Geochemistry of mafic rocks of the Karakaya complex,Turkey: evidence for plume-involvement in the Palaeotethyan extensional regime during the Middle and Late Triassic

The Karakaya Complex within the Early Mesozoic Cimmerian Orogeny in northern Turkey represents the remnants of the Palaeotethys. It includes slivers and/or mega-blocks of slightly metamorphic basic volcanic rocks associated with fossiliferous sediments as well as hypabyssal and intrusive rocks with basaltic-andesitic to ultramafic compositions. They display two distinct compositional groups; namely alkaline and variably tholeiitic. The alkaline basalt samples are more akin to oceanic-island basalts (OIB) with relatively enriched trace element characteristics together with strong partitioning in HREE ([La/Yb]_N = 5.8–16.2), suggesting that garnet is present as a residual phase in the source of those basalts. The variably tholeiitic samples apart from diabases display E-MORB characteristics; being relatively depleted compared to the alkaline counterparts and less fractionated REE patterns ([La/Yb]_N = 2.1–3.6). The diabases, on the other hand, are distinctively different with a significant negative Nb anomaly (Zr/Nb = 28.9–43.4) and flat REE patterns ([La/Yb]_N = 0.8–1.4), suggesting their generation above a supra-subduction zone, probably a back-arc basin. These results may suggest that a mantle plume-related magmatism associated with extensional oceanic system should have been installed within Palaeotethys during Middle-Late Triassic time, which was then incorporated into subduction–accretion prism forming the final picture, that is, “the Karakaya Complex”.     

Diverse tectonic settings of formation of the metaigneous rocks in the Jurassic metamorphic accretionary complexes (Refahiye,NE Turkey) and their geodynamic implications

Two isolated metamorphic accretionary complexes of Jurassic age, the Refahiye and Kurtlutepe metamorphic rocks, crop out as tectonic slices within the coeval suprasubduction-zone ophiolite at the southern margin of the Eastern Pontides (NE Turkey), close to the ?zmir-Ankara-Erzincan suture. The Refahiye metamorphic rocks are made up of greenschist, marble, serpentinite, phyllite and minor garnet amphibolite, garnet micaschist and metachert. The whole unit was metamorphosed under garnet-amphibolite-facies conditions and strongly retrogressed during exhumation. The Kurtlutepe metamorphic rocks consist of subgreenschist-facies metavolcanics, metavolcaniclastics, marble, calc-phyllite, and minor serpentinite and metachert. Metabasites in the Refahiye metamorphic rocks are represented by four distinct geochemical affinities: (i) cumulate “flavor,” (ii) alkaline oceanic island basalt (OIB), (iii) enriched mid-ocean ridge basalt (E-MORB) and (iv) tholeiitic island arc basalt (IAB). On the other hand, the Kurtlutepe metavolcanic rocks display only tholeiitic to calc-alkaline island arc geochemical affinities. The metabasic rocks with OIB affinities were interpreted as parts of the accreted oceanic islands, and those with E-MORB affinities as parts of accreted ridge segments close to oceanic islands and/or plume-distal mid-ocean ridges with a mantle previously metasomatized by plume components. The metabasic rocks with IAB affinities might have been derived from the overlying suprasubduction ophiolite and/or arc domain by a number of tectonic or sedimentary processes including tectonic slicing of accretionary complex and overlying fore-arc ophiolite, juxtaposition of the magmatic arc with subduction zone by strike slip faults, submarine gravity sliding and debris flows or subduction erosion. However, totally recrystallized nature of the metabasic rocks together with field relations does not allow any inference on the processes involved. The Kurtlutepe metavolcanic rocks might represent collided and accreted oceanic island arc with the subduction zone. Attempted subduction of an intraoceanic island arc may also explain the magmatic lull during Late Jurassic–Early Cretaceous in the Eastern Pontides.     

Second order rotational effect on the oscillation frequencies of V1162 Ori

V1162 is a δ-Scuti type variable star for which a rotational velocity of V  sini=46±4 km s⁻¹ has been observed. The star has been modelled according to its observed parameters and oscillation frequencies. The results obtained by approximating rotation to the first order have been compared with the ones provided by new calculations that include rotation up to the second order. We found that second order rotation term should be included in frequency calculations for comparatively high rotation speeds.     

An empirical attenuation relationship for Northwestern Turkey ground motion using a random effects approach

Using a random effects model that takes into consideration the correlation of data recorded by a single seismic event, a database consisting of 195 recordings from 17 recent events is employed to develop empirical attenuation relationships for the geometric mean of horizontal peak ground acceleration and 5-percent damped spectral acceleration (S_a). The recordings employed are obtained from strong motion stations operating in Northwestern Turkey and resulted from events that include the Kocaeli (M_w=7.4) and the Düzce (M_w=7.1) earthquakes and their aftershocks as well as other events. By studying differences in standard errors, the random effects model is compared with a fixed effects model that does not account for distinctions between intra- and inter-event variability. Effects of local site conditions are included in the empirical relationships developed. The dependence on frequency of the various model parameters is also studied. Frequency-dependent attenuation coefficients for the proposed random effects models developed are summarized in tables to facilitate their use.     

Constructing a 3D structural block diagram of the Central Basin in Marmara Sea by means of bathymetric and seismic data

In this study we made a comparative interpretation of multibeam bathymetric and seismic reflection data with different resolutions and penetration properties collected in the Central Basin of the Marmara Sea. Our main objectives were (i) to investigate and compare the active tectonic deformation observed on the sea bottom and within the uppermost sedimentary layers to that of the deep-seated deformation within the limits of resolution and penetration of the available geophysical data and (ii) to build a three-dimensional (3D) block diagram of the active tectonic and buried features by means of a sliced mapping technique. In this approach, we produced slice maps of the active and buried structural features at selected depths and then combined them to form a 3D structural block diagram. Motivation for our work was to produce a 3D structural diagram to derive a more detailed image of the structural features in the Central Basin where there is no available 3D seismic data. The observations from the bathymetry and seismic data and developed 3D diagram support the presence of a through-going strike-slip fault that forms a rotational depression zone against a right-stepping strike-slip faulting causing a pull-apart basin in the Central Depression zone.     

The Bekten Fault: the palaeoseismic behaviour and kinematic characteristics of an intervening segment of the North Anatolian Fault Zone,Southern Marmara Region,Turkey

The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.