Landslide Research at the British Geological Survey:Capture,Storage and Interpretation on a National and Site-Specific Scale

Abstract: Landslide research at the British Geological Survey (BGS) is carried out through a number of activities, including surveying, database development and real-time monitoring of landslides. Landslide mapping across the UK has been carried out since BGS started geological mapping in 1835. Today, BGS geologists use a combination of remote sensing and ground-based investigations to survey landslides. The development of waterproof tablet computers (BGS·SIGMAmobile), with inbuilt GPS and GIS for field data capture provides an accurate and rapid mapping methodology for field surveys. Regional and national mapping of landslides is carried out in conjunction with site-specific monitoring, using terrestrial LiDAR and differential GPS technologies, which BGS has successfully developed for this application. In addition to surface monitoring, BGS is currently developing geophysical ground-imaging systems for landslide monitoring, which provide real-time information on subsurface changes prior to failure events. BGS’s mapping and monitoring activities directly feed into the BGS National Landslide Database, the most extensive source of information on landslides in Great Britain. It currently holds over 14?000 records of landslide events. By combining BGS’s corporate datasets with expert knowledge, BGS has developed a landslide hazard assessment tool, GeoSure, which provides information on the relative landslide hazard susceptibility at national scale.     

Laboratory studies on the sputtering contribution to the sodium atmospheres of Mercury and the Moon

To ascertain the importance of sputtering by solar wind ions on the formation of a sodium exosphere around Mercury and the Moon, we have irradiated with 4 keV He ions, the Na bearing tectosilicates: albite, labradorite, and anorthoclase, as well as adsorbed Na layers deposited on albite and on olivine (a neosilicate that does not contain Na). Sodium at the surface and near surface (<40 Å) was quantified with X-ray photoelectron spectroscopy before and after each irradiation to determine the depletion cross section. We measured a cross section for sputtering of Na adsorbed on mineral surfaces, σ_s ≈ 1 × 10^?15 cm² atom^?1. In addition, mass spectrometric analyses of the sputtered flux show that a large fraction of the Na is sputtered as ions rather than as neutral atoms. These results have strong implications for modeling the sodium population within the mercurian and the lunar exospheres.     

Re-Suspension Technique for Improving Organic Rich Sediment-Water Quality in a Shallow Sea Area

The re-suspension method consists of (1) dispersion of the sediment by air-water jets, (2) pumping of the suspension (small particles and organic matter), (3) settlement in a tank, (4) filtration and (5) disposal of solids (followed by incineration in this case). The pilot test was performed to clean up an area of 3000 m². The dispersed depth of the bottom was approximately 50 cm. The time spent for the work was two weeks. The amount of re-suspended solid removed from the bottom was about 8 tonnes in dry mass. Since the solids contain high concentrations of chemical oxygen demand (COD), total phosphorous (T-P), total nitrogen (T-N) and sulfides, the remaining sediment was considerably improved. Quantitative analyses showed that the full-scale implementation would enable the removal of about 10% of the re-suspended solids, and reduce COD by 95%, T-P by 50%, T-N by 100% and sulfide by 75% for re-deposited sediments in comparison to the original sediments.     

Photochemical degradation of phenanthrene as a function of natural water variables modeling freshwater to marine environments

Photolysis rates of phenanthrene as a function of ionic strength (salinity), oxygen levels and humic acid concentrations were measured in aqueous solution over the range of conditions found in fresh to marine waters. Photolysis followed first order kinetics, with an estimated photodegradation half-life in sunlight in pure water of 10.3±0.7h, in the mid-range of published results. Photolysis rate constants decreased by a factor of 5 in solutions with humic acid concentrations from 0 to 10 mg C L(-1). This decrease could be modeled entirely based on competitive light absorption effects due to the added humics. No significant ionic strength or oxygen effects were observed, consistent with a direct photolysis mechanism. In the absence of significant solution medium effects, the photodegradation lifetime of phenanthrene will depend only on solar fluxes (i.e. temporal and seasonal changes in sunlight) and not vary with a freshwater to marine environment.     

Shifting accountabilities? Understanding the connections between national and provincial fisheries in Papua New Guinea

This paper examines the effects of fisheries decentralization strategies in Papua New Guinea. The paper assess the financial, human resources, information, and institutional mechanisms that the National Fisheries Authority uses to connect with provincial fisheries offices to show the consequences of institutional reforms. The findings suggest both intended and unintended effects, particularly in terms of shifting accountabilities and loyalty. These findings are broadly applicable to decentralization and institutional change scholars and practitioners interested in understanding how governments implement institutional change reforms and the effects of this implementation.     

Seismic stratigraphy of Lago Puyehue (Chilean Lake District): new views on its deglacial and Holocene evolution

Prior to the collection of a series of sediment cores, a high- and very-high-resolution reflection seismic survey was carried out on Lago Puyehue, Lake District, South-Central Chile. The data reveal a complex bathymetry and basin structure, with three sub-basins separated by bathymetric ridges, bedrock islands and interconnected channels. The sedimentary infill reaches a thickness of >200 m. It can be sub-divided into five seismic-stratigraphic units, which are interpreted as: moraine, ice-contact or outwash deposits (Unit I), glacio-lacustrine sediments rapidly deposited in a proglacial or subglacial lake at the onset of deglaciation (Unit II), lacustrine fan deposits fed by sediment-laden meltwater streams in a proglacial lake (Unit III), distal deposits of fluvially derived sediment in an open, post-glacial lake (Unit IV) and authigenic lacustrine sediments, predominantly of biogenic origin, that accumulated in an open, post-glacial lake (Unit V). This facies succession is very similar to that observed in other glacial lakes, and minor differences are attributed to an overall higher depositional energy and higher terrigenous input caused by the strong seismic and volcanic activity in the region combined with heavy precipitation. A long sediment core (PU-II core) penetrates part of Unit V and its base is dated as 17,915 cal. yr. BP. Extrapolation of average sedimentation rates yields an age of ca. 24,750 cal. yr. BP for the base of Unit V, and of ca. 28,000 cal. yr. BP for the base of Unit IV or for the onset of open-water conditions. This is in contrast with previous glacial-history reconstructions based on terrestrial records, which date the complete deglaciation of the basin as ca. 14,600 cal. yr. BP. This discrepancy cannot be easily explained and highlights the need for more lacustrine records from this region. This is the second in a series of eight papers published in this special issue dedicated to the 17,900 year multi-proxy lacustrine record of Lago Puyehue, Chilean Lake District. The papers in this special issue were collected by M. De Batist, N. Fagel, M.-F. Loutre and E. Chapron.     

Biofilm Detection in a Model Well‐Bore Environment Using Low‐Field NMR

This research addresses the challenges of the lack of non‐invasive methods and poor spatiotemporal resolution associated with monitoring biogeochemical activity central to bioremediation of subsurface contaminants. Remediation efforts often include growth of biofilm to contain or degrade chemical contaminants, such as nitrates, hydrocarbons, heavy metals, and some chlorinated solvents. Previous research indicates that nuclear magnetic resonance (NMR) is sensitive to the biogeochemical processes of biofilm accumulation. The current research focuses on developing methods to use low‐cost NMR technology to support in situ monitoring of biofilm growth and geochemical remediation processes in the subsurface. Biofilm was grown in a lab‐scale radial flow bioreactor designed to model the near wellbore subsurface environment. The Vista Clara Javelin NMR logging device, a slim down‐the‐borehole probe, collected NMR measurements over the course of eight days while biofilm was cultivated in the sand‐packed reactor. Measured NMR mean log T₂ relaxation times decreased from approximately 710 to 389 ms, indicating that the pore environment and bulk fluid properties were changing due to biofilm growth. Destructive sampling employing drop plate microbial population analysis and scanning electron and stereoscopic microscopy confirmed biofilm formation. Our findings demonstrate that the NMR logging tool can detect small to moderate changes in T₂ distribution associated with environmentally relevant quantities of biofilm in quartz sand.     

Elasticity of antigorite,seismic detection of serpentinites,and anisotropy in subduction zones

Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic V_P/V_S ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. V_P varies between 8.9 km s^? 1 and 5.6 km s^? 1 (46% anisotropy), and 8.3 km s^? 1 and 5.8 km s^? 1 (37%), and V_S between 5.1 km s^? 1 and 2.5 km s^? 1 (66%), and 4.7 km s^? 1 and 2.9 km s^? 1 (50%) for the single-crystal and aggregate, respectively. The V_P/V_S ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high V_P/V_S ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s^?1 for V_P and V_S, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.