The May 2005 eruption of Fernandina volcano,Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45–60°) toward the caldera at the surface and more gently dipping (~12–14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another.     

Indirect Boundary Element Method applied to fluid–solid interfaces

In this paper scattering of elastic waves in fluid–solid interfaces is investigated. We use the Indirect Boundary Element Method to study this wave propagation phenomenon in 2D models. Three models are analyzed: a first one with an interface between two half-spaces, one fluid on the top part and the other solid in the bottom; a second model including a fluid half-space above a layered solid; and finally, a third model with a fluid layer bounded by two solid half-spaces. The source, represented by Hankel's function of the second kind, is always applied in the fluid. This indirect formulation can give to the analyst a deep physical insight on the generated diffracted waves because it is closer to the physical reality and can be regarded as a realization of Huygens' principle. In any event, mathematically it is fully equivalent to the classical Somigliana's representation theorem. In order to gauge accuracy we test our method by comparing with an analytical solution known as Discrete Wave Number. A near interface pulse generates scattered waves that can be registered by receivers located in the fluid and it is possible to infer wave velocities of solids. Results are presented in both time and frequency domain, where several aspects related to the different wave types that emerge from this kind of problems are pointed out.     

Testing potential bias in marine plankton respiration rates by dark bottle incubations in the NW Iberian shelf: incubation time and bottle volume

The accurate determination of the balance between plankton production and respiration in the ocean is important for C budgets and global change predictions. Disagreements on the measurement of such a balance at different scales (from microbiological to biogeochemical) have produced a controversy over the trophic status of the ocean. This is especially striking in the oligotrophic open ocean, where plankton community O₂ consumption rates in 24 h incubations have frequently produced a net heterotrophic balance, but similar difficulties emerge in coastal systems. These results have been criticised due to the possibility that the standard 24 h in vitro incubations are biased because of the long incubation time needed and the so-called “bottle effect”.To study the influence of the incubation time and bottle volume on the measurement of plankton net metabolism, we carried out several time series experiments in the NW Iberian coastal system. Here we present measurements of plankton community respiration rates concurrently obtained through (1) standard in vitro changes in dissolved oxygen concentration after different incubation times ranging from 2 to 48 h, and with bottle volumes of 50, 125 and 570 mL, and (2) the decrease in the oxygen concentration measured every 20 s with oxygen microsensors, during 48 h. Our results refute the contention that 24 h dark 125 mL bottle incubations are systematically biased, and highlight the validity of oxygen microsensors to study the dynamics of natural marine plankton respiration.     

Least square approach to simulate wave propagation in irregular profiles using the indirect boundary element method

In earthquake engineering and seismology it is of interest to know the surface motion at a given site due to the incoming and scattered seismic waves by surface geology. This can be formulated in terms of diffraction of elastic waves and then the indirect boundary element method (IBEM) for dynamic elasticity is used. It is based on the explicit construction of diffracted waves at the boundaries from which they radiate. This provides the analyst with insight on the physics of diffraction. The IBEM has been applied to study the amplification of elastic waves in irregular soil profiles. From the strong or weak satisfaction of boundary conditions and a simple analytical discretization scheme a linear system of equations for the boundary sources is obtained. Here, we explore the use of a weak discretization strategy with more collocation points than force densities. The least squares enforcement of boundary conditions leads to a system with reduced number of unknowns. This approach naturally allows one to use both coarser and finer boundary discretizations for smooth and rapidly varying profiles, respectively. A well studied semicircular canyon under incident P or SV in-plane waves is used to calibrate this method. Several benefits are obtained using mixed meshing that leads to the least squares condensation of the IBEM.     

Density and magnetic models of the lithosphere along CELEBRATION 2000 profile CEL01

The paper presents 2D density and magnetic models of the crust and upper mantle along the DSS line profile of the CELEBRATION 2000 project that crosses the most important geological units in Central Europe. These are the Alps-Carpathians-Pannonian (ALCAPA) region, the SE part of the Paleozoic Platform (PLZ), the Trans-European Suture Zone (TESZ) and a fragment of the SW portion of the East European Craton (EEC). The density and magnetic models were constructed on the basis of a 2D model of P-wave velocity converted into density model, geological data as well as geothermal data and the results of integrated geophysical modelling for the lithosphere-asthenosphere boundary.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.     

A channel head stability criterion for first‐order catchments

The present analysis derives a stability criterion for long‐term equilibrium channel heads. The concept of finite perturbation analysis is presented, during which the surface is subjected to perturbations of a finite amplitude and resulting changes in flow path structure and slope are computed. Based on these quantities the analysis predicts whether the perturbed location is going to erode, be filled in or remain steady. The channel head is defined geometrically as the focus point of converging flow lines at the bottom of hollows. It is demonstrated that stability at the channel head grows out of the competition between the rate of flow path convergence and the degree of profile concavity. Analytical functions are derived to compute channel head‐contributing area and ‐slope, flow path convergence and profile concavity as a function of perturbation depth, distance from the crest and the initial slope. In a numerical model these quantities point to the long‐term equilibrium channel head position, which is shown to depend also on the width to length ratio of hollows. It is also demonstrated that the equilibrium channel head position is sensitive to the base‐level lowering/non‐dimensional slope length ratio and to the slope of the initial topography. Morphometrical measurements both in the field and on simulated topographies were used to test the theoretical predictions.     

The role of aridification in constraining the elevation range of Holocene solifluction processes and associated landforms in the periglacial belt of the Sierra Nevada (southern Spain)

Climate variability during the Mid‐Late Holocene has influenced the activity of geomorphic processes in the current periglacial belt of the Sierra Nevada. We studied two types of sedimentary records that reveal a synchronous timing for slope instability in this high semi‐arid massif: solifluction landforms and mountain lake sediments. Lithological and sedimentological properties of both records have recorded numerous cycles of different magnitude of slope processes in the massif. Solifluction deposits record seven phases of solifluction activity and soil development during the last 7 ka bp and lake sediments show evidence of eight periods with increased geomorphic activity in the catchments over the last 6 ka bp . Although present‐day climate conditions do not promote active solifluction processes in the Sierra Nevada, colder and wetter periods during the Holocene triggered solifluction and transported coarse‐grained sediments into the lakes. By contrast, warm phases favoured soil formation and spread an incipient vegetation cover over the headwaters of the highest valleys, diminishing the grain size of the particles reaching the lakes. Lake sediments record an aridification trend in the massif intensifying since 4·2 ka bp that has conditioned solifluction activity to shift gradually to higher elevations. During major cooler phases such as the Little Ice Age active solifluction was recorded back down to 2500 m altitude. Copyright © 2010 John Wiley & Sons, Ltd.