Goethite surface reactivity: III. Unifying arsenate adsorption behavior through a variable crystal face - Site density model

We developed a model that describes quantitatively the arsenate adsorption behavior for any goethite preparation as a function of pH and ionic strength, by using one basic surface arsenate stoichiometry, with two affinity constants. The model combines a face distribution-crystallographic site density model for goethite with tenets of the Triple Layer and CD-MUSIC surface complexation models, and is self-consistent with its adsorption behavior towards protons, electrolytes, and other ions investigated previously. Five different systems of published arsenate adsorption data were used to calibrate the model spanning a wide range of chemical conditions, which included adsorption isotherms at different pH values, and adsorption pH-edges at different As(V) loadings, both at different ionic strengths and background electrolytes. Four additional goethite-arsenate systems reported with limited characterization and adsorption data were accurately described by the model developed. The adsorption reaction proposed is:

     

Structure, thermodynamics, and diffusion in CaAl2Si2O8 liquid from first-principles molecular dynamics

We have performed first-principles molecular dynamics simulations of CaAl₂Si₂O₈ (anorthite) liquid at pressures up to 120 GPa and temperatures of 3000, 4000 and 6000 K. At the lowest degrees of compression the liquid is seen to accommodate changes in density through decreasing the abundance of 3- and 4-membered rings, while increases in coordination of network forming cations take effect at somewhat higher degrees of compression. Results are fit to a fundamental thermodynamic relation with 4th order finite strain and 1st order thermal variable expansions. Upon compression by a factor of two, the Grüneisen parameter (γ) is found to increase continuously from 0.35 to 1.10. Weak temperature dependence in γ is thermodynamically consistent with a slight decrease in isochoric heat capacity (C_V), for which values of between 4.4 and 5.2 Nk_B are obtained, depending on the temperature. Pressure and temperature dependence of self-diffusivities is found to be well represented by an Arrhenius relation, except at 3000 K and pressures lower than 5 GPa, where self-diffusivities of Si, Al, and O increase with pressure. Analysis of the lifetimes of individual coordination species reveals that this phenomenon arises due to the disproportionately high stability of 4-fold coordinated Si, and to a lesser extent 4-fold coordinated Al. Our results represent a marked improvement in accuracy and reliability in describing the physics of CaAl₂Si₂O₈ liquid at deep mantle pressures, pointing the way to a general thermodynamic model of melts at extreme pressures and temperatures relevant to planetary-scale magma oceans and deep mantle partial melting.     

Beryllium-10 in Australasian tektites: Constraints on the location of the source crater

By using accelerator mass spectrometry we have measured the ¹⁰Be concentrations of 86 Australasian tektites. Corrected to the time of tektite production ∼0.8 My ago, the ¹⁰Be concentrations (10⁶ atom/g) range from 59 for a layered tektite from Huai Sai, Thailand, to 280 for an australite from New South Wales, Australia. The average value is 143 ± 50. When tektites are sorted by country, their average measured ¹⁰Be concentrations increase slowly with increasing distance from Southeast Asia, the probable location of the tektite producing event, from 59 ± 9 for 6 layered tektites from Laos to 136 ± 20 for 20 splash-form tektites from Australia. The lowest ¹⁰Be concentrations for tektites fall on or within a contour centered off the shore of Vietnam, south of the Gulf of Tonkin (107°E; 17°N), but also encompassing two other locations in the area of northeastern Thailand previously proposed for the site of a single tektite-producing impact. The ¹⁰Be concentrations of layered tektites show only a weak anticorrelation (R ∼ −0.3) with the numbers of relict crystalline inclusions.Loosely consolidated, fine-grained terrestrial sediments or recently consolidated sedimentary rocks are the most likely precursor materials. Dilution of sediments with other kinds of rock raises problems in mixing and is not supported by petrographic data. Sedimentary columns that have the right range of ¹⁰Be concentrations occur off the coasts of places where sedimentation rates are high relative to those in the deep sea. A single impact into such a region, 15 to 300 m thick, could have propelled near-surface, high-¹⁰Be material farthest—to Australia—while keeping the deeper-lying, low-¹⁰Be layers closer to home. We do not rule out, however, other proposed mechanisms for tektite formation.     

Melt extraction pathways and stagnation depths beneath the Madeira and Desertas rift zones (NE Atlantic) inferred from barometric studies

The Madeira and Desertas Islands (eastern North Atlantic) show well-developed rift zones which intersect near the eastern tip of Madeira (São Lourenço peninsula). We applied fluid inclusion barometry and clinopyroxene-melt thermobarometry to reconstruct levels of magma stagnation beneath the two adjacent rifts and to examine a possible genetic relationship during their evolution. Densities of CO₂-dominated fluid inclusions in basanitic to basaltic samples from São Lourenço yielded frequency maxima at pressures of 0.57–0.87 GPa (23–29 km depth) and 0.25–0.32 GPa (8–10 km), whereas basanites, basalts and xenoliths from the Desertas indicate 0.3–0.72 GPa (10–24 km) and 0.07–0.12 GPa (2–3 km). Clinopyroxene-melt thermobarometry applied to Ti-augite phenocryst rim and glass/groundmass compositions indicates pressures of 0.45–1.06 GPa (15–35 km; São Lourenço) and 0.53–0.89 GPa (17–28 km; Desertas Islands) which partly overlap with pressures indicated by fluid inclusions. We interpret our data to suggest a multi-stage magma ascent beneath the Madeira Archipelago: main fractionation occurs at multiple levels within the mantle (>15 km depth) and is followed by temporary stagnation within the crust prior to eruption. Depths of crustal magma stagnation beneath São Lourenço and the Desertas differ significantly, and there is no evidence for a common shallow magma reservoir feeding both rift arms. We discuss two models to explain the relations between the two adjacent rift systems: Madeira and the Desertas may represent either a two-armed rift system or two volcanic centres with separate magma supply systems. For petrological and volcanological reasons, we favour the second model and suggest that Madeira and the Desertas root in distinct regions of melt extraction. Magma focusing into the Desertas system off the hotspot axis may result from lithospheric bending caused by the load of the Madeira and Porto Santo shields, combined with regional variations in melt production due to an irregularly shaped plume.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: J. Hoefs     

Recent landslide activity in Manaihan,East Belgium

Past landslides have been recognized in the Battice area in E-Belgium. In contrast to the other inactive landslides, the Manaihan landslide responded immediately to heavy rainfall events in the last two decades. This study aims to map its spatial extent and the dominant surface features; to measure surface displacement using GPS; to investigate subsurface structure with Cone penetration test (CPT) and corings; and to determine the depth of the shear surface by inclinometers. Results show a partial landslide reactivation. Surface velocities range between 20 and 40 cm/year and are strongly dependent on winter rainfall. CPT results give clear boundaries between the landslide mass and the undisturbed bedrock in the head scarp. Distinct shear surfaces have been determined with displacement rates up to 15.8 mm in 21 days. Further research should apply geophysical methods for two-dimensional information on the ground, investigate geotechnical properties of the landslide mass, model slope instability, and determine the influence of a sewage pipe crossing the central landslide mass as a potential cause for landslide activity.     

Carbon isotope stratigraphy of Lochkovian to Eifelian limestones from the Devonian of central and southern Europe

Lower to Middle Devonian carbonates of the Prague Syncline, the Carnic Alps, the Montagne Noire, and the Cantabrian Mountains were investigated for δ¹³C_carb and δ¹³C_org. These values were measured on bulk rocks, selected components and cements. Many carbonates exhibit primary marine values, but some are altered by diagenesis. A δ¹³C curve can be presented for the latest Pridolian to Emsian time interval. Several sharp or broad positive excursions are obvious in the woschmidti-postwoschmidti, sulcatus, kitabicus, Late serotinus, and kockelianus conodont zones. The excursion at the Silurian–Devonian boundary is known worldwide and therefore considered global in nature. Some of the others are described for the first time from central and southern Europe, and their global nature has to be verified by further investigations in other regions. Most excursions relate to and/or started during major regressions whereas sea-level highstands correspond to minimal δ¹³C values. Similar relationships between sea-level changes and δ¹³C have been observed from other early Palaeozoic intervals. The transgressive Chote? (?) and Ka?ák events are marked by positive isotope excursions, this type of combination is usually observed in late Palaeozoic to Cenozoic black shale events.     

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.     

Alternative water management options to reduce vulnerability for climate change in the Netherlands

Urbanization, land subsidence and sea level rise will increase vulnerability of the urbanized low-lying areas in the western part of the Netherlands. In this article possibilities are explored to reduce vulnerability of these areas by implementing alternative water management options. Two main water management fields are distinguished, water supply and flood control. A four-component vulnerability framework is presented that includes threshold capacity, coping capacity, recovery capacity, and adaptive capacity. By using the vulnerability framework it is shown that current water supply and flood control strategies in the Netherlands focus on increasing threshold capacity by constructing higher and stronger dikes, improved water storage and delivery infrastructure. A complete vulnerability decreasing strategy requires measures that include all four capacities. Flood damage reduction, backup water supply systems and emergency plans are measures that can contribute to increasing coping capacity. Recovery capacity can be increased by multi-source water supply, insurance, or establishing disaster funds. Adaptive capacity can be developed by starting experiments with new modes of water supply and urbanization. Including all four components of the vulnerability framework enables better understanding of water and climate related vulnerability of urban areas and enables developing more complete water management strategies to reduce vulnerability.     

Web-oriented GIS system for monitoring, conservation and law enforcement of the Brazilian Amazon

A web GIS (WGIS) system for the Brazilian Amazon, named ImazonGeo and based on open source and public domain data, is presented. ImazonGeo was built following three principles. First, the system is based on Spatial Data Infrastructure architecture and web interface built using free software and public domain data. Second, we went beyond visualization of maps and spatial queries by providing information obtained with spatial analysis models. To do that, we designed a database that stores the results of previously defined spatial analyses and developed customized reports and query tools to facilitate fast access of information by end-users. Finally, the system is application-oriented in the areas of forest monitoring, conservation and forest law enforcement, meaning that it aims to contribute to support the protection of Brazilian Amazon forests. We illustrate these principles by presenting ImazonGeo’s technology, architecture, content and tools. Moreover, we present two successful cases to demonstrate how the system is being used. We conclude the paper discussing the challenges and potential solutions to turning our WGIS-SDI system into an internet hub of geo-information about the Brazilian Amazon.