Application of Distributed Temperature Sensing for coupled mapping of sedimentation processes and spatio‐temporal variability of groundwater discharge in soft‐bedded streams

The delineation of groundwater discharge areas based on Distributed Temperature Sensing (DTS) data of the streambed can be difficult in soft‐bedded streams where sedimentation and scouring processes constantly change the position of the fibre optic cable relative to the streambed. Deposition‐induced temperature anomalies resemble the signal of groundwater discharge while scouring will cause the cable to float in the water column and measure stream water temperatures. DTS applied in a looped layout with nine fibre optic cable rows in a 70 × 5 m section of a soft‐bedded stream made it possible to detect variability in streambed temperatures between October 2011 and January 2012. Detailed monthly streambed elevation surveys were carried out to monitor the position of the fibre optic cable relative to the streambed and to quantify the effect of sedimentation processes on streambed temperatures. Based on the simultaneous interpretation of streambed temperature and elevation data, a method is proposed to delineate potential high‐groundwater discharge areas and identify deposition‐induced temperature anomalies in soft‐bedded streams. Potential high‐discharge sites were detected using as metrics the daily minimum, maximum and mean streambed temperatures as well as the daily amplitude and standard deviation of temperatures. The identified potential high‐discharge areas were mostly located near the channel banks, also showing temporal variability because of the scouring and redistribution of streambed sediments, leading to the relocation of pool‐riffle sequences. This study also shows that sediment deposits of 0.1 m thickness already resulted in an increase in daily minimum streambed temperatures and decrease in daily amplitude and standard deviation. Scouring sites showed lower daily minimum streambed temperatures and higher daily amplitude and standard deviation compared with areas without sedimentation and scouring. As a limitation of the approach, groundwater discharge occurring at depositional and scouring areas cannot be identified by the metrics applied. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved algorithms for generalized finite element simulations of three-dimensional hydraulic fracture propagation

This paper reports improvements to algorithms for the simulation of 3-D hydraulic fracturing with the Generalized Finite Element Method (GFEM). Three optimizations are presented and analyzed. First, an improved initial guess based on solving a 3-D elastic problem with the pressure from the previous step is shown to decrease the number of Newton iterations and increase robustness. Second, an improved methodology to find the time step that leads to fracture propagation is proposed and shown to decrease significantly the number of iterations. Third, reduced computational cost is observed by properly recycling the linear part of the coupled stiffness matrix. Two representative examples are used to analyze these improvements. Additionally, a methodology to include the leak-off term is presented and verified against asymptotic analytical solutions. Conservation of mass is shown to be well satisfied in all examples.     

Sensitivity of a hydraulic model to channel erosion uncertainty during extreme flooding

Recent research into flood modelling has primarily concentrated on the simulation of inundation flow without considering the influences of channel morphology. River channels are often represented by a simplified geometry that is implicitly assumed to remain unchanged during flood simulations. However, field evidence demonstrates that significant morphological changes can occur during floods to mobilize the boundary sediments. Despite this, the effect of channel morphology on model results has been largely unexplored. To address this issue, the impact of channel cross‐section geometry and channel long‐profile variability on flood dynamics is examined using an ensemble of a 1D–2D hydraulic model (LISFLOOD‐FP) of the ~1 : 2000 year recurrence interval floods in Cockermouth, UK, within an uncertainty framework. A series of simulated scenarios of channel erosional changes were constructed on the basis of a simple velocity‐based model of critical entrainment. A Monte‐Carlo simulation framework was used to quantify the effects of this channel morphology together with variations in the channel and floodplain roughness coefficients, grain size characteristics and critical shear stress on measures of flood inundation. The results showed that the bed elevation modifications generated by the simplistic equations reflected an approximation of the observed patterns of spatial erosion that enveloped observed erosion depths. The effect of uncertainty on channel long‐profile variability only affected the local flood dynamics and did not significantly affect the friction sensitivity and flood inundation mapping. The results imply that hydraulic models generally do not need to account for within event morphodynamic changes of the type and magnitude of event modelled, as these have a negligible impact that is smaller than other uncertainties, e.g. boundary conditions. Instead, morphodynamic change needs to happen over a series of events to become large enough to change the hydrodynamics of floods in supply limited gravel‐bed rivers such as the one used in this research. Copyright © 2014 John Wiley & Sons, Ltd.     

Coastal Occupations in Tierra del Fuego,Southernmost South America: A Late Holocene Hunter‐Gatherer Context at Marazzi 2

This paper focuses on the late Holocene occupation of hunter‐gatherers at the Marazzi 2 site located on the northwestern steppe of Tierra del Fuego, Chile. Our aim is to understand stratigraphy, formation processes, and pedogenesis with respect to human occupation over the last 3000 years. Based on archaeological excavations on a fluvial terrace of the Torcido River, we integrate soil micromorphology, mineralogy, geochemistry, magnetic susceptibility, and geomorphology, as well as the micro‐ and macrofrequency distributions of archaeological material. A micro‐taphonomical perspective is also applied to anthropogenic components recorded in sedimentary thin sections. We discuss various events in the interplay between soil development and human occupation through time. Marazzi 2 was witness to aggradation and pedogenesis with an episode of surface stability coincident with a phase of more intense human occupation at about 860 BC. Taphonomic analysis suggests that there are multiple occupation events mixed together, probably by biomechanical processes, resulting in a palimpsest with poor temporal resolution.     

The need for national deep decarbonization pathways for effective climate policy

Constraining global average temperatures to 2 °C above pre-industrial levels will probably require global energy system emissions to be halved by 2050 and complete decarbonization by 2100. In the nationally orientated climate policy framework codified under the Paris Agreement, each nation must decide the scale and method of their emissions reduction contribution while remaining consistent with the global carbon budget. This policy process will require engagement amongst a wide range of stakeholders who have very different visions for the physical implementation of deep decarbonization. The Deep Decarbonization Pathways Project (DDPP) has developed a methodology, building on the energy, climate and economics literature, to structure these debates based on the following principles: country-scale analysis to capture specific physical, economic and political circumstances to maximize policy relevance, a long-term perspective to harmonize short-term decisions with the long-term objective and detailed sectoral analysis with transparent representation of emissions drivers through a common accounting framework or ‘dashboard’. These principles are operationalized in the creation of deep decarbonization pathways (DDPs), which involve technically detailed, sector-by-sector maps of each country’s decarbonization transition, backcasting feasible pathways from 2050 end points. This article shows how the sixteen DDPP country teams, covering 74% of global energy system emissions, used this method to collectively restrain emissions to a level consistent with the 2 °C target while maintaining development aspirations and reflecting national circumstances, mainly through efficiency, decarbonization of energy carriers (e.g. electricity, hydrogen, biofuels and synthetic gas) and switching to these carriers. The cross-cutting analysis of country scenarios reveals important enabling conditions for the transformation, pertaining to technology research and development, investment, trade and global and national policies.

Policy relevance

In the nation-focused global climate policy framework codified in the Paris Agreement, the purpose of the DDPP and DDPs is to provide a common method by which global and national governments, business, civil society and researchers in each country can communicate, compare and debate differing concrete visions for deep decarbonization in order to underpin the necessary societal and political consensus to design and implement short-term policy packages that are consistent with long-term global decarbonization.     

Life after death: shallow‐water Mediterranean invertebrate communities associated with mammal bones

Invertebrate and microbial marine communities associated with mammal bones are interesting and poorly understood habitats, mainly known from studies on deep‐water whale remains. In order to characterize these communities in the shallow‐water Mediterranean, we present here the results of a pioneering experiment using mammal bones. Minke whale, pig and cow bones were experimentally deployed on three different background communities: rocky substrate, soft‐bottom and a Posidonia oceanica meadow. Bones were deployed for a year at about 20 m depth and collected every 3 months, and the invertebrate fauna colonizing the bones was identified to the lowest possible taxonomic level. As expected, mammal bones showed remarkable differences when compared with background communities. Within bones, four different clusters could be identified, primarily on the basis of the polychaete fauna, the most abundant and diverse group in the survey. Clusters A1–A3 corresponded to high to moderately altered successional stages composed by a fauna closer to that of anthropogenically enriched shallow‐water environments. These clusters were characterized by the occurrence of the opportunist polychaetes Ophryotrocha puerilis, Neanthes caudata (Cluster A1), Protodorvillea kefersteini (Cluster A2) and Ophryotrocha alborana (Cluster A3). Cluster B was characterized by the presence of the polychaete Oxydromus pallidus together with typical invertebrate background fauna, which suggests that this community, after a year of deployment, was closer to that found in natural conditions. As opposed to similar shallow‐water studies in other geographic areas, no occurrence of the polychaete Osedax (commonly known as bone‐eating worms) was reported from our experiments. Apart from the study on the invertebrate communities, insights about the population dynamics of three of the most abundant species (O. puerilis, O. alborana, N. caudata) are given as well as remarks on a hypothetical trophic network based on fecal pellet analysis.