SCAP meeting no.10

Mike Bode , Phil Charles and Carlos Frenk report the minutes of the tenth meeting of the Standing Conference of Astronomy Professors, held at the RAS, Burlington House on 30 January 2001.     

Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

An indurated Pleistocene coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean): evidence for a prolonged relative sea-level stillstand

The objective of this study is to document and interpret a recently discovered carbonate-cemented coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean Sea). The coastal barrier was identified in a high-resolution digital bathymetric model based on a cartographic survey of the study area using a multibeam echosounder. Moreover, radiocarbon dating and petrographic analyses were performed on a rock sample recovered from the seabed. The data reveal the submerged coastal barrier to be approx. 1.7 km wide and 70 km long, and incised by channels of various dimensions. Aligned more or less parallel to the modern coastline, it is interpreted as corresponding to the shoreline of a former sea-level stillstand. The barrier and lagoon system became stranded above sea level in the course of a subsequent forced regression, which also caused the incision of the river courses. Age dating of the cemented rock suggests that the fossil coastal barrier most probably formed during the prolonged Tyrrhenian (Eemian) sea-level highstand, induration taking place by carbonate cementation at the contact between freshwater and seawater (beach-rock formation). The fact that the fossil barrier is today submerged below modern sea level is explained by the sustained subsidence affecting the region.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

Tectonic implications of the earthquake swarm of 1997 in the Michoacan Triangle, Mexico

An earthquake swarm occurred during February and March 1997 in the vicinity of the Tancitaro Volcano, in the southern part of the tectonically complex Michoacan Triangle. A study of these events provides an opportunity to map the active faults in the area and to learn if the orientation and the sense of motion on these faults are consistent with the mapped faults and the alignment of cinder cones in the region. The foci of 230 earthquakes, which could be located, are distributed between 10 and 18 km depth, and show an alignment in, roughly, a NE direction. The focal mechanisms and seismic moments of the 27 best-recorded events were determined by waveform modeling of P and S waves. These mechanisms show two distinct patterns. More than 50% of the solutions are left-lateral strike–slip mechanisms with a normal component. The preferred fault plane strikes NE. Another group of events, probably caused by triggered seismicity on the Chapala–Oaxaca fault zone, shows left-lateral strike–slip mechanisms with a large-thrust component on NW-trending faults. S wave splitting shows 1–2.5% crustal-anisotropy. The direction of the anisotropy coincides with the NE alignment of events, and the preferred nodal plane. This is also the alignment of cinder cones, suggesting that preexisting fractures and cracks are responsible for the seismicity and anisotropic behavior of the crust. The resulting stress orientation, NE compression, is the one expected for the fore-arc region. We conclude that although Michoacan Triangle lies in the Trans-Mexican Volcanic Belt, it does not form part of this stress province where the stress orientation is NS extension.     

Homogeneity of the Geochemical Reference Material BRP-1 (Paraná Basin Basalt) and Assessment of Minimum Mass

Reference materials (RM) are required for quantitative analyses and their successful use is associated with the degree of homogeneity, and the traceability and confidence limits of the values established by characterisation. During the production of a RM, the chemical characterisation can only commence after it has been demonstrated that the material has the required level of homogeneity. Here we describe the preparation of BRP-1, a proposed geochemical reference material, and the results of the tests to evaluate its degree of homogeneity between and within bottles. BRP-1 is the first of two geochemical RM being produced by Brazilian institutions in collaboration with the United States Geological Survey (USGS) and the International Association of Geoanalysts (IAG). Two test portions of twenty bottles of BRP-1 were analysed by wavelength dispersive-XRF spectrometry and major, minor and eighteen trace elements were determined. The results show that for most of the investigated elements, the units of BRP-1 were homogeneous at conditions approximately three times more rigorous than those strived for by the test of "sufficient homogeneity". Furthermore, the within bottle homogeneity of BRP-1 was evaluated using small beam (1 mm²) synchrotron radiation XRF spectrometry and, for comparison, the USGS reference materials BCR-2 and GSP-2 were also evaluated. From our data, it has been possible to assign representative minimum masses for some major constituents (1 mg) and for some trace elements (1-13 mg), except Zr in GSP-2, for which test portions of 74 mg are recommended.     

Numerical relationships between magnetic parameters measured in Quaternary sediments and global paleoclimatic proxies

The complexity of most geological and geophysical problems prompts sometimes the use of non linear mathematical methods to handle them. An adaptive neuro fuzzy inference system (ANFIS) that combines fuzzy logic with neural networks, is applied here to study a paleoclimate section from the Quaternary sedimentary fill of the Lake Mucubají (western Venezuela). The purpose of this work is to find a set of numerical relationships that could predict the possible connections between oxygen isotope (δ¹⁸O) values from two different locations in the northern hemisphere (Ammersee in southern Germany and an ice core from the Greenland Ice Core Project — GRIP) and rock-magnetic parameters measured in Mucubají samples (i.e. mass-specific magnetic susceptibility — χ, magnetic remanence S-ratio, mass-specific saturation isothermal remanent magnetization — SIRM and anhysteretic remanent magnetization — ARM). The best inferences in terms of coefficient of determionation R² and the Root Mean-Square Error (RMSE) are obtained using those magnetic data as input that include information about magnetite grain size distributions, e.g., SIRM and ARM in FIS structures [1χ, 4ARM] and [4ARM, 1SIRM]. A comparison between Ammersee and GRIP actual data, as well as their corresponding inferences for the FIS structure [4ARM, 1SIRM], reveals a reasonable good inference of global trends for both records, overlooking the regional and/or local paleoclimate forcings that might have affected Ammersee. A better correlation between global isotope paleoclimate records and magnetic proxies, is perhaps prevented by the role played by local and regional paleoclimate and tectonism in Mucubají. We also argue that the ratio of ARM over SIRM appears to be related in a complex way to the onset and to the end of the Younger Dryas. Our novel approach to the assessment of a specific paleoclimate case study shows the potential of the ANFIS technique in solving problems where traditional univariate and multivariate linear regression methods could prove inadequate.     

Pliocene and late Pleistocene (MIS 5e) decapod crustaceans from Santa Maria Island (Azores Archipelago: Central Atlantic): systematics,palaeoecology and palaeobiogeography

The presence of decapod crustaceans in the Pliocene and Pleistocene (MIS 5e) fossil record of Santa Maria Island (Azores Archipelago) is herein reviewed. Our study raises the number of fossil decapods from this island from one species to 10 taxa (three for the Pliocene and seven for the Last Interglacial). Four of these 10 taxa are reported for the first time in the fossil record, worldwide. A new species of a mud shrimp is also described (Upogebia azorensis n. sp.). Our study suggests that the Plio–Pleistocene decapod assemblages of the Azores did not differ significantly from modern ones, being dominated by species that are today widespread across the Webbnesia ecoregion, the Mediterranean Sea, and the eastern Atlantic shores, including the Azores. As far as can be judged from the limited fossil record, apparently no tropical crab species with a Cabo Verdean/Senegalese provenance reached the Azores during windows of opportunity associated with Glacial Termination 2 or with the initial setting of the Last Interglacial period. This contribution increases the total number of marine taxa reported for the Pliocene and Pleistocene outcrops of Santa Maria Island to 218 and 155, respectively, highlighting the scientific relevance of its palaeontological heritage.     

Statistical analyses of Global U-Pb Database 2017

The method of obtaining zircon samples affects estimation of the global U-Pb age distribution.Researchers typically collect zircons via convenience sampling and cluster sampling.When using these techniques,weight adjustments proportional to the areas of the sampled regions improve upon unweighted estimates.Here,grid-area and modern sediment methods are used to weight the samples from a new database of 418,967 U-Pb ages.Preliminary tests involve two age models.Model-1 uses the most precise U-Pb ages as the best ages.Model-2 uses the~(206)Pb/~(238)U age as the best age if it is less than a1000 Ma cutoff,otherwise it uses the~(207)Pb/~(206)Pb age as the best age.A correlation analysis between the Model-1 and Model-2 ages indicates nearly identical distributions for both models.However,after applying acceptance criteria to include only the most precise analyses with minimal discordance,a histogram of the rejected samples shows excessive rejection of the Model-2 analyses around the1000 Ma cutoff point.Because of the excessive rejection rate for Model-2,we select Model-1 as the preferred model.After eliminating all rejected samples,the remaining analyses use only Model-1 ages for five rock-type subsets of the database:igneous,meta-igneous,sedimentary,meta-sedimentary,and modern sediments.Next,time-series plots,cross-correlation analyses,and spectral analyses determine the degree of alignment among the time-series and their periodicity.For all rock types,the U-Pb age distributions are similar for ages older than 500 Ma,but align poorly for ages younger than 500 Ma.The similarities(500 Ma)and differences(500 Ma)highlight how reductionism from a detailed database enhances understanding of time-dependent sequences,such as erosion,detrital transport mechanisms,lithification,and metamorphism.Time-series analyses and spectral analyses of the age distributions predominantly indicate a synchronous period-tripling sequence of~91-Myr,~273-Myr,and~819-Myr among the various rock types.