Development of airborne oil thickness measurements

A laboratory sensor has now been developed to measure the absolute thickness of oil on water slicks. This prototype oil slick thickness measurement system is known as the laser-ultrasonic remote sensing of oil thickness (LURSOT) sensor. This laser opto-acoustic sensor is the initial step in the ultimate goal of providing an airborne sensor with the ability to remotely measure oil-on-water slick thickness. The LURSOT sensor employs three lasers to produce and measure the time-of-flight of ultrasonic waves in oil and hence provide a direct measurement of oil slick thickness. The successful application of this technology to the measurement of oil slick thickness will benefit the scientific community as a whole by providing information about the dynamics of oil slick spreading and the spill responder by providing a measurement of the effectiveness of spill countermeasures such as dispersant application and in situ burning.

This paper will provide a review of early developments and discuss the current state-of-the-art in the field of oil slick thickness measurement.     

Lightcurve Analysis of Four New Monolithic Fast-Rotating Asteroids

We present lightcurves and analysis for four new monolithic fast-rotating asteroids: 2000 AG₆, 2000 DO₈, 2000 EB₁₄, and 2000 HB₂₄. Their rotation periods of 4.60, 1.30, 107.47, and 13.05 min place them well below the critical threshold for the rotation rate of strengthless prolate ellipsoids, as we demonstrate. These four objects join the five previously identified fast-rotating asteroids. The sharp segregation in spin rates between these nine objects and asteroids with more typical spin rates is somewhat puzzling. No observed objects larger than about 200 m spin with rates faster than the critical rate for strengthless prolate ellipsoids, while no objects smaller than 200 m have shown spin rates slower than this critical limit. We hypothesize that these small, fast-rotating objects are representative of the building blocks of the “rubble pile” asteroids and are in fact derived from impacts into already existing “rubble piles.”     

Precipitate flotation of copper as the sulfide,using recyclable amphoteric surfactants

An experimental study was made to identify surfactants which are effective for removal of copper from dilute aqueous solution (100–500 ppm) by precipitate flotation as the sulfide, and which at the same time can be recovered from the CuS product for recycle. Batch flotation experiments confirmed that a cationic surfactant was necessary for flotation of CuS from such dilute suspensions; however, no satisfactory way could be found for recovering cationic surfactants from the CuS. This led to consideration of amphoteric surfactants, which are cationic at low pH and anionic at high pH. It was found that a change to negative, rather than simply neutral, charge was required for efficient surfactant recovery. It was further found, through the assistance of experiments in which the CuS suspension was agitated with solvents, that certain functional groups which interact chemically with the CuS surface should also be absent from the surfactant molecule. Following this logic, Amphoterge K-2 (Lonza Chemical Co.) was identified as a suitable surfactant, provided CuS was precipitated with S^2? in excess. Tests established that 95% of adsorbed Amphoterge K-2 could be recovered by raising the pH to 11 and boiling the suspension for one hour, followed by decanting. Surfactant thus recovered was effective in a second flotation test. Foamate solids settled rapidly; such behavior would help reduce the consumption of chemicals for the pH change.Column flotation studies were made using Amphoterge K-2 for removal of Cu²⁺ present at 100 ppm and pH = 2. High removals of CuS could be obtained at concentrations of surfactant above about 25 ppm, for which conditions a substantial fraction of the surfactant remains in solution rather than being adsorbed onto the CuS. The recovery of CuS would be improved by introducing the surfactant in a separate feed, below the feed of CuS suspension. Adding some surfactant in the CuS feed, as well as in a lower feed, gave an even better recovery of CuS (99.8%) at sufficiently high surfactant loadings.     

The lunar rock and mineral characterization consortium: Deconstruction and integrated mineralogical,petrologic, and spectroscopic analyses of mare basalts

The lunar rock and mineral characterization consortium (LRMCC) has conducted coordinated mineralogy/petrography/spectroscopy analyses of a suite of pristine lunar basalts. Four basalt slabs (two low‐Ti, two high‐Ti) and paired thin sections were analyzed. Thin sections were analyzed for mineralogy/petrography, while the slabs were used to prepare particulate separates of major mineral phases and bulk samples. Mineral separates and particulate bulk samples were crushed to controlled grain sizes and their reflectance spectra measured in the NASA RELAB at Brown University. The resulting data set provides an essential foundation for spectral mixing models, offers valuable endmember constraints for space weathering analyses, and represents critical new ground truth results for lunar science and exploration efforts.     

Evidence for surface variegation in Rosetta OSIRIS images of asteroid 2867 Šteins

The OSIRIS camera onboard Rosetta successfully acquired images of asteroid 2867 Steins through a variety of color filters during the flyby on 5 September 2008. The best images of this 5 km diameter asteroid have a resolution of 78 m per pixel. We process the images by deconvolving with the point spread function and enlarging through the Mitchell-Netravali filter. The enhanced set is analyzed by means of various techniques (PCA, band ratios, stereo anaglyphs) to study surface morphology and search for variegation. We identify a landslide, which supports a YORP origin for Steins’ unusual diamond shape. In addition, we find that the interior of one of two large craters on the south pole is bluer than the rest of the body.     

Near‐infrared spectra of clinopyroxenes: Effects of calcium content and crystal structure

Abstract– Pyroxenes are among the most common minerals in the solar system and are ideally suited for remote geochemical analysis because of the sensitivity of their distinctive spectra to mineral composition. Fe²⁺ is responsible for the dominant pyroxene absorptions in the visible and near‐infrared, but substitutions of other cations such as Ca²⁺ change the crystal structure and site geometries and thus the crystal field splitting energies of the Fe cations. To define spectral systematics resulting from major pyroxene cations (Ca²⁺, Mg²⁺, and Fe²⁺), we focus on a suite of pyroxenes synthesized with only Ca²⁺, Mg²⁺, and Fe²⁺ in the two octahedral sites, specifically examining the effect of Ca²⁺ on pyroxene absorption bands. The modified Gaussian model is used to deconvolve pyroxene spectra into component bands that can then be linked directly to crystal field absorptions. In orthopyroxenes and low‐Ca clinopyroxenes, Ca²⁺‐content has a strong and predictable effect on the positions of the absorption bands. At a threshold of Wo₃₀, the crystal field environment stagnates and the M2 bands cease to change significantly as more Ca²⁺ is added. At Wo₅₀, when most of the M2 sites are filled by Ca²⁺, band positions do not change drastically, although the presence and strengths of the 1 and 2 μm bands are affected by even trace amounts of Fe²⁺ in the M2 site. It is thus apparent that next‐nearest neighbors and the distortions they impose on the pyroxene lattice affect the electronic states around the Fe²⁺ cations and control absorption band properties.     

Morphological response of tidal marshes,flats and channels of the Outer Yangtze River mouth to a major storm

Systematic morphological changes of the coastline of the outer Yangtze River mouth in response to storms versus calm weather were documented by daily surveys of tidal marshes and flats between April 1999 and May 2001 and by boat surveys offshore during this and earlier periods. The largest single event during 1999 to 2001 was Typhoon Paibaian, which eroded the unvegetated tidal flat and lower marsh and led to accretion on the middle-to-upper marsh and in the subtidal channel. The greatest erosion of 21 cm occurred at the border between the marsh and the unvegetated flat due to the landward retreat of the marsh edge during the storm. Strong waves on the flats increased suspended sediment concentration by 10–20 times. On the upper marsh, where the frequency of submergence by astronomical tides is only 3%, Typhoon Paibian led to 4 cm of accretion, accounting for 57% of the net accretion observed over the 2-yr study. Typhoon Paibian led to 4 cm of accretion, accounting for 57% of the net accretion observed over the 2-yr study. Typhoon Paibian and other large storms in the 1990s caused over 50 cm of accretion along the deep axis of the river mouth outlet channel. During calm weather, when hydrodynamic energy was dominated by tides, deposition was centered on the unvegetated flats and lower, marsh with little deposition on the high marsh and erosion in the subtidal channel. Depositional recovery of the tidal flat from typhoon-induced erosion took only several days, whereas recovery of the subtidal channel by erosion took several weeks. A conceptual model for the morphological responses of tidal marshes, flats, and subtidal channels to storms and calm weather is proposed such that sediment continually moves from regions of highest near-bed energy towards areas of lower energy.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.