渤海的环流、潮余流及其对沉积物分布的影响

阐明渤海环流和潮余流的分布特征及其与沉积物输运之间的关系。本文根据80年代以来的实测海流资料得到：辽东湾的环流是顺时针向的；黄河三角洲外海存在着一支流向东北偏北向流，与辽东湾西部的东北向海流相接；渤海湾内的环流北部为反时针向，南部为顺时针向回转的双环结构。上述环流趋势与渤海沉积物分布相一致。渤海沿岸主要入海河流的特征矿物分布正是上述环流存在的最好佐证。文中进一步讨论了潮余流分布特征及其对渤海环流的贡献。     

渤海的环流、潮余流及其对沉积物分布的影响

阐明渤海环流和潮余流的分布特征及其与沉积物输运之间的关系。本文根据８０年代以来的实测海流资料得到：辽东湾的环流是顺时针向的；黄河三角洲外海存在着一支流向东北偏北向流，与辽东湾西部的东北向海流相接；渤海湾内的环流北部为反时针向，南部为顺时针向回转的双环结构。上述环流趋势与渤海沉积物分布相一致。渤海沿岸主要入海河流的特征矿物分布正在上述环流存在的最好佐证。文中进一步讨论了潮余流分布特征及其对渤海环流的     

渤海中、南部表层沉积硅藻的定量分析

对取自渤海中、南部海底表层的44个沉积物样品进行了硅藻分析。样品中共含硅藻20属41种,主要是潮间带、沿岸性底栖或浮游种类,其中尤以具槽直链藻Melosira sulc-ata和小环藻Cyclotella最多见。对本区的表层沉积硅藻用多元统计方法进行分区,共划分出三区、两亚区,井与其他海区进行了比较。     

基于遗传算法的浮式防波结构物形状最优化设计

采用遗传算法作为优化手段,以透射系数为目标函数,对给定横剖面面积的浮式防波结构物在规则波中的消波性能及剖面形状进行了最优化计算研究,探讨了透射系数最小的剖面形状与波浪周期之间的关系,为浮式防波结构物的设计提供了一定的理论依据     

海岸河口潮流数值模拟的研究与进展

对海岸河口地区潮流场的数值模拟方法进行了较为系统的归纳总结和评述,对潮流数值模拟的发展趋势进行了分析.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

山东昌邑国家级海洋生态特别保护区生态环境现状及管护对策研究

山东昌邑国家级海洋生态特别保护区是目前国内唯一以柽柳林生态系统为主要管理和保护对象的国家级海洋保护区。为系统、全面地了解保护区内生态环境和保护物种的变化趋势,文章对山东昌邑国家级海洋生态特别保护区生态环境现状进行了监测与评价,并根据评价结果,分析了保护区保护与管理中存在的问题。研究表明,该保护区生态环境一直处于亚健康状态,为促进保护及管护,提出了加强保护区生态建设,改变保护区开发利用模式;加强能力建设,实现保护区动态监控;协调发展与保护的关系,实现资源可持续利用;大力开展柽柳生态修复,恢复柽柳的资源状况的对策建议。     

超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析,矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物,且经历了较深程度的氧化蚀变,大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中;这些硫化物相以白铁矿为主,其次是等轴古巴矿和少量铜蓝,缺乏黄铁矿、闪锌矿。据推断,该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应,地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%）,Cu含量次之（0.16%~7.24%）,而Zn含量普遍较低（0.01%~0.11%）;微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似,明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。     

PHoToNs–A parallel heterogeneous and threads oriented code for cosmological N-body simulation

We introduce a new code for cosmological simulations, PHo To Ns, which incorporates features for performing massive cosmological simulations on heterogeneous high performance computer(HPC) systems and threads oriented programming. PHo To Ns adopts a hybrid scheme to compute gravitational force, with the conventional Particle-Mesh(PM) algorithm to compute the long-range force,the Tree algorithm to compute the short range force and the direct summation Particle-Particle(PP) algorithm to compute gravity from very close particles. A self-similar space filling a Peano-Hilbert curve is used to decompose the computing domain. Threads programming is advantageously used to more flexibly manage the domain communication, PM calculation and synchronization, as well as Dual Tree Traversal on the CPU+MIC platform. PHo To Ns scales well and efficiency of the PP kernel achieves68.6% of peak performance on MIC and 74.4% on CPU platforms. We also test the accuracy of the code against the much used Gadget-2 in the community and found excellent agreement.     

LAMOST CCD camera-control system based on RTS2

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST) is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device(CCD) cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version(RTS2) is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system.