Variable stars in the field of open cluster NGC 6819

We report on the discovery of 25 variable stars plus 13 suspected variables found in the field of the open cluster NGC 6819. The stars were identified from time-series photometric data obtained on the Isaac Newton Telescope, La Palma, during two observing runs covering the 19 nights between 1999 June  22–30  and 1999 July  22–31  . The variables found include 12 eclipsing binaries with an additional three suspected, nine BY Draconis systems, plus four variables of other types, including one star believed to be a Cepheid. Three of the 15 eclipsing binaries are believed to be cluster members. Details of a further 10 suspected variable stars are also included.     

Petrophysics and mineral exploration: a workflow for data analysis and a new interpretation framework

As mineral exploration seeks deeper targets, there will be a greater reliance on geophysical data and a better understanding of the geological meaning of the responses will be required, and this must be achieved with less geological control from drilling. Also, exploring based on the mineral system concept requires particular understanding of geophysical responses associated with altered rocks. Where petrophysical datasets of adequate sample size and measurement quality are available, physical properties show complex variations, reflecting the combined effects of various geological processes. Large datasets, analysed as populations, are required to understand the variations. We recommend the display of petrophysical data as frequency histograms because the nature of the data distribution is easily seen with this form of display. A petrophysical dataset commonly contains a combination of overlapping sub-populations, influenced by different geological factors. To understand the geological controls on physical properties in hard rock environments, it is necessary to analyse the petrophysical data not only in terms of the properties of different rock types. It is also necessary to consider the effects of processes such as alteration, weathering, metamorphism and strain, and variables such as porosity and stratigraphy. To address this complexity requires that much more supporting geological information be acquired than in current practice. The widespread availability of field portable instruments means quantitative geochemical and mineralogical data can now be readily acquired, making it unnecessary to rely primarily on categorical rock classification schemes. The petrophysical data can be combined with geochemical, petrological and mineralogical data to derive explanations for observed physical property variations based not only on rigorous rock classification methods, but also in combination with quantitative estimates of alteration and weathering. To understand how geological processes will affect different physical properties, it is useful to define three end-member forms of behaviour. Bulk behaviour depends on the physical properties of the dominant mineral components. Density and, to a lesser extent, seismic velocity show such behaviour. Grain and texture behaviour occur when minor components of the rock are the dominate controls on its physical properties. Grain size and shape control grain properties, and for texture properties the relative positions of these grains are also important. Magnetic and electrical properties behave in this fashion. Thinking in terms of how geological processes change the key characteristics of the major and minor mineralogical components allows the resulting changes in physical properties to be understood and anticipated.     

WASP-1b and WASP-2b: two new transiting exoplanets detected with SuperWASP and SOPHIE

We have detected low-amplitude radial-velocity variations in two stars, USNO-B1.0 1219–0005465 (GSC  02265–00107 = WASP–1  ) and USNO-B1.0 0964–0543604 (GSC  00522–01199 = WASP–2  ). Both stars were identified as being likely host stars of transiting exoplanets in the 2004 SuperWASP wide-field transit survey. Using the newly commissioned radial-velocity spectrograph SOPHIE at the Observatoire de Haute-Provence, we found that both objects exhibit reflex orbital radial-velocity variations with amplitudes characteristic of planetary-mass companions and in-phase with the photometric orbits. Line-bisector studies rule out faint blended binaries as the cause of either the radial-velocity variations or the transits. We perform preliminary spectral analyses of the host stars, which together with their radial-velocity variations and fits to the transit light curves yield estimates of the planetary masses and radii. WASP-1b and WASP-2b have orbital periods of 2.52 and 2.15 d, respectively. Given mass estimates for their F7V and K1V primaries, we derive planet masses 0.80–0.98 and 0.81–0.95 times that of Jupiter, respectively. WASP-1b appears to have an inflated radius of at least 1.33 R _Jup, whereas WASP-2b has a radius in the range 0.65–1.26 R _Jup.     

Application of the Ti-in-quartz thermobarometer to rutile-free systems. Reply to: a comment on: ‘TitaniQ under pressure: the effect of pressure and temperature on the solubility of Ti in quartz’ by Thomas et al.

The premise of the Wilson et al. comment is that the Ti-in-quartz solubility calibration (Thomas et al. in Contrib Mineral Petrol 160:743–759, 2010) is fundamentally flawed. They reach this conclusion because P–T estimates using the Ti-in-quartz calibration differ from their previous interpretations for crystallization conditions of the Bishop and Oruanui rhyolites. If correct, this assertion has far-reaching implications, so a careful assessment of the Wilson et al. reasoning is warranted. Application of the Ti-in-quartz calibration as a thermobarometer in rutile-free rocks requires an estimation of TiO₂ activity in the liquid ( (liquid–rutile); referenced to rutile saturation) and an independent constraint on either P or T to obtain the crystallization temperature or pressure, respectively. The foundation of Wilson et al.’s argument is that temperature estimates obtained from Fe–Ti oxide thermometry accurately reflect crystallization conditions of quartz in the two rhyolites discussed. We maintain that our experimental approach is sound, the thermodynamic basis of the Ti-in-quartz calibration is fundamentally correct, and our experimental results are robust and reproducible. We suggest that the reason Wilson et al. obtain implausible pressure estimates is because estimates for T and they used as input values for the Ti-in-quartz calibration are demonstrably too high. Numerous studies show that Fe–Ti oxide temperature estimates of some rhyolites are substantially higher than those predicted by well-constrained phase equilibria. In this reply, we show that when reasonable input values for T and (liquid–rutile) are used, pressure estimates obtained from the Ti-in-quartz calibration are well aligned with phase equilibria and essentially identical to melt inclusion volatile saturation pressures.     

NOAA WP-3D instrumentation and flight operations on AGASP-II

The second Arctic Gas and Aerosol Sampling Program (AGASP-II) was conducted across the non-Soviet Arctic in March and April 1986, to study the aerosol, gaseous, chemical, and optical properties of Arctic haze. One component of the program was supported with an instrumented NOAA WP-3D atmospheric research aircraft. Measurements of wind, temperature, ozone, water vapor, condensation nucleus concentration, and aerosol scattering extinction coefficient were used to determine the locations and properties of haze layers. The first three NOAA WP-3D research flights were conducted north of Barrow, Alaska, and over the Beaufort Sea northeast of Barter Island, Alaska. The next three sampled conditions in the high Arctic near Alert, Northwest Territories, Canada. All basic meteorological, gas, and aerosol systems are described. The WP-3D flight tracks and operations are presented.     

Formation of the prelunar accretion disk

According to the single-impact hypothesis for forming the Moon, the angular momentum needed for the present Earth-Moon system can be imparted to the proto-Earth by a collision with a body having one-tenth of the mass or more. The collision must vaporize a large amount of rock which must stay in the form of vapor after expanding in density by a factor of several, so that pressure gradients can accelerate significant amounts of the matter into orbital motion about the proto-Earth. A successful theory must put considerably more than a lunar mass into orbit, having considerably more angular momentum than is needed to assemble a lunar mass in orbit at 3 Earth radii. Such a collision has been simulated by a particular form of a particle-in-cell representation of hydrodynamics and 78 cases have been run representing variations in a variety of parameters. A significant fraction of the cases were successful in creating a satisfactory prelunar accretion disk. A fairly common characteristic of these cases was the presence of an excess velocity in the collision (above that of a parabolic orbit), implying that the projectile involved in the collision existed in an Earth-crossing orbit of significant ellipticity. A majority of the mass of the prelunar accretion disk is contributed by the projectile.     

Winners, losers and curate's eggs: Urban and regional outcomes of Australian economic restructuring 1971–1991

Since the early 1970s the Australian economy has undergone major transformations common to other western industrialised countries. Jobs in manufacturing declined precipitately whilst the service economy grew, most significantly in producer services but also in lower skilled jobs. Tourism and services exports began to rival traditional agricultural and mining staples. Social outcomes, also typical of international trends, included rising unemployment and polarisation of incomes. Australia's changing global context, especially the nation's increasing orientation towards Asian growth economies, have underpinned restructuring. A political climate of economic rationalism has facilitated and accentuated restructuring. The economic shifts of the past quarter century have meant that everywhere the basis for economic growth has changed. Overlaying and reinforcing the re-definition of competitive advantage has been a shift in the pattern of agglomeration economies and diseconomies. New growth regions have emerged, others have had their prospects reinforced, and still others have had their outlook diminished in absolute or, more commonly, relative terms. The paper traces the regional outcomes of national economic restructuring and shifts in the balance of agglomeration economies and diseconomies over the period from 1971 to 1991. The focus is on the top end of the urban hierarchy, on specialised industrial cities where job loss from manufacturing has hit hard, amenity regions where international and domestic tourism have been major factors in growth, and non-metropolitan balances where growth has been uneven but generally low. Demographic, economic sectoral and welfare indicators are woven into a tableau of change expressed at national, intra-state and intrametropolitan scales.     

Infrared Observations of Comet Hale–Bopp (C/1995 O1) from Gurushikhar Observatory

During the recent apparition of comet Hale—Bopp (1995 O1) near infrared photometric observations were carried out in the J, H, K filter bands and also in the 3.0—3.4 μm region at the 1.2 m telescope at Gurushikkar, India. The effective temperature of the comet was substantially higher than the equilibrium blackbody temperature. A mean superheat value of 1.83 was derived in the post-perihelion phase which implies that a large fraction of the grain population are made up of small and hot grains with radii <0.5 μm. High albedo values of ∼0.4 were also derived in the scattering angle range 135° to 160° which could explain the unusual brightness of comet Hale—Bopp. This revised version was published online in July 2006 with corrections to the Cover Date.     

Zr-in-rutile thermometry in blueschists from Sifnos, Greece

Zr-in-rutile thermometry on samples of blueschist from Sifnos, Greece, yields temperatures that reflect progressive crystallization of rutile from ca. 445 to 505°C with an analytical precision of + 18/−27 and ± 10°C using the electron microprobe and ± 1.5–3.5°C using the ion microprobe. Individual grains are generally homogeneous within analytical uncertainty. Different grains within a single sample record temperature differences as large 55°, although in most samples the range of temperatures is on the order of 25°. In several samples, Zr-in-rutile temperatures from grains within garnet are lower than temperatures from matrix grains, reflecting growth of rutile with increasing temperature of metamorphism. Although the specific rutile-producing reactions have not been identified, it is inferred that rutile grows from either continuous reaction involving the breakdown of lower grade phases (possibly ilmenite), or from pseudomorph reactions involving the breakdown of relic igneous precursors at blueschist-facies conditions. No systematic variation in rutile temperatures was observed across the blueschist belt of northern Sifnos, consistent with the belt having behaved as a coherent block during subduction.