Temporal variability of throughfall as a function of the canopy development stage: from seasonal to intra-event scale

ABSTRACT

The interception process impacts rainfall magnitude and intensity under the canopy. In this study, the effect of plant interception on throughfall characteristics was assessed in the deciduous Caatinga vegetation, at different canopy development stages and for temporal scales ranging from seasonal to the intra-event scale. Throughfall and stemflow percentages were slightly higher at the onset of the rainy season, when leaf area density is low, with resulting lower interception losses. However, there was no statistical difference among the variables at the seasonal scale. At the intra-event scale, average and maximum throughfall intensity at different time intervals showed statistical difference between the stages of canopy development. Regardless of leaf area density and rainfall depth, vegetation is able to retain all the water up to 2 min in the beginning of each rainfall event with accumulated rainfall smaller than 0.6 mm. Furthermore, the Caatinga vegetation attenuates the rainfall intensity by 30–40%.     

The Azambuja fault: An active structure located in an intraplate basin with significant seismicity (Lower Tagus Valley, Portugal)

The Azambuja fault is a NNE trending structure located 50 km NE of Lisbon, in an area of important historical seismicity. It is sited in the Lower Tagus Basin, a compressive foredeep basin related to tectonic inversion of the Mesozoic Lusitanian Basin in the Miocene. The fault is evident in commercial seismic reflection data, where it shows steep thrust geometry downthrowing the Cenozoic sediments to the east. It has also a clear morphological signature, presenting a NNE-SSW trending, east facing, 15 km long scarp, reaching a maximum height of 80 m. The fault scarp is the geomorphic appearance of a flexure expressed as a zone of distributed deformation, where Miocene and Pliocene sediments are tilted eastwards and are cut by steeply dipping meso-scale faults presenting reverse and normal offsets, with a net downthrow to the east. This pattern at the surface is compatible with a steep fault in the basement that tilts and branches through the overlying Cenozoic sedimentary cover. In order to constrain the neotectonic activity of this structure, detailed geological studies were conducted. Morphotectonics was studied through aerial photo interpretation, analysis of topographic maps and digital mapping. Those studies indicate Quaternary slip on the fault in the ranges of 0.05–0.06 mm per year. Seismogenic behaviour was assumed for the Azambuja fault based on the evidence of Quaternary tectonic activity and its location in an area of significant historical seismicity. M _w 6.4–6.7 maximum earthquakes, with recurrence intervals of 10000–25000 years, were estimated based upon the displaced morphological references, cumulative offsets and fault length.     

Metamorphic path constrained by metapelitic rocks from the inner Aiuruoca-Andrelândia nappe, south of the São Francisco craton, SE Brazil

A Nappe system south to southwest of the São Francisco Craton represents the southern extension of the Brasília belt and describes an inverted metamorphic pile of greenschist facies toward amphibolite facies. The Aiuruoca-Andrelândia nappe is one of the nappes of this system. The hind portion of the Aiuruoca-Andrelândia nappe, south of Caxambu and Aiuruoca (MG), consists of a structural-metamorphic domain transported toward the E-NE. There is a metamorphic transition, from the kyanite zone to kyanite and sillimanite coexistence, until the sillimanite zone. Metapelitic rocks preserve high-pressure parageneses (Rt–Ky–Grt–Ms–Bt–Pl–Qtz) and contain retrograde eclogitic rocks. Sil–Pl–Qtz coronitic intergrowths around garnets are common decompressive textures. Kyanite schists register the P_max of 11 kbar at 660 °C and define a decompressive path until 6–7.5 kbar at 650 °C. These P–T conditions represent the equilibrium in S₂ schistosity (amphibolite facies) and the beginning of the cooling path in the Ky–Sil transition. The decompressive path suggests an extrusional process, immediately after burying at about 60 km. Exhumation controlled by convergent events, related to the São Francisco Plate subduction and tectonic erosion, took these units, isothermally, to higher levels (20–33 km). Later, the metamorphic path shifted toward near-isobaric cooling.     

Volcanic red-bed copper mineralisation related to submarine basalt alteration,Mont Alexandre,Quebec Appalachians,Canada

Two types of native copper occur in Upper Silurian basaltic rocks in the Mont Alexandre area, Quebec Appalachians: (1) type 1 forms micrometric inclusions in plagioclase and is possibly magmatic in origin, whereas (2) type 2 occurs as coarse-grained patches rimmed by cuprite in altered porphyritic basalt. Type 1 has higher contents of sulphur (2,000–20,263 ppm) and arsenic (146–6,017 ppm), and a broader range of silver abundances (<65–2,186 ppm Ag) than type 2 (149–1,288 ppm S, <90–146 As, <65–928 ppm Ag). No mineral inclusions of sulphide or arsenide in native copper were observed at the electron-microprobe scale. Primary igneous fabrics are preserved, but the basaltic flows are pervasively oxidised and plagioclase is albitised. Chlorite replaces plagioclase and forms interstitial aggregates in the groundmass and has Fe/(Fe+Mg) ratios ranging from 0.29 to 0.36 with calculated temperatures between 155°C and 182°C. Copper sulphides in vacuoles and veinlets are associated with malachite, fibro-radiating albite and yarrowite (Cu₉S₈ with up to 0.3 wt% Ag). Bulk-rock concentrations of thallium and lithium range from 70 to 310 ppb and 10 to 22 ppm, respectively, and thallium is positively correlated with Fe₂O₃. Such concentrations of thallium and lithium are typical of spilitisation during heated seawater–basalt interaction. Spilitisation is consistent with the regional geological setting of deepwater-facies sedimentation, but is different from current models for volcanic red-bed copper, which indicate subaerial oxidation of volcanic flows. The volcanic red-bed copper model should be re-examined to account for native copper mineralisation in basalts altered by warm seawater.     

Impact of discards of beam trawl fishing on the nematode community from the Tagus estuary (Portugal)

The impact of dead discards, originating from beam trawl fishing on the nematode community from the Tagus estuary was investigated in terms of vertical distribution of the dominant nematode groups. Sediment cores were collected from a mud-flat from the Tagus estuary. Crangoncrangon (Linnaeus, 1758) carcasses were added to the surface of the cores, simulating the settling of dead discards on the sediment. The vertical distribution of the dominant nematode groups was determined up to 4 cm deep at four different moments in time post deposition (0, 2, 4 and 6 h) and compared to control cores. The C.crangon addition to the sediment led to the formation of black spots and therefore oxygen depleted areas at the sediment surface. The Chromadora/Ptycholaimellus group, normally dominant at the surface layer, migrated downwards due to their high sensibility to toxic conditions. Sabatieria presented the opposite trend and became the dominant group at the surface layer. Since Sabatieria is tolerant to oxygen stressed conditions and high sulphide concentrations, we suggest that it migrated opportunistically towards an unoccupied niche. Daptonema, Metachromadora and Terschellingia did not show any vertical migration, reflecting their tolerance to anoxic and high sulphidic conditions. Our study showed that an accumulation of dead discards at the sediment surface might therefore alter the nematode community vertical distribution. This effect is apparently closely related to toxic conditions in the sediment, induced by the deposition of C.crangon at the sediment surface. These alterations might be temporal and reflect an adaptation of the nematode community to dynamic intertidal environments.     

Efficacy of adapted estuarine fish-based multimetric indices as tools for evaluating ecological status of the marine environment

The assessment of ecological status of marine fish communities required by the marine strategy framework directive (MSFD) emphasises the need for fish-based ecological indices in marine waters. In this study we adapt five estuarine multimetric indices to the marine environment and apply them in three types of substrates, analysing the metrics responsible for the obtained patterns of ecological status. The results show inefficiency of the community degradation index (CDI) and the biological health index (BHI) in ecological status assessment and disagreement between the estuarine biotic integrity index (EBI), the estuarine fish community index (EFCI) and the transitional fish classification index (TFCI). Analysis of individual metrics suggests lack of representativeness and consideration for the particularities of each substrate’s typical fish communities. None of the tested indices were efficient on the marine environment, urging the need for new marine indices that account for differences between types of substrate and depth.     

An assessment of the impact of surface currents on wave modeling in the Southern Ocean

This paper presents an assessment of the impact of the ocean circulation on modeled wave fields in the Southern Ocean, where a systematic positive bias of the modeled wave height against altimetry data has been reported. The inclusion of ocean currents in the wave model considerably reduces the positive bias of the simulated wave height for high southern latitudes. The decrease of wave energy in the presence of currents is almost exclusively related to the reduction of the relative wind, caused by an overall co-flowing current field associated with the Antarctic Circumpolar Current. Improvements of the model results are also found for the peak period and the mean period against a long-term moored buoy. At the mooring location, the effect of currents is greater for larger and longer waves, suggesting remotely generated swells are more influenced by the currents than local waves. However, an additional qualitative analysis using high-resolution currents in a finer grid nested to the global coarser grid shows that typical resolution of global hydrodynamic reanalysis is not sufficient to resolve mesoscale eddies, and as a consequence, the simulation of mesoscale wave patterns can be compromised. The results are also discussed in terms of the accuracy of forcing fields.     

The 14th international workshop on wave hindcasting and forecasting and the 5th coastal hazards symposium

Following the 14th International Workshop on Wave Hindcasting and Forecasting and 5th Coastal Hazards Symposium in November 2014 in Key West, Florida, a topical collection has appeared in recent issues of Ocean Dynamics. Here, we give a brief overview of the 16 papers published in this topical collection as well as an overview of the widening scope of the conference in recent years. A general trend in the field has been towards closer integration between the wave and ocean modelling communities. This is also seen in this topical collection, with several papers exploring the interaction between surface waves and mixed layer dynamics and sea ice.