黔西南水银洞金矿床流体包裹体研究

水银洞金矿床是黔西南典型的特大型卡林型金矿床之一。但其成矿流体来源尚有争议。通过对水银洞金矿床脉石英和方解石中流体包裹体的温度与压力、盐度与密度、包裹体成分和包裹体H和O同位素等方面的研究,指出水银洞卡林型金矿床成矿流体属中低温(96.7~220℃)、低盐度(NaCl)0.635%~9.861%,平均值为4.282%±2.260%、中等密度(0.725~0.977 g/cm3,平均值为0.910±0.061 g/cm3);脉石英阶段流体水化学类型属Cl--Na+型或SO42--Cl-Na+型,方解石阶段属SO42--Cl--Ca2+型。成矿流体压力可能为高-超高压(160±40 MPa);成矿流体主要是大气降水形成的地下热水,可能有部分岩浆热液的掺入。     

北祁连西段柳沟峡铁（铜）矿田牙形刺的发现及其地质意义

笔者依据北祁连山西段柳沟峡铁铜矿田原定长城系朱龙关群含铁（铜）矿火山沉积宕系中新发现的牙形刺化石Ｐｈａｋｅｌｏｄｕｓｏｆｆｅｎｕｉｓ（Ｍｕｌｌｅｒ）Ｐｒｏａｃｏｎｔｉｏｄｕｓ；（∈２－３、∈３）和青白口系大柳沟群碳酸盐岩中新发现的Ｔｒｉｐｏｄｕｓ？Ｓｐ（Ｏ１），并与青海郭密寺地区中寒武统黑茨沟群中所发现的牙形刺化石（∈３－Ｏ１）属种相类似而论，认为上述原定地层还有可能重新厘定为寒武一奥陶系和奥陶系。这一发现为研究和恢复北祁连西段区域构造格架及区域构造演化历史提供了早古生代化石依据，对查明铁（铜）矿等的形成环境、总结成矿规律、扩大找矿效果具有较深远的意义。     

新疆北部幔源岩浆矿床的类型、时空分布及成矿谱系

新疆北部与幔源岩浆有关的矿床种类齐全,成矿环境复杂,时代和类型繁多,在中国乃至世界颇具特色。主要矿床类型包括铬铁矿矿床、钒钛磁铁矿矿床、铜镍硫化物矿床、铂族元素(PGE)矿床、铜镍-钒钛铁复合型矿床、含钴磁铁矿矿床、玄武岩自然铜矿床、热液型钴-多金属矿床,以及非金属矿床等。按照含矿地质体的类型,可分为6种类型:蛇绿岩型、层状杂岩型、小侵入体型、阿拉斯加型、浅成岩型和喷出岩型。这些幔源岩浆矿床可划分为3个成岩成矿系列:铜镍系列、钛铁系列和铬铁系列。钛铁系列以碱性层状岩体型钒钛磁铁矿、铁磷矿为代表,岩石具有明显的富Fe特征,属于碱性富铁质的高钛玄武岩系列;铜镍系列以小侵入体型铜镍矿、阿拉斯加型铜镍-PGE矿为代表,岩石属于铁质的拉斑玄武岩-钙碱性系列;铬铁系列主要为蛇绿岩型铬铁矿,岩石具富Mg贫Fe特征,属于镁质系列。3个系列的岩浆都具有亏损地幔源特征,可能都与地幔柱活动有关;岩浆源区富含相应的成矿元素,是形成3个系列矿床相应成矿地质体的主要条件。3个系列矿床的成矿机制可分为深部熔离/岩浆分异、就地分凝、矿浆贯入、岩浆热液等过程。根据各系列矿床之间存在的紧密联系,建立了与幔源岩浆作用有关的3个系列矿床综合模式: 亏损地幔部分熔融产生的幔源岩浆在上升过程中发生熔离/分异,分离为3个系列,由于外部物质加入在地壳深部发生分异和熔离,在不同深度富集形成铬铁矿、钒钛磁铁矿和铜镍硫化物矿床,临近地表时流体富集和分离成含矿流体,分别形成浅成岩型磁铁矿和喷出岩型自然铜矿。新疆北部各类幔源岩浆矿床从早到晚主要产于3期构造阶段/构造类型: 大陆裂解期、板块俯冲期、碰撞/后碰撞造山期(又分3个阶段: 碰撞后伸展阶段、幔柱叠加造山阶段、后碰撞结束阶段)。     

锰矿石脱硫产物处理含铜废水动态实验研究

氧化型锰矿石脱硫产物含大量硫化锰,利用这种材料装填固定床进行净化水中铜离子的动态试验.在材料粒径0.45～0.9mm、进水pH=5.8、进水滤速4.58 m/h条件下,1 t锰矿石脱硫产物可以处理923 tρ(Cu~(2+))=50 mg/L的含铜废水,出水ρ(Cu~(2+))<0.5 mg/L,低于国家一级排放标准.控制进水pH在4～9之间、降低进水滤速、采用较小粒径的材料有利于提高锰矿石脱硫产物处理含铜废水的容量.利用X射线粉末衍射(XRD)和扫描电镜-能谱分析(SEM-EDS)对材料和产物进行表征,证明锰矿石脱硫产物去除水中铜离子是基于离子交换反应的原理.     

基于离散元模拟的二元颗粒柱坍塌特性研究

常见的地质灾害如滑坡、泥石流、岩崩等通常都涉及不同形状的颗粒物质运动,这些形状不同的颗粒又多具有不同的尺寸和含量。基于典型的颗粒柱坍塌试验,首先根据试验方法确定了离散元模拟所需的各项参数,然后采用随机多面体方法生成了可控制长细比的大颗粒,利用离散元法就不同大颗粒含量下形态变化对二元颗粒柱坍塌特性的影响开展研究,研究结果表明:(1)利用离散元法可以较好地重现室内试验中小球和多面体组成的二元颗粒系统的颗粒柱坍塌过程;(2)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱系统中,当大颗粒含量高于临界含量值20%时,二元颗粒柱坍塌持续的时间随非球形大颗粒长细比的增加而增加;(3)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱中,当大颗粒含量高于临界含量值20%时,在相同百分比的大颗粒含量下,大颗粒长细比的增加会提高大颗粒平均配位数以及降低颗粒的运动能力,大颗粒间形成更强的互锁作用,降低了颗粒柱的整体流动性,使其最终堆积高度更高、最大跑出距离更短以及更小的归一化动能峰值。(4)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱中,小颗粒可以较为明显降低大颗粒间摩擦及互锁作用,增加流动性,降低大骨料形态对坍塌过程的影响。     

Adsorption of phenanthrene on Al (oxy)hydroxides formed under the influence of tannic acid

Although there has been substantial research done on adsorption of metals/metalloids by Al (oxy)hydroxides, little is known regarding the adsorption of polyaromatic hydrocarbons (PAHs) on Al (oxy)hydroxides, especially those formed in the presence of organic acid. This paper investigated the adsorption of phenanthrene on Al (oxy)hydroxides formed with initial tannate/Al molar ratios (MRs) 0, 0.001, 0.01, and 0.1 (referred to MR0, MR0.001, MR0.01, and MR0.1, respectively) through batch adsorption experiments and FTIR study. The results showed that Al (oxy)hydroxides were important sorbents for phenanthrene. The adsorption kinetic data were fitted well with the pseudo-second-order equation. According to a modified Freundlich model, the adsorption capacities of Al (oxy)hydroxides followed a descending order of MR0.1 > MR0 ≥ MR0.01 > MR0.001, which was inconsistent with the organic carbon content in the Al (oxy)hydroxides. Adsorption capacity correlated with the specific surface area, micropore area, and micropore diameter of Al (oxy)hydroxides, yet the relationships were not statistically significant (P > 0.05). FTIR results showed that physical interaction was essential in phenanthrene adsorption onto the Al (oxy)hydroxides, which could be explained by an entropy-driven process. Surface hydrophobicity of Al (oxy)hydroxides played a key role in phenanthrene adsorption. Additional π–π electron donor–acceptor interaction of phenanthrene (acting as electron donor) with aromatic ring of tannic acid (electron acceptor) could be also important in phenanthrene adsorption by high MR Al (oxy)hydroxides, yet it needs further study. The findings obtained in the present study are of fundamental significance in understanding the mechanism of immobilization of PAHs in low organic matter but oxide-rich soils.     

煤矸石释放重金属环境效应研究--淮南煤矿塌陷区水体试验场实例调查

概要分析了淮南新孜5号井煤矸石所含的重金属元素对塌陷区鱼塘水质的影响,指出除个别水样中Zn、Cu超标外,其他均不超标,该鱼塘水质适宜养鱼要求。矸石样与华北及整个地壳泥岩中元素的丰度比,矸石中Cr、Pb、Zn与泥岩丰度基本持平,而Cd、Cu均超过其他泥岩中丰度值。因此,煤矸石在地面遭受风化,其所含有害物质可能会释放到环境,在煤矸石堆放处适当进行监测还是必要的。     

New data on mineralogy and metallogeny of scarns in the Pitkyaranta ore region

A wide application of modern precision research techniques to the studies of Pitkyaranta ores allowed us to find increased contents of indium (to 0.33%), silver (447 g/t), gold (0.2–0.4 g/t), and palladium (0.2 g/t). A series of rare minerals previously not found here was also discovered. Among ore minerals, these are roquesite, zavartskite, electrum, stutzite, altaite, bismite, glaucodot, cervelleite, hedleyite, pavonite, cannonite, plantnerite, lindkvistite, ashoverite, etc. The discovery of roquesite and electrum is the most important in terms of metallogeny. Roquesite (indium sulfide) is found in Karelia for the first time. The highest indium contents in direct correlation to those of zinc are characteristic for polymetallic ores of the Pitkyaranta ore fields with sphalerite as the concentrating mineral (to 0.5% of In). The predicted zinc resources are evaluated to ∼2.5 million t for the Pitkyaranta group of ore deposits, and to 400 000 t for the Hopunvaara region. Respectively, the resources of indium amount to ∼2400 t (total) and 600 t for the Hopunvaara region.     

山东昌乐锆石的宝石学特征及化学成分研究

在实地考察和分析前人资料的基础上,简要地介绍了山东昌乐锆石的产出特征。通过常规的宝石学测试方法、X-射线荧光光谱分析和激光剥蚀电感耦合等离子体质谱仪（LA-ICP-MS）对该地区锆石的物理性质、内外部特征及化学成分进行了研究。结果表明,该地区锆石粒度较大,整体透明度较好,颜色呈深浅不一的褐色,以深褐色为主;主要由ZrO2和SiO2组成,微量元素主要有Fe,Ti,P,Sc,Ni等杂质元素,还有部分放射性元素和稀土元素;放射性元素主要为U和Th,Th/U比值均大于0.4（1个数据例外）;稀土元素以富钇族元素为特征,富集HREE,明显的Ce正异常（2～13）,微弱的Eu负异常（0.69～0.76）。另外,昌乐锆石放射性核素的放射性比活度非常低。综合特征表明,昌乐锆石是一种具有利用价值的宝石资源。     

Mineralogy of morphogenetic types of ferromanganese deposits in the world ocean

The mineralogy and structural features of the main types of ferromanganese deposits—nodules, micronodules, Co-bearing crusts, crustlike nodules, and low-temperature hydrothermal manganese crusts and ferruginous ochers—are considered. The correlation between their mineral composition and structure is shown. The proposed classification of mineral types is based on characteristic assemblages of Fe and Mn minerals.