基于SilverLight和REST的富网络地理信息系统框架设计

 在WebGIS的快速发展过程中,其架构方法和实现技术的研究一直是人们关注的热点。本文针对传统WebGIS开发复杂度高、交互体验性贫乏、运行效率低等不足,在对RIA/SilverLight和REST技术的研究基础上,以整体结构模块化,开发行为统一化,代码可复用及经验可复用的指导思路下,提出由空间数据服务器(数据访问层DAL)、GIS服务和Web服务服务器(业务逻辑层BLL)及部署有SilverLight插件的浏览器(表现层UI)组成的3层架构式富网络地理信息系统,并阐述了数据层中空间属性数据库的设计和建立步骤以及优化经验,分析了业务逻辑层的构成和运行机制,为提高系统开发效率使用MVVM(Model-View-View Model,模型－视图－视图模型)设计模式,将表现层分为前端用户界面和后台逻辑两部分,并描述了用户熟悉的Office Ribbon设计样式的开发方法,说明了后台逻辑架构组件各自功能及通讯路径。最后,为验证此框架能够有效提高系统开发效率、丰富用户体验和改善系统运行性能表现等优势,利用SilverLight(C#)实现了应用实例——LightGIS。系统开发和运行实验表明,该框架能够很好地达成以下目的:(1)实现优美的用户操作界面和丰富的互操作性体验;(2)提供平滑、流畅的地图服务和高响应性空间分析;(3)具备优秀的系统可扩展潜力和可配置性。     

宁洱6.4级地震灾情信息特征分析

选取2007年宁洱6.4级地震发生后一周内政府收集和上报的灾情档案资料中的人员伤亡和财产损失两类主要信息为基础资料,对该次地震的灾情信息特征进行初步分析.结果表明:灾情信息来源的主体为县级政府部门,描述方式以定量为主.在地震发生后4h内以定性描述为主,4～12h期间定性描述与定量描述都有,12 h后以定量描述为主;单位时间内灾情信息获知和上报的数量随时间的推移先逐渐增加,到达峰值后逐渐减少,最后趋于平稳;从信息随时间变化情况来看,最先掌握死亡人员数量,接着是重伤人员数量,最后是受伤人员数量;与地震灾害直接经济损失评估结果比较,房屋损失信息更直接地反应本次地震损失.     

GPS卫星轨道精度对定位结果的影响

卫星轨道误差是影响定位精度的重要误差源,在轨道精度、表示方式和实时性等方面对广播星历、超快速星历、快速星历和精密星历进行了比较分析,得出广播星历与精密星历所提供的卫星轨道相差较大,超快速星历居中,快速星历轨道与精密轨道接近,在测量设备的高精度比对鉴定中,满足不同试验需求对卫星星历的选择提供了依据。     

隧道衬砌厚度不足的健康判据试验研究

针对目前隧道健康诊断指标判据不统一的现状,采用室内相似模型试验,结合实际工程实例,研究了隧道支护结构衬砌减薄状态下围岩与支护结构破坏规律与极限承载能力,得出了隧道支护结构在相应的受力状态下健康状态判据。结果表明：隧道衬砌支护结构的位移特征以拱肩的压入和拱顶的挤出为主,随着拱顶衬砌支护结构减薄量的增加,支护结构衬砌与围岩之间的接触应力逐渐减小,结构的承载能力逐渐下降,隧道拱顶部位的位移增加,其柔性逐渐增大,隧道拱顶内侧被压溃,外侧受到拉力作用而开裂,随后隧道拱腰和边墙出现裂纹,最后逐渐扩展贯通;隧道承载力曲线呈现明显的“S”型,据此可以划分为承载力缓慢退化阶段、快速退化阶段和退化完成阶段,相对应的阶段可以划分为隧道结构的健康等级与级别,为工程应用提供了参考依据     

多种地球化学异常下限确定方法的对比研究

地球化学异常下限值是区分背景区与异常区的基本参数,而异常下限的准确性直接关系到下一步找矿工作的实施。本文以青海省治多县区域1∶1万土壤化探样品中Ag、Cu、Zn、Pb、Bi、Mo、W七种元素为例,使用传统计算方法、85%累计频率法、分形方法对测试数据进行处理,对比研究认为:传统计算方法求得的异常范围小,且较为分散;85%累计频率法与传统方法所得异常下限值比较接近,具有合理性与客观性,相对于传统计算方法,分形方法对弱小异常的识别效果显著,但异常范围过大,给异常查证工作带来难度。确定异常下限值时要研究数据分布模式和地质背景,分析区域地球化学特征差异,应采用多种分析法对比确定合理的异常下限,圈定出有效的异常区。     

渗流井合理竖井降深确定

通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响.建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程.提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定.对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节.     

Geochemical Characteristics of Volcanic Rocks from ODP Site 794, Yamato Basin: Implications for Deep Mantle Processes of the Japan Sea

Deep mantle processes and the dynamic mechanism of magmatism in the Japan Sea Basin are important processes that have not been studied in detail. In this paper, systematic evaluation of basalt samples from the ocean drilling program Site 794 in the Japan Sea was performed, which included petrography, whole-rock major- and trace-element analysis, Sr-Nd-Pb isotopic composition, and electron microprobe analysis of plagioclase and clinopyroxene. These basalts belong to the tholeiitic series with porphyritic texture and massive Ca-rich plagioclase, clinopyroxene, and minor olivine phenocrysts. The basalts are characterized as flat rare earth elements and high-field-strength elements with remarkably low ratios of(La/Yb)N(0.75–2.51), significant positive anomalies of Ba, Sr, and Rb and no Eu anomaly(δEu = 0.99–1.36). The samples showed relatively high 87Sr/86Sr(0.70425–0.70522), 207Pb/204Pb(15.511–15.610), and 208Pb/204Pb(38.064–38.557) values and a low 143Nd/144 Nd ratio(0.51271–0.51295). The basalts from Site 794 can be divided into upper, middle, and lower volcanic rocks(UVR, MVR, and LVR) on the basis of their stratigraphic level. The MVR was geochemically derived from the depleted mantle, whereas the UVR and LVR originated from a nondepleted and relatively enriched mantle source with contributions from subducted Pacific plate fluid and sediments. Use of geothermobarometers indicates that the crystallization pressure for the UVR and LVR(6.25–11.19 kbar) was significantly higher than that of the MVR(3.48–5.84 kbar). The UVR and LVR may have been derived from the low-degree(5%–10%) partial melting of spinel lherzolite, while the MVR originated from a shallower mantle source with a high degree(10%–20%) of partial melting. In addition, the geochemical characteristics of the samples are consistent with a younger age(13–17 Ma) and the depleted composition of the MVR and an older age(17–23 Ma) and slightly enriched composition of the UVR and LVR. Therefore, temporal changes in the mantle source from old and enriched to young and depleted and subsequently to old and nondepleted may have been associated with progressive lithospheric extension and thinning, as well as at least two episodes of diverse asthenospheric upwelling and pull-apart tectonic motion in the Yamato Basin.     

北斗广播电文钟差模型精度评估及改善策略

星载原子钟是北斗卫星导航系统(BDS)的核心设备,其钟差模型是北斗广播电文的重要组成部分,模型精度直接影响BDS的服务性能.本文采用星地双向时频传递(TWSTF)钟差测量为参考,评估了BDS广播电文钟差模型精度,结果表明BDS广播电文钟差模型精度优于2 ns(数据龄期小于12 h).针对BDS广播电文钟差参数解算问题,...     

New Study of Anshunsaurus huangnihensis Cheng, 2007 (Reptilia: Thalattosauria): Revealing its Transitional Position in Askeptosauridae

The skull of Anshunsaurus huangnihensis Cheng, 2007, especially the skull roof, is described in detail in this paper. Compared to other genera and species of Askeptosauroidea, Anshunsaurus huangnihensis has some important transitional characters from Askeptosaurus italicus to Anshunsaurus huangguoshuensis: the rostral length related to the skull length between Askeptosaurus italicus and Anshunsaurus huangguoshuensis; the postfrontal existing but distinctly reduced; the posterolateral process relatedly short and overlapping the parietal. The phylogenetic analysis weakly supports the evolutional progress from Anshunsaurus huangnihensis to Anshunsaurus huangguoshuensis. The skeletal ratios indicated that the node among the Askeptosauridae ingroup. The evolutional direction of Askeptosauridae should be from Askeptosaurus italicus to Anshunsaurus huangguoshuensis. The skeletal ratios indicated that the evolutional progress is Askeptosaurus italicus – Anshunsaurus huangnihensis – Anshunsaurus huangguoshuensis. In biogeography provinces, the Askeptosauroidea taxa from south China have a close relationship with those from western Tethys; however, Xinpusaurus from the Late Triassic is more related to those from the eastern Pacific.     

新疆、青海、俄罗斯糖白玉的宝石学特征对比分析

为了查明新疆、青海、俄罗斯三地所产糖白玉的结构、成分和成因差异,在观察原料外观特征的基础上,采用常规宝石学方法、偏光显微镜、X射线粉末衍射仪和电子探针研究新疆、青海、俄罗斯糖白玉样品,从结构类型、矿物组成、化学成分和成因特征等方面进行对比分析。结果表明,以上三地糖白玉的主要矿物组成均为透闪石,次要矿物组成则各有不同。新疆、俄罗斯糖白玉以毛毡状变晶结构为主,青海糖白玉以纤维状变晶结构和纤维-隐晶质变晶结构为主;初步认定以上三地糖白玉的糖色为次生色,主要由褐铁矿导致。结合相关地质背景和风化作用特征,推测以上三地糖白玉不同的外观特征主要受玉体成矿后期和成矿期结束后周围环境变化的影响。