长江冲淡水区细菌生产力研究

为了解细菌在长江口冲淡水区生态系营养动力学过程中的重要作用,笔者于1997年10月10日至20日,1998年5月14日至6月1日在观测海区以及在绿华山海域设置大水体围隔生态系实验装置进行细菌生产力的现场观测研究.结果表明,秋季观测海区平均细菌生产力(C)为(1.44±1.30)μg/(dm3·h),高值出现在测区中部的A₃,B₃和C₃站.春季测区表层细菌生产力(2.43±1.22)μg/(dm3·h)高于底层(1.01±0.43)μg/(dm3·h),高值出现在测区中部的A₃和B断面诸站.秋、春季平均细菌生产力相当于浮游植物初级生产力的23%.秋季和春季表层细菌数量分别为(5.22×108±0.88×108)个/dm3和(1.97×108±1.10×108)个/dm3.1998年5月18日至6月1日在围隔实验点的自然海区中细菌生产力变幅范围为0.13～5.79μg/(dm3·h),平均值为(2.47±1.60)μg/(dm3·h).围隔装置内加可溶性磷(PO₄3-)实验,春季细菌生产力由1.28μg/(dm3·h)增长至32.20μg/(dm3·h),其增长幅度低于秋季1.43～43.47μg/(dm3·h).油污染实验中细菌生产力由6.61μg/(dm3·h)增长至37.97μg/(dm3·h),呈逐日上升趋势.     

北太平洋亚热带环流区表层水中226Ra和228Ra的分布与变化

对1999年9～10月采自北太平洋亚热带环流区的19份表层海水样品的Ra同位素分析表明。研究海域表层水中的^226Ra、^228Ra放射性比度分别介于0．67～0．92、0．08～0．30Bq／m^3之间，平均值分别为0．74、0．11Bq/m^3．^226Ra/^228Ra)A．R．活度比的变化范围为0．11～0．44，平均值为0．19．上述数值明显低于近岸海域水体的相应值，表现为典型的开阔大洋水的特征．从空间分布的特征看，研究海域Ra同位素含量与^226Ra/^228Ra)A.R.值均呈均匀分布态势．将本研究结果与历史数据进行对比后发现，本研究获得的^226Ra、^228Ra放射性比度比20世纪60～80年代得到的数据来得低，可能与水体层化作用加强导致的Ra补充量的减少以及生物生产力升高导致的Ra迁出量的增加有关．北太平洋亚热带环流区表层水中Ra同位素的时间变化与文献报道的该海域叶绿素a、硅酸盐、磷酸盐含量与初级生产力的历史变化趋势相吻合．     

台湾海峡隧道工程的若干工程地质问题与选线方案探讨

对台湾海峡的地质状况了进行了分析，作者认为，台湾海峡的工程地质条件复杂，地震、活动断裂、岩土体稳定性、海底底床活动性等是隧道工程将遇到的主要工程地质问题。隧道的线路选择应进行全面、深入的技术、经济比较。平潭至新竹和厦门经澎湖至嘉义海滨是两个可选的隧道线路方案。     

南海罗斯贝变形半径的地理及季节变化

根据南海 1°× 1°网格的标准层季节平均温、盐度资料 ,在未引入Boussinesq近似条件下 ,采用改进的Thompson Haskell算法求解线性化斜压海洋水平大尺度波的垂直结构方程 (重力内波方程 ) ,从而得到了南海各网格点的第一斜压重力波相速度和相应的罗斯贝变形半径 ,并探讨其地理分布和季节变化特征 ,以期有助于南海环流和中尺度涡旋以及有关海洋侧边界效应的研究。     

松辽盆地西部张裂缝预测的应力场方法

以松辽盆地地质资料为基础，介绍了应力场和张裂缝预测的计算方法。通过了各种岩性的张破裂概率隶属函数，预测松辽盆地酉部张裂缝区的分布。据此，为今后的油气勘探提出了几点认识和建议。     

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.     

山溪性可冲性强潮河口曹娥江高水位初步研究

应用多年的实测资料 ,分析了曹娥江河口高水位成因 ,结果表明 ,曹娥江河口洪水位具有山溪性和可冲性的特点 ,人类活动对高水位有较大影响。应用统计分析法和成因分析法推求 1 %设计高水位 ,讨论了成因分析法中上、下边界条件的选取 ,其选取原则对其他潮汐河口确定设计高水位具有借鉴意义     

一种具有巨大经济价值的海洋矿产资源--砂石土

砂石土指第四纪堆积的泥、土、砂，为一种极为重要的资源。我国具有丰富的海洋砂石土资源。以广东海域为例，通过资料的综合分析，探讨了海岸砂石土资源的重要作用，并提出其开采应注意的问题。     

Combined refraction and diffraction models for sea waves over complicated topography and with currents in shallow water

-Combined refraction and diffraction models in the form of linear parabolic approximation are derived through smallparameter method. More strictly theoretical basis and more accuracy in the models than Lozano's (1980) are obtained. Some theoretical defects in Liu's model (1985) with consideration of current are not only found but also eliminated. More strict and accurate models are, therefore, presented in this paper.The calculation results and analysis in applying the models to actual wave field with consideration of bottom friction will be given in the following paper.     

AHP RESIN AND ITS URANIUM ADSORPTION MECHANISM

I. INTRODUCTION AHP resin is a new type of adsorbent and has been studied by the units concernedfor several years. There is little report about this work so far. AHP resin was synthesizedin aqueous phase with tetra-ethylene pentamine (TEPA), epichlorohydrin (ECH) andC-reagent as raw materials, and basic zinc carbonate (P_Z_n) and rubber solvent oil (120Gasoline) as pore-forming material. Compared with the technique of the amorphous lumpresin and that of the resin synthesized in oil phase, the new technique of resin synthesizedin aqueous phase manifests many advantages, such as raising the capacity of uranium-adsorption of the resin, simplifying the after-treatment process, reducing the cost, etc. Sea water, in which all kinds of cation and anion exist, is a system of electrolytes,and the concentrations of many ions are higher than the concentration of uranium for