Effect of free surface and strut on fins attached to a strut

An extensive experimental and computational investigation of the combined and separate effects of free surface and body on the lift characteristics of a pair of fins attached to a strut and fin alone is conducted. The results reveal that the free-surface effect becomes significant when the depth of submergence to chord ratio (H/c) is less than three. The effect of the strut is also realized for shallower depth of submergence of the fins through free-surface deformation leading to a significant change in the incidence angle of the flow to the fins. The numerical results based on the Higher Order Boundary Element Method with the linearized free-surface condition show good agreement with the experimental results for fin (foil) alone even at shallow submergence, but some discrepancies appear for the fin attached to the strut at higher speeds mostly due to the neglect of the nonlinear free-surface effect.     

Use of Recycled Polyethylene Terephthalate Strips in Soil Improvement

Geotechnical and Geological Engineering - Many studies have investigated polyethylene terephthalate (PET) and polypropylene fibers in soil improvement. However, there is a lack of research using...     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

Short-term environmental variability in cold-water coral habitat at Viosca Knoll,Gulf of Mexico

The Lophelia pertusa community at Viosca Knoll (VK826) is the most extensive found to date in the Gulf of Mexico. As part of a multi-disciplinary study, the physical setting of this area was described using benthic landers, CTD transects and remotely operated vehicle observations. The site was broadly characterised into three main habitats: (1) dense coral cover that resembles biogenic reef complexes, (2) areas of sediment, and (3) authigenic carbonate blocks with sparse coral and chemosynthetic communities. The coral communities were dominated by L. pertusa but also contained numerous solitary coral species. Over areas that contained L. pertusa, the environmental conditions recorded were similar to those associated with communities in the north-eastern Atlantic, with temperature (8.5–10.6 °C) and salinity (～35) falling within the known species niche for L. pertusa. However, dissolved oxygen concentrations (2.7–2.8 ml l^?1) and density (σ_Θ, 27.1–27.2 kg m^?3) were lower and mass fluxes from sediment trap data appeared much higher (4002–4192 mg m^?2 d^?1). Yet, this species still appears to thrive in this region, suggesting that L. pertusa may not be as limited by lower dissolved oxygen concentrations as previously thought. The VK826 site experienced sustained eastward water flow of 10–30 cm s^?1 over the 5-day measurement period but was also subjected to significant short-term variability in current velocity and direction. In addition, two processes were observed that caused variability in salinity and temperature; the first was consistent with internal waves that caused temperature variations of 0.8 °C over 5–11 h periods. The second was high-frequency variability (20–30 min periods) in temperature recorded only at the ALBEX site. A further pattern observed over the coral habitat was the presence of a 24 h diel vertical migration of zooplankton that may form part of a food chain that eventually reaches the corals. The majority of detailed studies concerning local environmental conditions in L. pertusa habitats have been conducted within the north-eastern Atlantic, limiting most knowledge of the niche of this species to a single part of an ocean basin. Data presented here show that the corals at VK826 are subjected to similar conditions in temperature, salinity, and flow velocity as their counterparts in the north-east Atlantic, although values for dissolved oxygen and density (sigma-theta: σ_Θ) are different. Our data also highlight novel observations of short-term environmental variability in cold-water coral habitat.     

Microvariability and fast variability of stars. I. standard stars

This is a study of observations of the photometric quantities Vt and Bt, reported in the Hipparcos catalog, for 15 standard stars in order to search for microvariability and rapid variability in their emission. The microvariability is found to be characterized mainly by smooth fluctuations in the brightness. Changes in the magnitudes of the stars HD 28355 and HD 130109 with a period of ~150 min and an amplitude <0^m.02 appear to be caused by vertical shifts in their photospheres. Changes in the magnitudes with an amplitude of ~0^m.01 and a period of 11.4^d in the star e Eri were related to the rotation of spots. A similar microvariability period and amplitude in the star 51 Peg most likely originates in the influence of a planet.     

Atomistic computer modeling of the local structure and mixing properties of a grossular-uvarovite solid solution

An original methodology for the atomistic computer modeling of solid solutions was applied for the study of the mixing properties and local structure of the grossular-uvarovite, i.e., Ca₃Al₂[SiO₄]₃ Ca₃Cr₂][SiO₄]₃, garnet series. The parameters of the interatomic potentials for end members of this series were optimized using experimental data on their structural, elastic, and thermodynamic characteristics. The optimized model of the potentials allowed us to describe the elastic, structural, and thermodynamic characteristics of grossular and uvarovite and estimate the energy of point defects in these crystal structures. Calculations of the mixing properties and local structure for seven different compositions of the solid solution were carried out on a “Chebyshev” supercomputer (Moscow State University) in a 2 × 2 × 4 supercell of the garnet-type structure containing 2560 atoms. Mixing properties, such as the enthalpy of mixing, parameters of interaction, excess mixing volume, deviation of bulk modulus from additivity, and the vibrational and configuration contribution to the entropy of mixing, were determined. This allowed us to estimate the stability field for the grossular-uvarovite solid solution. Histograms of the interatomic distances M-O (M = Ca, Al, Cr, Si) and O-O in supercells were plotted and the parameters of relaxation and changes of the CrO₆ and AlO₆ octahedron volumes were estimated. The data of the simulation are quite consistent with the experimental data on this system and supplement it significantly.     

Recognition of geochemical footprints of mineral systems in the regolith at regional to continental scales

Understanding the character of Australia's extensive regolith cover is crucial to the continuing success of mineral exploration. We hypothesise that the regolith contains geochemical fingerprints of processes related to the development and preservation of mineral systems at a range of scales. We test this hypothesis by analysing the composition of surface sediments within greenfield regional-scale (southern Thomson Orogen) and continental-scale (Australia) study areas. In the southern Thomson Orogen area, the first principal component (PC1) derived in our study [Ca, Sr, Cu, Mg, Au and Mo at one end; rare earth elements (REEs) and Th at the other] is very similar to the empirical vector used by a local company (enrichment in Sr, Ca and Au concomitant with depletion in REEs) to successfully site exploration drill holes for Cu–Au mineralisation. Mapping of the spatial distribution of PC1 in the region reveals several areas of elevated values and possible mineralisation potential. One of the strongest targets in the PC1 map is located between Brewarrina and Bourke in northern New South Wales. Here, exploration drilling has intersected porphyry Cu–Au mineralisation with up to 1 wt% Cu, 0.1 g/t Au, and 717 ppm Zn. The analysis of a comparable geochemical dataset at the continental scale yields a compositionally similar PC1 (Ca, Sr, Mg, Cu, Au and Mo at one end; REEs and Th at the other) to that of the regional study. Mapping PC1 at the continental scale shows patterns that (1) are spatially compatible with the regional study and (2) reveal several geological regions of elevated values, possibly suggesting an enhanced potential for porphyry Cu–Au mineralisation. These include well-endowed mineral provinces such as the Curnamona and Capricorn regions, but also some greenfield regions such as the Albany-Fraser/western Eucla, western Murray and Eromanga geological regions. We conclude that the geochemical composition of Australia's regolith may hold critical information pertaining to mineralisation within/beneath it.