The development of subgrain misorientations with strain in dry synthetic NaCl measured using EBSD

The development of subgrain boundary misorientations with strain in dry, synthetic NaCl polycrystals, deformed at elevated temperature, has been investigated using electron backscattered diffraction (EBSD). At low natural strains, up to 0.5, average misorientations of subgrain boundaries increase with strain and a power law relationship exists between strain and average misorientations. The average misorientations are strongly influenced by grain orientation, suggesting that the misorientation–strain relationship may also be texture dependent in materials with high plastic anisotropy, like NaCl. A slight grain size dependency of the average misorientations was observed. The results indicate that with suitable calibration, average subgrain boundary misorientations may offer a method for estimating the strain accommodated by dislocation creep in NaCl and thus perhaps in other geological materials, although current theories for polycrystalline plasticity imply that misorientations may also depend on stress in some situations.     

How a wet tropical rainforest copes with repeated volcanic destruction

The Holocene Period for the province of West New Britain, Papua New Guinea, is characterised by periodic catastrophic volcanism. The region is mantled in dense wet tropical rainforest, and has been occupied by people since the Pleistocene. Analyses of peat from two nearby sites within a lowland rainforest environment provide us with a macro-level landscape account of the periodic destruction and recovery of the coastal forests during seven periods of volcanic activity in the latter part (2900 yr ago to present) of the Holocene. Radiocarbon dating shows the very close correlation of the peat and tephra layers at both sites, yet the pollen analysis reveals different vegetation communities. These initial results allow us to begin identifying the processes of recovery, and to recognise different ecological pressures placed on vegetation at these neighbouring sites. Evidence of hydrological changes are observed beginning with a marine incursion recorded at Garu Site 3 1360 ¹⁴C yr B.P. The distinct differences in the vegetation re-establishment and community regeneration rates suggest the greater level of disturbance at Garu Site 1 could be related to the depth of the ashfall, although the proximity of a known human settlement may also be a contributing factor. Of note, palynologically, we found that the fern spore flora is particularly rich and believe it will be useful for ecological interpretation.     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Geology and Metal Contents of the Ruttan volcanogenic massive sulfide deposit, northern Manitoba, Canada

The Paleoproterozoic Ruttan Cu–Zn volcanogenic massive-sulfide (VMS) deposit is a large, relatively low grade, bimodal-siliciclastic type deposit in the Rusty Lake volcanic belt of northern Manitoba. The deposit contained over 82.8 million tonnes of massive sulfide, of which 55.7 million tonnes were mined from 1973 to 2002. The deposit consists of a series of moderately to steeply dipping, south-facing lenses that extend along strike at the surface for 1.1 km and to a depth of 1.0 km. These lenses occur within a steeply dipping, bimodal volcanic, volcaniclastic and siliciclastic sequence. In the immediate mine area, transitional calc-alkalic to high-silica (tholeiitic), felsic, and intermediate volcanic/volcaniclastic rocks of the Mine Sequence are host to, and intercalated with, the massive-sulfide lenses. Transitional tholeiitic to calc-alkalic basalt and andesite are present in the footwall sequence, approximately 500 m down-section from the ore horizon. The overlying rocks are predominantly fine-grained volcaniclastics and siliciclastics, but include polyfragmental agglomerate that contains mafic bombs and scoriaceous felsic fragments. Syn-depositional felsic and mafic dikes, sills, and apophyses are ubiquitous throughout the Mine Sequence, including the ore lenses, indicating continued, near-vent magmatism, and volcanism during ore formation. Fabrics in altered hostrocks have consistent, down-plunge stretching lineations to the SSE that suggest the deposit has been elongated by a factor of ~1.2–1.5; otherwise, the deposit is remarkably undeformed. Syn- and post-depositional faults in the mine area have relatively minor displacements up to tens of meters. Proximal (within 200 m) footwall rocks exhibit moderate to strong chloritization, characterized by the upper greenschist to lower amphibolite facies assemblages that include cordierite–almandine–andalusite–sillimanite–biotite ± staurolite ± anthophyllite ± talc, and local silicification. The proximal hanging wall rocks are characterized by sericite ± gahnite alteration, which is restricted to within approximately 75 m of the uppermost lenses. Additional gangue minerals are anhydrite and carbonate minerals (siderite, dolomite, ankerite, and calcite), as well as chlorite, sericite, biotite, talc, and quartz. Carbonate (excluding siderite), potassium feldspar, silicification and epidotization are common distal alteration zones in the footwall to the Mine Sequence several kilometers to the northeast. There are three principal groups of massive sulfide lenses; the East lenses, the West lenses, and the Western Anomaly lenses to the far west. In general, Cu is relatively enriched at the stratigraphic base and in the center of the deposit, whereas Zn is enriched upsection and at the outer margins. Some of the Zn-rich ore exhibits primary mineralogical layering. Parts of the West and Western Anomaly lenses show two layers with Cu-rich bases and Zn-rich tops. The massive sulfide is typically 10–40-m thick; one area along the margin of the main lenses is over 130-m thick and may represent deposition adjacent to a syn-depositional fault. The main sulfide phases are pyrite, pyrrhotite, chalcopyrite, sphalerite, and galena, with tetrahedrite as the most abundant trace phase. Gahnite is ubiquitous in the chlorite-rich assemblages adjacent to the ore lenses. The average base, precious and trace metal contents estimated from Cu and Zn concentrates, and from millhead grades and recoveries. Metals easily transported as chloride and bisulfide complexes in hydrothermal fluids including: Pb, Ag, In, Cu, Cd, Au, and Zn are enriched by 1.5–2.5 orders of magnitude in comparison to the bulk continental crust. Other elements such as Sn, Mo, and As are at near-crustal concentrations, whereas Mn, Ga, and Co are significantly depleted in comparison to the crust. Calculated metal concentrations in the average hydrothermal fluid based on the average metal contents are comparable to, or higher than those measured at sediment covered ridge hydrothermal systems, which precipitate much of their metal budget in the subsurface. Average rare earth element contents for the sulfide are light rare earth element enriched (La_N/Yb_N=22) and range from 0.45 to 0.02x chondritic values, with a moderate negative Eu anomaly (Eu*=0.51). Metal and trace element contents in the Ruttan exhalite horizon, and in proximal (within 1–2 km) exhalites along strike from the 0.6 million tonne Dar-2 Cu–Zn deposit 12 km south of Ruttan, have positive Eu anomalies, whereas negative Eu anomalies are present at distance. The positive Eu anomalies reflect high temperature paleoseafloor hydrothermal venting and precipitation of Eu²⁺-enriched clays and possibly carbonates, and indicate proximity to base-metal deposits. Silver and lead are also enriched in the exhalites near the deposits, whereas Mn is enriched at ~1–3 km along strike, but not consistently. Editorial handling: B. Gemmel An erratum to this article is available at .     

Development of an integrated conceptual model for the rational management of the transboundary Nestos River, Greece

This paper provides a detailed analysis of the geologic, hydrologic and hydrogeologic characteristics of Nestos River basin, which is formed within the Greek mountainous part of the river. The quantitative analysis was mainly based on the data of the river flow in different gauging points across the rivercourse as well as on the data of groundwater discharge from karst springs of the mountainous area while important conclusions were made regarding the hydraulic connection between the surface waters of the river and the groundwater of the karst aquifers of the basin. The qualitative analysis has shown that the quality of both surface waters and groundwaters of the investigated basin is high, whereas, no sources of contamination were indicated during this research. The possible effects of the two large dams of Platanovrisi and Thesavros are also analysed as they strongly affect the quantitative and qualitative regime of the river delta.     

Continuous Gradations among Primary Carbonatitic, Kimberlitic, Melilititic, Basaltic, Picritic, and Komatiitic Melts in Equilibrium with Garnet Lherzolite at 3-8 GPa

Multianvil melting experiments in the system CaO–MgO–Al₂O₃–SiO₂–CO₂(CMAS–CO₂) at 3–8 GPa, 1340–1800°C, involvingthe garnet lherzolite phase assemblage in equilibrium with CO₂-bearingmelts, yield continuous gradations in melt composition betweencarbonatite, kimberlite, melilitite, komatiite, picrite, andbasalt melts. The phase relations encompass a divariant surfacein P–T space. Comparison of the carbonatitic melts producedat the low-temperature side of this surface with naturally occurringcarbonatites indicates that natural magnesiocarbonatites couldbe generated over a wide range of pressures >2·5 GPa.Melts analogous to kimberlites form at higher temperatures alongthe divariant surface, which suggests that kimberlite genesisrequires more elevated geotherms. However, the amount of waterfound in some kimberlites has the potential to lower temperaturesfor the generation of kimberlitic melts by up to 150°C,provided no hydrous phases are present. Compositions resemblinggroup IB and IA kimberlites are produced at pressures around5–6 GPa and 10 GPa, respectively, whereas the compositionsof some other kimberlites suggest generation at higher pressuresstill. At pressures <4 GPa, an elevated geotherm producesmelilitite-like melt in the CMAS–CO₂ system rather thankimberlite. Even when a relatively CO₂-rich mantle compositioncontaining 0·15 wt % CO₂ is assumed, kimberlites andmelilitites are produced by <1% melting and carbonatitesare generated by even smaller degrees of melting of <0·5%. KEY WORDS: carbonatite; CO₂; kimberlite; melilitite; melt generation     

Origin of Exceptionally Abundant Phonolites on Ua Pou Island (Marquesas, French Polynesia): Partial Melting of Basanites Followed by Crustal Contamination

On the basis of the first systematic mapping of Ua Pou, longknown for its exceptionally abundant phonolites, we estimatethat these rocks cover 65% of the surface of the island whereasmafic lavas cover 27% and intermediate ones 8%. The silica-undersaturatedsuite was erupted in a restricted time span (2·9–2·35Myr), following the emplacement of tholeiites derived from ayoung HIMU-type source at c. 4 Ma. Primitive basanites, derivedfrom a heterogeneous mantle source with a dominant EM II + HIMUsignature, represent likely parental magmas. The series is characterizedby a Daly gap defined by a lack of phonotephrites. We considerthat the most likely model for the origin of evolved lavas ispartial melting at depth of primitive basanites, leaving anamphibole-rich residuum and producing tephriphonolitic magmas.These tephriphonolitic magmas may have evolved by closed-systemfractional crystallization towards Group A phonolites. Threeother groups of phonolites could have been derived from tephriphonoliticmagmas by open-system fractional crystallization processes,characterized respectively by seawater contamination (GroupB), assimilation of nepheline syenite-type materials (GroupC) and extreme fractionation coupled with assimilation of theunderlying oceanic crust (Group D). The prominence of evolvedlavas is a consequence of their origin from partial meltingof mafic precursors followed by crustal contamination. KEY WORDS: Marquesas; French Polynesia; phonolite; partial melting; contamination     

Groundwater control of mangrove surface elevation: Shrink and swell varies with soil depth

We measured monthly soil surface elevation change and determined its relationship to groundwater changes at a mangrove forest site along Shark River, Everglades National Park, Florida. We combined the use of an original design, surface elevation table with new rod-surface elevation tables to separately track changes in the mid zone (0–4 m), the shallow root zone (0–0.35 m), and the full sediment profile (0–6 m) in response to site hydrology (daily river stage and daily groundwater piezometric pressure). We calculated expansion and contraction for each of the four constituent soil zones (surface [accretion and erosion; above 0 m], shallow zone [0–0.35 m], middle zone [0.35–4 m], and bottom zone [4–6]) that comprise the entire soil column. Changes in groundwater pressure correlated strongly, with changes in soil elevation for the entire profile (Adjusted R² = 0.90); this relationship was not proportional to the depth of the soil profile sampled. The change in thickness of the bottom soil zone accounted for the majority (R² = 0.63) of the entire soil profile expansion and contraction. The influence of hydrology on specific soil zones and absolute elevation change must be considered when evaluating the effect of disturbances, sea level rise, and water management decisions on coastal wetland systems.     

Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.