The ionospheric eclipse factor method (IEFM) and its application to determining the ionospheric delay for GPS

A new method for modeling the ionospheric delay using global positioning system (GPS) data is proposed, called the ionospheric eclipse factor method (IEFM). It is based on establishing a concept referred to as the ionospheric eclipse factor (IEF) λ of the ionospheric pierce point (IPP) and the IEF’s influence factor (IFF) . The IEF can be used to make a relatively precise distinction between ionospheric daytime and nighttime, whereas the IFF is advantageous for describing the IEF’s variations with day, month, season and year, associated with seasonal variations of total electron content (TEC) of the ionosphere. By combining λ and with the local time t of IPP, the IEFM has the ability to precisely distinguish between ionospheric daytime and nighttime, as well as efficiently combine them during different seasons or months over a year at the IPP. The IEFM-based ionospheric delay estimates are validated by combining an absolute positioning mode with several ionospheric delay correction models or algorithms, using GPS data at an international Global Navigation Satellite System (GNSS) service (IGS) station (WTZR). Our results indicate that the IEFM may further improve ionospheric delay modeling using GPS data.     

Atmospheric Artifact Compensation in Ground-Based DInSAR Applications

In this letter, a coherence-based technique for atmospheric artifact removal in ground-based (GB) zero-baseline synthetic aperture radar (SAR) acquisitions is proposed. For this purpose, polarimetric measurements acquired using the GB-SAR sensor developed at the Universitat Politecnica de Catalunya are employed. The heterogeneous environment of Collserola Park in the outskirts of Barcelona, Spain, was selected as the test area. Data sets were acquired at X-band during one week in June 2005. The effects of the atmosphere variations between successive zero-baseline SAR polarimetric acquisitions are treated here in detail. The need to compensate for the resulting phase-difference errors when retrieving interferometric information is put forward. A compensation technique is then proposed and evaluated using the control points placed inside the observed scene.     

Investigation of the stable isotope fractionation in speleothems with laboratory experiments

Many speleothems show evidence for calcite precipitation under disequilibrium conditions. To improve the understanding of these kinetic processes, several laboratory experiments were performed to study the fractionation of stable oxygen and carbon isotopes during the precipitation of calcite. Carbonate was precipitated under controlled conditions from both a body of standing water (beaker experiments) and a solution flowing along a channel (channel experiments) at a relative humidity of 100%. Slow degassing of CO₂, simulated by the beaker experiments, results in δ¹⁸O values in equilibrium with the solution. In contrast, the δ¹³C values show a significant enrichment, inversely proportional to the height of the solution in the beakers. Fast degassing of CO₂, simulated by the channel experiments, showed an enrichment of both δ¹³C and δ¹⁸O and a slope of Δδ¹³C/Δδ¹⁸O of 1.4±0.6. These results represent experimental evidence for the Hendy effect, which is manifested in (i) a progressive increase in δ¹⁸O and δ¹³C away from the growth axis and (ii) a positive correlation between δ¹⁸O and δ¹³C along a single growth layer of a stalagmite.     

Comparison of dissolved and particulate arsenic distributions in shallow aquifers of Chakdaha, India, and Araihazar, Bangladesh

Background  

The origin of the spatial variability of dissolved As concentrations in shallow aquifers of the Bengal Basin remains poorly understood. To address this, we compare here transects of simultaneously-collected groundwater and aquifer solids perpendicular to the banks of the Hooghly River in Chakdaha, India, and the Old Brahmaputra River in Araihazar, Bangladesh.     

华北克拉通东南缘约1.8 Ga高压麻粒岩相变质作用:岩石学和锆石U-Pb年代学证据

华北克拉通北邻中亚造山带,南接秦岭-大别-苏鲁造山带.它通常被认为是约18亿年固结形成的陆块.其基底的形成与演化,一直受到广泛关注(Zhao et al.,1998,2000,2005;Zhai et al.,2000,2005;Wilde et al.,2002,2005;Guo et al.,2005;Kroner et al.,2005,2006;Lu et al.,2008).大多数研究者都注重于华北克拉通内部、北部和东西陆块结合带(中间带),较少关注东南缘基底的形成与演化研究.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Numerical simulation of a stratigraphic model

A multi-lithology diffusive stratigraphic model is considered, which simulates at large scales in space and time the infill of sedimentary basins governed by the interaction between tectonics displacements, eustatic variations, sediment supply, and sediment transport laws. The model accounts for the mass conservation of each sediment lithology resulting in a mixed parabolic, hyperbolic system of partial differential equations (PDEs) for the lithology concentrations and the sediment thickness. It also takes into account a limit on the rock alteration velocity modeled as a unilaterality constraint. To obtain a robust, fast, and accurate simulation, fully and semi-implicit finite volume discre tization schemes are derived for which the existence of stable solutions is proved. Then, the set of nonlinear equations is solved using a Newton algorithm adapted to the unilaterality constraint, and preconditioning strategies are defined for the solution of the linear system at each Newton iteration. They are based on an algebraic approximate decoupling of the sediment thickness and the concentration variables as well as on a proper preconditioning of each variable. These algorithms are studied and compared in terms of robustness, scalability, and efficiency on two real basin test cases.     

Contributions of boron isotopes to understanding the hydrogeochemistry of the coastal detritic aquifer of Castellón Plain,Spain

The Castellón Plain alluvial aquifer, Spain, is intensively exploited to meet the demand for agricultural irrigation and industrial water supply. The geochemistry of its groundwater shows complex salinization in the northern and southern parts of the aquifer, with significant pollution from human origin in the central portion. Boron content and B isotope geochemistry are useful for distinguishing between various sources of pollution and their relative importance in different parts of this aquifer. Boron concentrations in the groundwater vary between 0.01 and 0.85 mg/L. In the more saline groundwaters, found at the northern and southern ends of the study area, the presence of B is linked to inputs from seawater and water with a calcium-magnesium sulphate facies, which feed the aquifer and clearly influence the chemistry of its waters. Evidence of B adsorption processes in some samples is shown by the low B/Cl ratios and the high values of δ¹¹B. In the central portion of the aquifer, the high B/Cl ratios and the strongly negative δ¹¹B are related to pollution of human origin.     

Hydrogeochemistry and isotope analyses used to determine groundwater recharge and flow in low-gradient catchments of the province of Buenos Aires,Argentina

The region known as Pampa Plain, in Argentina, is a vast area characterized by slopes of less than 0.05%. The surface sediment is silty sand, mainly Aeolian, referred to as Pampean Loess, which is a phreatic aquifer unit of utmost importance for the water supply of the region. On account of the slight gradient, hydrogeological analyses using only hydraulic measurements are difficult to perform, often leading to confusing results. Thus, the study presented relies on hydrochemical modeling and isotopic determinations as well. The study area comprises three catchments in the inter-mountainous area corresponding to El Moro, Tamangueyú and Seco creeks, and covering 2,570 km² in the province of Buenos Aires. Measurements of piezometric levels and samples of groundwater, surface water and rainwater were carried out between January and March 2005. Major ion results were analyzed by means of hydrochemical graphs and hydrogeochemical modelling using NETPATH. The resulting data show that it is possible to identify local changes in recharge, flow direction and stream/groundwater relationship by using hydrochemical and isotopic information, which may become a useful and more precise tool for the study of particularly flat landscapes.