The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.     

Wavelet analysis of bathymetric sidescan sonar data for the classification of seafloor sediments in Hopvågen Bay - Norway

In this paper we examine the use of bathymetric sidescan sonar for automatic classification of seabed sediments. Bathymetric sidescan sonar, here implemented through a small receiver array, retains the advantage of sidescan in speed through illuminating large swaths, but also enables the data gathered to be located spatially. The spatial location allows the image intensity to be corrected for depth and insonification angle, thus improving the use of the sonar for identifying changes in seafloor sediment. In this paper we investigate automatic tools for seabed recognition, using wavelets to analyse the image of Hopvågen Bay in Norway. We use the back-propagation elimination algorithm to determine the most significant wavelet features for discrimination. We show that the features selected present good agreement with the grab sample results in the survey under study and can be used in a classifier to discriminate between different seabed sediments.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Beginning integrated coastal management efforts in Madagascar

Integrated coastal management (ICM) is an emerging approach in East Africa for the solution of various coastal issues. This paper is intended to provide an update on the current practical aspects concerning the ICM process and related policies and strategies in Madagascar. Efforts are being made in Madagascar for the mutual integration of numerous coastal projects and activities within the Environment Program of the National Environmental Action Plan. The foundations for an ICM program, built during an ICM workshop, which took place at the end of 1996 upon existing activities, are being expanded presently. These developments concern, above all, the institutional aspects related to the formulation of an ICM program. Therefore, the actual situation sees an overgrowing collaboration of the national and international agencies involved in the implementation of coastal projects, in an expandingly integrating way, within an institutional framework that grows progressively stronger. The case of Madagascar suggests reflections on how ICM can mitigate potential sectoral conflicts as well as on, how the sometimes complex nature of the social and cultural issues may influence the development of an ICM program. The need for monitoring ICM is stressed and the role of outside partners clarified.     

Acute and chronic toxicity of the rice herbicides thiobencarb and molinate to opossum shrimp (Neomysis mercedis)

Neomysis mercedis were exposed to the rice herbicides molinate and thiobencarb, which have been detected in the Sacramento-San Joaquin Delta. Continuous-flow acute and chronic toxicity studies were performed. For thiobencarb, the 4-, 7- and 14-day LC_sos were 304, 214 and 91 μg/liter, respectively. For molinate, these values were 9910, 2530, and 820 μg/liter, respectively. Mortality stabilized after 18 and 28 days exposure, respectively, for thiobencarb and molinate. The incipient lethal concentrations were 53 and 230 μg/liter, respectively. Joint toxicity studies indicated additive toxicity for the two chemicals. Chronic no observable effects concentrations (NOECs) were estimated at 3·2 and 25·6 μg/liter for thiobencarb and molinate, with measurable effects occurring at 6·2 and 45·2 μg/liter, respectively. Environmental monitoring data suggests that concentrations of these chemicals in the Delta prior to 1985 may have exceeded the threshold for chronic toxicity, under conditions of joint exposure. However, due to continued improvements in pesticide management practices, environmental concentrations decreased to approximately 30 percent of the chronic threshold for joint toxicity by 1988. Baseline data on growth and reproduction relevant to toxicity tests are also presented for this species.     

Behavioural Effects of Chemically Dispersed Oil and Subsequent Recovery in Diploria strigosa (Dana)

Abstract. Survival and behaviour of the hermatypic coral Diploria strigosa was studied during 6–24 h doses with water-accomodated fractions of chemically dispersed crude oil, and for a subsequent recovery period of 1 month. Experiments utilized a flow-through laboratory dosing procedure and incorporated petroleum hydrocarbon measurements in order to simulate a major but short-term oil spill in shallow subtidal benthic reef environments. Chemically dispersed oil treatments consisted of Arabian Light Crude oil with Corexit 9527 or BP1100WD at 1–20 ppm concentrations of oil.
In general, effects observed were sub-lethal, temporary, and associated with the highest concentrations tested. Responses to the presence of dispersed oil at 20ppm for 24 h included mesenterial filament extrusion, extreme tissue contraction, tentacle retraction and localized tissue rupture. The nature and severity of reactions during the dosing phase varied between colonies and treatments, but colonies typically resumed normal behaviour within 2 h to 4 d of the recovery period. It therefore seems unlikely that observed biological effects would impair long-term viability.     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Sediment transport pattern at the Barra Nova inlet, south Portugal: a conceptual model

The Barra Nova inlet, in south Portugal, is known to migrate progressively southeastwards under wave action. The morphodynamics of this system during a representative year suggests that this long-term evolution is dependent on a seasonal behavior of the tidal inlet which can be described through a three-stage model of post-storm, transition and extended fair-weather conditions. Processes involved in this evolution indicate that the historical migration of the Barra Nova is not dependent on the longshore drift forcing constricting the channel on the updrift coast, but rather on the adjustment of the system to a major erosion of the downdrift coast during short storm events.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.