Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---

     

Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Sediment transport pattern at the Barra Nova inlet, south Portugal: a conceptual model

The Barra Nova inlet, in south Portugal, is known to migrate progressively southeastwards under wave action. The morphodynamics of this system during a representative year suggests that this long-term evolution is dependent on a seasonal behavior of the tidal inlet which can be described through a three-stage model of post-storm, transition and extended fair-weather conditions. Processes involved in this evolution indicate that the historical migration of the Barra Nova is not dependent on the longshore drift forcing constricting the channel on the updrift coast, but rather on the adjustment of the system to a major erosion of the downdrift coast during short storm events.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Seamount gravity anomaly modelling with variably thick sediment cover

Inversion modelling of marine gravity anomalies to derive predicted seafloor topography has provided significant advance in delineating deep-ocean bathymetry where the seafloor both conforms to the half-space cooling model of seafloor spreading, and largely sediment-free. Similar modelling for elevated ridges and seamounts, that are formed by processes other than seafloor spreading and/or have proximal sediment sources (e.g., continental margins and volcanic arcs), have significantly higher errors when validated against modern shipborne echo-sounding data. A three-dimensional, five-layer gravity model is emulated for the cases of both synthetic and real seamounts, with varying degrees of sediment burial, to establish the sensitivity of variable sediment cover as a source of error. A simple `Gaussian' seamount with base radius of 30 km, 2000 m of relief, has a maximum 140–160 mGal anomaly, that decreases to 50 mGal with the addition of 1 km of sediment cover with simple `flood' geometry. Complete burial, with a typical sediment density of 2300 kg m^–3, results in a 120 mGal difference from a sediment-free seamount model. Increasing sediment density results in an exponential decay of the seamount anomaly. More complex synthetic geometries of varying basement relief and sediment thickness show that the anomaly amplitude remains significant, especially where the latter is >700–800 m thick. For the real case, seamounts of the Three Kings Ridge (northern New Zealand) imaged with seismic reflection data, with varying degrees of sediment cover of up to 1 km, when modelled both with and with-out the inclusion of a sediment layer, typically have rms differences of 30 mGal between observed and modelled gravity anomalies. Significantly, the rms errors are reduced by 50% with the inclusion of a sediment layer that corresponds to a reduction of predicted seafloor topography rms errors of 192–684 m to 78–360 m.     

鲫鱼(Carassius auratus)在微冻保鲜过程中的质量变化

该文研究鲫鱼 ( Carassius auratus)在微冻 ( - 3℃ )保鲜过程中的质量变化规律。以感官评价、细菌总数、T- VBN值、p H值、ATPase活性、K值等作为质量指标。实验结果表明 ,微冻可以明显抑制细菌总数的增长 ,维持较低的 T- VBN和 K值。但是 ,微冻条件下鲫鱼的 ATPase活性下降速度较快