Application of Air Decks in Production Blasting to Improve Fragmentation and Economics of an Open Pit Mine

In blasting with air decks, repeated oscillation of shock waves within the air gap increases the time over which it acts on the surrounding rock mass by a factor at between 2 and 5. The ultimate effect lies in increasing the crack network in the surrounding rock and reducing the burden movement. Trials of air deck blasting in the structurally unfavourable footwall side of an open pit manganese mine has resulted in substantial improvements in fragmentation and blast economics. Better fragmentation resulted in improved shovel loading efficiency by 50–60%. Secondary blasting was almost eliminated. Use of ANFO explosive with this technique reduced explosive cost by 31.6%. Other benefits included reductions in overbreak, throw and ground vibration of the order of 60–70, 65–85 and 44% respectively. This paper reviews the theory of air deck blasting and describes in detail the air deck blast trials conducted in a manganese open pit mine in India. The blast performance data have been analysed to evaluate the benefits of air decking over conventional blasting.     

Richtmyer-Meshkov Experiments on the Omega Laser

Observations of the interstellar medium reveal a dynamic realm permeated by shocks. These shocks are generated on a large range of scales by galactic rotation, supernovae, stellar winds, and other processes. Whenever a shock encounters a density interface, Richtmyer-Meshkov instabilities may develop. Perturbations along the interface grow, leading to structure formation and material mixing. An understanding of the evolution of Richtmyer-Meshkov instabilities is essential for understanding galactic structure, molecular cloud morphology, and the early stages of star formation. An ongoing experimental campaign studies Richtmyer-Meshkov mixing in a convergent, compressible, miscible plasma at the Omega laser facility. Cylindrical targets, consisting of a low density foam core and an aluminum shell covered by an epoxy ablator, are directly driven by fifty laser beams. The aluminum shell is machined to produce different perturbation spectra. Surface types include unperturbed (smooth), single-mode sinusoids, multi-mode (rough), and multi-mode with particular modes accentuated (specified-rough). Experimental results are compared to theory and numerical simulations.     

The macroinfauna of the Galician sandy beaches (NW Spain) affected by the Prestige oil-spill

Eighteen sandy beaches were sampled along the 1659 km of the Galician coast (NW Spain) six months after the Prestige oil-spill to study the impact of the fuel and the clean-up activities on the macroinfauna community. A transect was extended at each beach, from above the drift line to below the swash line at five sampled levels; at each level six 0.05 m2 replicates were taken to a depth of 30 cm and sieved through a 1mm mesh, and the organisms collected and preserved. Results were compared with previous data obtained using the same procedures. The macroinfauna was numerically dominated by the amphipod Pontocrates arenarius, the isopod genus Eurydice, the polychaete Scolelepis squamata, and the amphipod Talitrus saltator. As a result of the Prestige oil-spill and the clean-up activities, beach populations were reduced, with Eurydice and S. squamata as the most affected taxa.     

Seasonally and spatially referenced estimates of recreational shore-angling effort,catch composition,catch rates and total catch in the Goukamma Marine Protected Area,South Africa

A roving creel survey of the recreational shore fishery along the 16.4-km coastline in the Goukamma Marine Protected Area on the south coast of South Africa was conducted from 2009 to 2011. Some 838 patrols were stratified equally among months, areas and years, but intentionally biased towards weekends. Angler densities at Buffalo Bay and Groenvlei were 0.59 and 0.28 anglers km?1, respectively. Weekend densities were double to quadruple weekday densities and fishing during winter was more popular than during summer. Area, habitat and distance to access points explained variation in angler densities. Shannon–Wiener diversity in catches declined from 2.18 in an earlier (1993–2002) survey to 1.79. Although the order of species abundance in the catches remained largely unchanged, blacktail Diplodus capensis dominance increased to 57.3% by number, at the expense of galjoen Dichistius capensis. Habitat explained 27% of the variance in catch composition. The catch per unit effort (CPUE) for the top nine species ranged from 0.19 to 6.35 fish 100-h?1. The CPUE of all species, except spotted grunter Pomadasys commersonnii, declined. Blacktail and galjoen CPUE declined by 17% and 77%, respectively. The total catch estimate was 2 986 fish y?1. Transgressions of size limits were common. The results suggest that the fishery is overexploited and that catch rates are declining.     

In situ formation of welded tuff-like textures in the carapace of a voluminous silicic lava flow,Owyhee County,SW Idaho

 The Badlands rhyolite, on the Owyhee Plateau of southwestern Idaho, can be demonstrated to be a large lava flow on the basis of its geometry of large and small flow lobes, its well-exposed near-vent features, and its response to pre-existing topography. However, samples of the dense upper vitrophyre of the unit reveal a range of annealed fragmental textures, including material which closely resembles the compressed, welded glass shards which are characteristic of ignimbrites. Formation of these tuff-like textures involved processes probably common to emplacement of most silicic lava flow units. Decompression upon extrusion causes inflation of pumice at the surface of the lava flow; some of this pumice is subsequently comminuted, producing loose bubble-wall shards, bits of pumice, chips of dense glass, and fragments of phenocrysts. This debris sifts down around loose blocks and into open fractures deeper in the flow, where it can be reheated, compressed, and annealed to varying degrees. The end result is a dense vitrophyre layer (beneath the true upper, non-welded carapace breccia) which can be extremely texturally heterogeneous, with areas of flow-foliated lava occurring very near lava which in many aspects looks like welded ignimbrite, complete with flattened pumices. Identical textures in other silicic units have been cited by previous workers as evidence that those units erupted as pyroclastic flows which then underwent sufficient rheomorphism to create a flow-foliated rock which otherwise appears to be lava. The textures described herein indicate that lava flows can come to mimic rheomorphic ignimbrites, at least at scales ranging from thin sections to outcrops. Voluminous silicic units with scattered fragmental textures, but with otherwise lava-like features, are probably true effusive lava flows. Received: January 30, 1995 / Accepted: January 22, 1996     

RECOGNISING THE UNCERTAINTY IN THE QUANTIFICATION OF THE EFFECTS OF CLIMATE CHANGE ON HYDROLOGICAL RESPONSE

A widely used method of evaluating effects of climate change on flow regime is to perturb the climate inputs to a rainfall–runoff model and examine the effect on a statistic of the modelled flows. Such studies require four elements: a method of perturbing the climate, a rainfall–runoff model, a study catchment and a flow index. In practice the direction and magnitude of the estimated effects depend on each of the four elements, leading to concern over the usefulness and generality of the results. To investigate these uncertainties two climate scenarios and eight climate sensitivity tests have been applied to three UK catchments using two conceptual rainfall–runoff models in order to quantify effects of climate change on three flow indices representing mean runoff, flood magnitudes and low flows. The sensitivity tests were found to be useful to assess the suitability of the models to simulate flows outside the conditions experienced in their calibration. Both models gave internally consistent results but, on close examination, one model was found inappropriate for this application. Results show that the effect of climate change on flow varies between catchments and that different flow response indices can change in opposite directions, e.g. floods increased in magnitude while low flows reduced. Contrasting results were obtained from the two climate scenarios.     

Photometric monitoring of 2060 Chiron''s brightness at perihelion

The results of photometric and spectroscopic observations of comet/asteroid 2060 Chiron carried on at the Observatório do Pico-dos-Dias (Brazil), at the European Southern Observatory (Chile) and at the Mauna Kea Observatory (Hawaii) during 1996 are presented. The analysis of the photometric data shows that even at a minimum of brightness 2060 Chiron presents some activity. The absolute magnitude, H_v, varied from 6.79 in February to 6.22 in March. Therefore 2060 Chiron is still in a minimum of activity close to that of 1983–1985 and of 1994–1995.     

Chemical and mineralogical characterization of the Mineo (Sicily,Italy) pallasite: A unique sample

The Mineo pallasite is characterized here for the first time. The only 42 g still available worldwide is part of the collection of the Department of Physics and Geology, University of Perugia. A multianalytical approach was used, joining field-emission scanning electron microscopy, Raman analysis, X-ray powder diffraction, electron-probe microanalysis, and laser ablation inductively coupled plasma mass spectrometry. Results highlighted that (1) the Mineo pallasite belongs to the Main Group pallasites; (2) the silicate component is essentially olivine, with no pyroxene component; (3) the olivine chemical composition varies in terms of both iron and trace elements; (4) the metal phase is essentially kamacite with the taenite mainly found in the plessite structure; (5) phosphide phases are present as schreibersite and barringerite. The observed compositional variability in olivines as well as their occurrence as both angular and rounded crystals suggest that the Mineo pallasite could have been derived from a large impact of a differentiated parent body with a larger solid body. The resulting pallasite conglomerate consists of the compositionally different olivines, likely coming from different areas of the same differentiated parent body, and the residual molten Fe-Ni.