前陆褶皱冲断带厚皮缩短盐构造运动的物理模拟

尺度物理实验用干石英砂和聚合硅树脂为实验材料,模拟了前陆褶皱冲断带厚皮缩短盐构造,并与薄皮缩短盐构造及无盐层的褶皱冲断带构造模型进行了对比。实验表明,由于塑性盐层的存在,厚皮缩短盐构造呈3层式结构模式。盐上层主要形成敞开褶皱、箱状褶皱、前冲和背冲断层以及冲垒构造,盐下层形成逆冲断层及冲垒构造,断层通常都终止于盐层中。尽管盐层局部变薄或增厚,但不形成刺穿型盐构造。褶皱冲断带不具构造指向特征,其楔形库仑锥剖面呈平台与斜坡两段式形态。模型对比表明,厚皮缩短与薄皮缩短所产生的盐上层构造形态相似,不易区分;但二者的库仑锥剖面有所不同。厚皮前陆褶皱冲断盐构造与无盐层的褶皱冲断构造无论是其几何形态、还是库仑锥剖面都有极大的差别,极易区分：实验结果对解释前陆褶皱冲断构造和寻找盐下油气圈闭都有着重要的指导意义。     

Frequency‐dependent multi‐offset phase analysis of surface waves: an example of high‐resolution characterization of a riparian aquifer

Multi‐offset phase analysis of seismic surface waves is an established technique for the extraction of dispersion curves with high spatial resolution and, consequently, for the investigation of the subsurface in terms of shear wave velocity distribution. However, field applications are rarely documented in the published literature. In this paper, we discuss an implementation of the multi‐offset phase analysis consisting of the estimation of the Rayleigh wave velocity by means of a moving window with a frequency‐dependent length. This allows maximizing the lateral resolution at high frequencies while warranting stability at the lower frequencies. In this way, we can retrieve the shallow lateral variability with high accuracy and, at the same time, obtain a robust surface‐wave velocity measurement at depth. In this paper, we apply this methodology to a dataset collected for hydrogeophysical purposes and compare the inversion results with those obtained by using refraction seismics and electrical resistivity tomography. The surface‐wave results are in good agreement with those provided by the other methods and demonstrate a superior capability in retrieving both lateral and vertical velocity variations, including inversions. Our results are further corroborated by the lithological information from a borehole drilled on the acquisition line. The availability of multi‐offset phase analysis data also allows disentangling a fairly complex interpretation of the other geophysical results.     

Contrasting weathering and climate regimes in forested and cleared sandstone temples of the Angkor region

Comparative assessment of stone weathering intensities and bioclimatic conditions was conducted at four temples located in cleared and forested sites of the Angkor Park, based on similar protocols. Four thousand sculpted lotus petals carved in the same grey sandstone were categorized by using two customized scales of weathering intensity, and climate monitoring was conducted from December 2008 to November 2009. Whereas 70% of the sandstone lotus petals are almost completely destroyed by mechanical weathering in cleared areas, 74% of petals located in forested environments appear to be totally free of mechanical weathering and are only affected by superficial biochemical weathering. Ambient conditions are also contrasting, with the magnitude of the diurnal surface temperature and relative humidity ranges being three times higher at cleared sites than in wooded areas. As wetting–drying cycles are the driving force of sandstone decay at Angkor, causal links are suggested between weathering and climate regimes. In wooded areas, the microclimate is buffered by the forest and the associated lithobionts, which maintain constant humidity levels, reduce thermal stresses at the stone surface and induce a slow biochemical weathering regime. In cleared areas, direct exposure to sunshine and monsoon rains induces pronounced wetting–drying cycles conducive to swelling–shrinking movements and other potential processes, provoking the rapid mechanical decay of the sandstone. Even if local damage can be caused by tree roots, the forest cover and the associated lithobionts obviously play an overall protective role. Additionally, microtopographical factors related to architectural designs and post‐building events probably explain intra‐site and between site minor differences in the amount of sandstone decay, by influencing key factors such as the water residence time at the stone surface. Last, the contrasting weathering regimes in forested and cleared sites are but a trend, for besides overwhelming mechanical weathering, chemical weathering is also operative at cleared sites, as indicated by salt efflorescences and ferric oxidation. Copyright © 2012 John Wiley & Sons, Ltd.     

Sediment export from French rivers to the sea

Knowledge of sediment exports from continental areas is essential for estimating denudation rates and biogeochemical cycles. However, the estimation of current sediment fluxes to the sea is often limited by the availability and quality of sediment discharge data. This study aims to quantify the relative contributions of French rivers to the sediment discharge to the ocean. Sediment fluxes were assessed using the French river quality database, which is characterized by a low temporal resolution but long‐term measurement periods. An improved rating curve approach (IRCA) using daily discharge data, which allows the estimation of mean annual sediment loads from infrequent sediment concentration data, was used to calculate sediment fluxes. The resulting mean annual sediment loads show that French rivers export c. 16.21 Mt yr^‐1 of sediments to the sea. Among the 88 defined French rivers flowing to the sea, the four largest basins (Loire, Rhone, Garonne and Seine) export 13.2 Mt yr^‐1, which corresponds to 81.3% of total exports. No relationship was found between the mass of exported sediment and the size of the drainage basins. This is due to the variety of river basin typologies among these rivers, including lowland rivers in temperate climates, such as the Seine on the one hand and rivers draining mountainous areas in Alpine/Mediterranean areas on the other hand, such as the Rhone. The latter contributes 60% to the total sediment export for France while its drainage area is only 19% of the total area considered. Differences between the river basins considered are also shown by temporal indicators describing the duration of the exports, which may be linked with sediment production processes over drained areas. Copyright © 2012 John Wiley & Sons, Ltd.     

Cs baseline levels in the Mediterranean and Black Sea: A cross-basin survey of the CIESM Mediterranean Mussel Watch programme

The common mussel Mytilus galloprovincialis was selected as unique biomonitor species to implement a regional monitoring programme, the CIESM Mediterranean Mussel Watch (MMW), in the Mediterranean and Black Seas. As of today, and upon standardization of the methodological approach, the MMW Network has been able to quantify ¹³⁷Cs levels in mussels from 60 coastal stations and to produce the first distribution map of this artificial radionuclide at the scale of the entire Mediterranean and Black Seas. While measured ¹³⁷Cs levels were found to be very low (usually <1 Bq kg⁻¹ wet wt) ¹³⁷Cs activity concentrations in the Black Sea and North Aegean Sea were up to two orders of magnitude higher than those in the western Mediterranean Basin. Such effects, far from representing a threat to human populations or the environment, reflect a persistent signature of the Chernobyl fallout in this area.     

Daily hydrological modeling in the Amazon basin using TRMM rainfall estimates

Rainfall measurements by conventional raingauges provide relatively accurate estimates at a few points of a region. The actual rainfield can be approximated by interpolating the available raingauge data to the remaining of the area of interest. In places with relatively low gauge density such interpolated rainfields will be very rough estimates of the actual events. This is especially true for tropical regions where most rainfall has a convective origin with high spatial variability at the daily level. Estimates of rainfall by remote sensing can be very useful in regions such as the Amazon basin, where raingauge density is very low and rainfall highly variable. This paper evaluates the rainfall estimates of the Tropical Rainfall Measuring Mission (TRMM) satellite over the Tapajós river basin, a major tributary of the Amazon. Three-hour TRMM rainfall estimates were aggregated to daily values and were compared with catch of ground-level precipitation gauges on a daily basis after interpolating both data to a regular grid. Both daily TRMM and raingauge-interpolated rainfields were then used as input to a large-scale hydrological model for the whole basin; the calculated hydrographs were then compared to observations at several streamgauges along the river Tapajos and its main tributaries. Results of the rainfield comparisons showed that satellite estimates can be a practical tool for identifying damaged or aberrant raingauges at a basin-wide scale. Results of the hydrological modeling showed that TRMM-based calculated hydrographs are comparable with those obtained using raingauge data.     

Rates of generation and growth of the continental crust

Models for when and how the continental crust was formed are constrained by estimates in the rates o crustal growth. The record of events preserved in the continental crust is heterogeneous in time with distinctive peaks and troughs of ages for igneous crystallisation, metamorphism, continental margin and mineralisation. For the most part these are global signatures, and the peaks of ages tend to b associated with periods of increased reworking of pre-existing crust, reflected in the Hf isotope ratios o zircons and their elevated oxygen isotope ratios. Increased crustal reworking is attributed to periods o crustal thickening associated with compressional tectonics and the development of supercontinents Magma types similar to those from recent within-plate and subduction related settings appear to hav been generated in different areas at broadly similar times before ~3.0 Ga. It can be difficult to put th results of such detailed case studies into a more global context, but one approach is to consider when plate tectonics became the dominant mechanism involved in the generation of juvenile continental crust The development of crustal growth models for the continental crust are discussed, and a number o models based on different data sets indicate that 65%-70% of the present volume of the continental crus was generated by 3 Ga. Such estimates may represent minimum values, but since ~3 Ga there has been reduction in the rates of growth of the continental crust. This reduction is linked to an increase in th rates at which continental crust is recycled back into the mantle, and not to a reduction in the rates a which continental crust was generated. Plate tectonics results in both the generation of new crust and it destruction along destructive plate margins. Thus, the reduction in the rate of continental crustal growth at ~3 Ga is taken to reflect the period in which plate tectonics became the dominant mechanism b which new continental crust was generated.     

Automatic correction and simplification of geological maps and cross-sections for numerical simulations

Incorporating prior geological knowledge in geophysical process models often meets practical meshing challenges and raises the question of how much detail is to be included in the geometric model. We introduce a strategy to automatically repair and simplify geological maps, geological cross-sections and the associated meshes while preserving elementary consistency rules. To identify features breaking validity and/or the thin features potentially problematic when generating a mesh, we associate an exclusion zone with each model feature (horizon, fault). When these zones overlap, both the connectivity and the geometry of the geological layers are automatically modified. The output model enforces specific practical quality criteria on the model topology and geometry that facilitates the generation of a mesh with lower bounds on minimum angles and minimum local entity sizes. Our strategy is demonstrated on an invalid geological cross-section from a real-case study in the Lorraine coal basin. We further explore the impacts of the model modifications on wave propagation simulation. We show that the differences on the seismograms due to model simplifications are relatively small if the magnitude of simplifications is adapted to the physical problem parameters.     

Titanite: A potential solidus barometer for granitic magma systems

Constraining crystallization pressure and thus intrusion depth of granites in various geodynamic settings remains challenging, yet important to further our understanding of magma system and crustal evolution. We propose that titanite, which is a common accessory in metaluminous and weakly peraluminous granites, can be used as a barometer if it crystallized in magmatic, near-solidus conditions and in equilibrium with amphibole, plagioclase, K-feldspar, quartz, biotite, and magnetite ± ilmenite. Titanite Al₂O₃ increases with pressure (P) according to: P (in MPa) = 101.66 × Al₂O₃ in titanite (in wt%) + 59.013 (R² = 0.83) with estimated uncertainties of ~±60 to ~±100 MPa for crystallization between ~150 and 400 MPa. We highlight that the current calibration dataset is limited, and that systematic experimental studies are needed to rigorously quantify the relation. The most important use of this empirical barometer will be for rocks in which amphibole is present but significantly altered, or in combination with amphibole barometry, as titanite can be easily dated by LA-ICP-MS.