The behavior of apatite during crustal anatexis: Equilibrium and kinetic considerations

The solubility and dissolution kinetics of apatite in felsic melts at 850°–1500°C have been examined experimentally by allowing apatite crystals to partially dissolve into apatite-undersaturated melts containing 0–10 wt% water. Analysis of P and Ca gradients in the crystal/melt interfacial region enables determination of both the diffusivities and the saturation levels of these components in the melt. Phosphorus diffusion was identified as the rate-limiting factor in apatite dissolution. Results of four experiments at 8 kbar run in the virtual absence of water yield an activation energy (E) for P diffusion of 143.6 ± 2.8 kcal-mol^?1 and frequency factor (D₀) of 2.23^+2.88_?1.26 × 10⁹cm²-sec^?1. The addition of water causes dramatic and systematic reduction of both E and D₀ such that at 6 wt% H₂O the values are ~25 kcal-mol^?1 and 10^?5 cm²-sec^?1, respectively. At 1300°C, the diffusivity of P increases by a factor of 50 over the first 2% of water added to the melt, but rises by a factor of only two between 2 and 6%, perhaps reflecting the effect of a concentration-dependent mechanism of H₂O solution. Calcium diffusion gradients do not conform well to simple diffusion theory because the release of calcium at the dissolving crystal surface is linked to the transport rate of phosphorus in the melt, which is typically two orders of magnitude slower than Ca. Calcium chemical diffusion rates calculated from the observed gradients are about 50 times slower than calcium tracer diffusion.Apatite solubilities obtained from these experiments, together with previous results, can be described as a function of absolute temperature (T) and melt composition by the expression: In D^apatite/melt_P = [(8400 + ((SiO₂ ? 0.5)2.64 × 10⁴))/T] ? [3.1 + (12.4(SiO₂ ? 0.5))] where SiO₂ is the weight fraction of silica in the melt. This model appears to be valid between 45% and 75% SiO₂, 0 and 10% water, and for the range of pressures expected in the crust.The diffusivity information extracted from the experiments can be directly applied to several problems of geochemical interest, including I) dissolution times for apatite during crustal anatexis, and 2) pileup of P, and consequent local saturation in apatite, at the surfaces of growing major-mineral phases.     

Alpha thermochronology of carbonates

Step-heating experiments on 17 calcites from 11 different samples and 6 dolomites from 5 samples suggest a closure temperature of He in carbonates ∼70 ± 10 °C for a cooling rate of 10 °C/m.y. The bulk closure temperature in some samples may tend slightly higher due to the presence of diffusion domains larger (and therefore more retentive) than the sites in which the majority of He resides. The diffusivity of He in calcite is independent of the genesis of the mineral (igneous, sedimentary, metamorphic) or the source of the He (radiogenic, common, or laboratory induced) and in all samples analyzed the effective diffusion dimension for He is smaller than the size of the crystals investigated. Although calcite is a low-U mineral, this shortcoming can be overcome by analyzing large samples (>2 mm diameter) provided samples have a minimum of ∼0.3 ppm U; samples with smaller concentrations of alpha-producers are unlikely to produce enough radiogenic ⁴He sufficient to overwhelm He present in the crystals at the time they passed through their closure temperature.     

Deposition and preservation of fluvio-tidal shallow-marine sandstones: A re-evaluation of the Neoproterozoic Jura Quartzite (western Scotland)

The 2 to 5 km thick, sandstone-dominated (>90%) Jura Quartzite is an extreme example of a mature Neoproterozoic sandstone, previously interpreted as a tide-influenced shelf deposit and herein re-interpreted within a fluvio-tidal deltaic depositional model. Three issues are addressed: (i) evidence for the re-interpretation from tidal shelf to tidal delta; (ii) reasons for vertical facies uniformity; and (iii) sand supply mechanisms to form thick tidal-shelf sandstones. The predominant facies (compound cross-bedded, coarse-grained sandstones) represents the lower parts of metres to tens of metres high, transverse fluvio-tidal bedforms with superimposed smaller bedforms. Ubiquitous erosional surfaces, some with granule–pebble lags, record erosion of the upper parts of those bedforms. There was selective preservation of the higher energy, topographically-lower, parts of channel-bar systems. Strongly asymmetrical, bimodal, palaeocurrents are interpreted as due to associated selective preservation of fluvially-enhanced ebb tidal currents. Finer-grained facies are scarce, due largely to suspended sediment bypass. They record deposition in lower-energy environments, including channel mouth bars, between and down depositional-dip of higher energy fluvio-ebb tidal bars. The lack of wave-formed sedimentary structures and low continuity of mudstone and sandstone interbeds, support deposition in a non-shelf setting. Hence, a sand-rich, fluvial–tidal, current-dominated, largely sub-tidal, delta setting is proposed. This new interpretation avoids the problem of transporting large amounts of coarse sand to a shelf. Facies uniformity and vertical stacking are likely due to sediment oversupply and bypass rather than balanced sediment supply and subsidence rates. However, facies evidence of relative sea level changes is difficult to recognise, which is attributed to: (i) the areally extensive and polygenetic nature of the preserved facies, and (ii) a large stored sediment buffer that dampened response to relative sea-level and/or sediment supply changes. Consideration of preservation bias towards high-energy deposits may be more generally relevant, especially to thick Neoproterozoic and Lower Palaeozoic marine sandstones.     

Temporal evolution and compositional signatures of two supervolcanic systems recorded in zircons from Mangakino volcanic centre,New Zealand

Mangakino, the oldest rhyolitic caldera centre delineated in the Taupo Volcanic Zone of New Zealand, generated two very large (super-sized) ignimbrite eruptions, the 1.21 ± 0.04 Ma >500 km³ Ongatiti and ~1.0 Ma ~1,200 km³ Kidnappers events, the latter of which was followed after a short period of erosion by the ~200 km³ Rocky Hill eruption. We present U/Pb ages and trace-element analyses on zircons from pumice clasts from these three eruptions by Secondary Ion Mass Spectrometry (SIMS) using SHRIMP-RG instruments to illustrate the evolution of the respective magmatic systems. U–Pb age spectra from the Ongatiti imply growth of the magmatic system over ~250 kyr, with a peak of crystallisation around 1.32 Ma, ~100 kyr prior to eruption. The zircons are inferred to have then remained stable in a mush with little crystallisation and/or dissolution before later rejuvenation of the system at the lead-in to eruption. The paired Kidnappers and Rocky Hill eruptions have U–Pb zircon ages and geochemical signatures that suggest they were products of a common system grown over ~200 kyr. The Kidnappers and Rocky Hill samples show similar weakly bimodal age spectra, with peaks at 1.1 and 1.0 Ma, suggesting that an inherited antecrystic population was augmented by crystals grown at ages within uncertainty of the eruption age. In the Kidnappers, this younger age peak is dominantly seen in needle-shaped low U grains with aspect ratios of up to 18. In all three deposits, zircon cores show larger ranges and higher absolute concentrations of trace elements than zircon rims, consistent with zircon crystallisation from evolving melts undergoing crystal fractionation involving plagioclase and amphibole. Abundances and ratios of many trace elements frequently show variations between different sectors within single grains, even where there is no visible sector zoning in cathodoluminescence (CL) imaging. Substitution mechanisms, as reflected in the molar (Sc + Y + REE³⁺)/P ratio, differ in the same growth zone between the sides (along a-axis and b-axis: values approaching 1.0) and tips (c-axis: values between 1.5 and 5.0) of single crystals. These observations have implications for the use of zircons for tracking magmatic processes, particularly in techniques where CL zonation within crystals is not assessed and small analytical spot sizes cannot be achieved. These observations also limit applicability of the widely used Ti-in-zircon thermometer. The age spectra for the Ongatiti and Kidnappers/Rocky Hill samples indicate that both magmatic systems were newly built in the time-breaks after respective previous large eruptions from Mangakino. Trace element variations defining three-component mixing suggest that zircons, sourced from multiple melts, contributed to the population in each system.     

Deciphering petrogenic processes using Pb isotope ratios from time-series samples at Bezymianny and Klyuchevskoy volcanoes,Central Kamchatka Depression

The Klyuchevskoy group of volcanoes in the Kamchatka arc erupts compositionally diverse magmas (high-Mg basalts to dacites) over small spatial scales. New high-precision Pb isotope data from modern juvenile (1956–present) erupted products and hosted enclaves and xenoliths from Bezymianny volcano reveal that Bezymianny and Klyuchevskoy volcanoes, separated by only 9 km, undergo varying degrees of crustal processing through independent crustal columns. Lead isotope compositions of Klyuchevskoy basalts–basaltic andesites are more radiogenic than Bezymianny andesites (²⁰⁸Pb/²⁰⁴Pb = 37.850–37.903, ²⁰⁷Pb/²⁰⁴Pb = 15.468–15.480, and ²⁰⁶Pb/²⁰⁴Pb = 18.249–18.278 at Bezymianny; ²⁰⁸Pb/²⁰⁴Pb = 37.907–37.949, ²⁰⁷Pb/²⁰⁴Pb = 15.478–15.487, and ²⁰⁶Pb/²⁰⁴Pb = 18.289–18.305 at Klyuchevskoy). A mid-crustal xenolith with a crystallization pressure of 5.2 ± 0.6 kbars inferred from two-pyroxene geobarometry and basaltic andesite enclaves from Bezymianny record less radiogenic Pb isotope compositions than their host magmas. Hence, assimilation of such lithologies in the middle or lower crust can explain the Pb isotope data in Bezymianny andesites, although a component of magma mixing with less radiogenic mafic recharge magmas and possible mantle heterogeneity cannot be excluded. Lead isotope compositions for the Klyuchevskoy Group are less radiogenic than other arc segments (Karymsky—Eastern Volcanic Zone; Shiveluch—Northern Central Kamchatka Depression), which indicate increased lower-crustal assimilation beneath the Klyuchevskoy Group. Decadal timescale Pb isotope variations at Klyuchevskoy demonstrate rapid changes in the magnitude of assimilation at a volcanic center. Lead isotope data coupled with trace element data reflect the influence of crustal processes on magma compositions even in thin mafic volcanic arcs.     

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity.

Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial.

The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.     

Magmatic and hydrothermal inclusions in carbonatite of the Magnet Cove Complex,Arkansas

The carbonatite at Magnet Cove, Arkansas, USA contains a great variety and abundance of magmatic and hydrothermal inclusions that provide an informative, though fragmentary, record of the original carbonatite melt and of late hydrothermal solutions which permeated the complex in postmagmatic time. These inclusions were studied by optical and scanning electron microscopy. Primary magmatic inclusions in monticellite indicate that the original carbonatite melt contained approximately 49.7 wt% CaO, 16.7% CO₂, 15.7% SiO₂, 11.4% H₂O, 4.4% FeO+Fe₂O₃, 1.1% P₂O₅ and 1.0% MgO. The melt was richer in SiO₂ and iron oxides than the carbonatite as now exposed; this is attributed to crystal settling and relative enrichment of calcite at shallower levels. The density of the carbonatite melt as revealed by the magmatic inclusions was approximately 2.2–2.3 g/cc. Such a light melt should separate rapidly from any denser parent material and could be driven forcibly into overlying crustal rocks by buoyant forces alone. Fluid inclusions in apatite suggest that a separate (immiscible) phase composed of supercritical CO₂ fluid of low density coexisted with the carbonatite magma, but the inclusion record in this mineral is inconclusive with respect to the nature of any other coexisting fluids. Maximum total pressure during CO₂ entrapment was about 450 bars, suggesting depths of 1.5 km or less for apatite crystallization and supporting earlier proposals of a shallow, subvolcanic setting for the complex. Numerous secondary inclusions in the Magnet Cove calcite contain an intriguing variety of daughter minerals including some 19 alkali, alkaline earth and rare earth carbonates, sulfates and chlorides few of which are known as macroscopic phases in the complex. The exotic fluids from which the daughter minerals formed are inferred to have cooled and diluted through time by progressive mixing with local groundwaters. These fluids may be responsible for certain late veins and elemental enrichments associated with the complex.     

Life-cycle cost and sustainability analysis of light-frame wood residential communities exposed to tornados

Natural Hazards - Tornadoes pose a significant threat to residential communities, causing enormous physical damage and losses to their social fabric. The dominant type of single-family residential...     

Systematics and biology of some desmodont bivalves from the Australian Permian

The Australian Permian bivalves Megadesmus, Astartila, Pyramtis, and Myonia have previously been grouped in either the Family Pachydomidae (Fischer, 1887) or the Family Edmondiidae (King, 1850). Because of similarities in their musculature (in addition to those in dentition, micro‐ornament, and to some extent, shape) they can now be included in the same family as the deep‐burrowing bivalve Vacunella (previously Chaenomya). Vacunella is closely related to the living genus Pholadomya which has existed at least since the Mesozoic, and the two can be placed in the same family — Pholadomyidae (Fleming, 1828). Because of these similarities between Pholadomya, Vacunella, and the “Pachydomidae” it seems likely that the middle and upper Palaeozoic edmondioid bivalves gave rise to the Mesozoic and Cainozoic pholadomyoids, and that these two groups together constitute a major division of the Class Bivalvia — a division that may have been relatively distinct since Ordovician time.