Active mud volcanoes on the upper slope of the western Nile deep-sea fan—first results from the P362/2 cruise of R/V Poseidon

In February 2008, cruise P362/2 was undertaken aboard R/V Poseidon to the Giza and North Alex mud volcanoes (MVs) on the upper slope of the western Nile deep-sea fan. Emitted fluids were strongly depleted in chloride and rich in hydrocarbons, predominantly of thermogenic origin. In-situ sediment temperature measurements indicate extremely high and moderate levels of activity for the North Alex MV and Giza MV, respectively, and suggest rapid changes from dormant to active stages. Both the physical properties of core sediments (e.g., color and magnetic susceptibility), and their assemblages of micro- and nannofossils point to different sources for the two mud volcanoes. Biostratigraphic dating suggests source depths of 2,100–2,450 mbsf for the Giza MV and 1,150–1,550 mbsf for the North Alex MV. Very high temperatures of up to 70°C in shallow sediments at the North Alex MV can be explained only if the fluid source were warmer and deeper than the sediment source.     

Accumulation of Cu and Zn in discarded antifouling paint particles by the marine gastropod, Littorina littorea

The short-term (5 day) accumulation of Cu and Zn in different tissues of the marine gastropod, Littorina littorea, has been studied in the presence of 10 mg l⁻¹ of antifouling paint particles and pre- or simultaneously contaminated algal food (Ulva lactuca). Accumulation of Cu was observed in the head–foot, digestive gland–gonad complex and gills to extents dependent on how and when food was contaminated and administered. However, retention of Zn was only observed in the gills and only when L. littorea and U. lactuca were simultaneously exposed to paint particles. Relative to the alga, faecal material was highly enriched in Zn, suggesting that the animal is able to rapidly eliminate this metal, most likely through the formation and egestion of insoluble phosphate granules. Thus, L. littorea is a useful biomonitor of marine contamination by antifouling applications in respect of Cu but not Zn.     

The impact of scour processes on a smothered reef system in the Irish Sea

The Irish Sea, like many marine areas, is threatened by anthropogenic activities. In particular the Pisces Reef system, a series of smothered rocky reefs are subject to fishing pressures as a result of their position within a Nephrops norvegicus fishery. In an area of sediment deposition and retention the reefs modify the environment by increasing the energy of near-bottom currents which results in localised scouring. This is the first study to attempt to characterise and investigate the ecological functioning of the Pisces Reef system. A multidisciplinary approach was essential for accurate investigation of the area. To facilitate more effective management of the benthic habitats of the Reef system, this study integrates acoustic, seismic, grab sampling and video ground-truthing methods for benthic habitat discrimination. Orientation of the scour hollows also suggest that seabed features could be used to infer dominant flow regimes such as the Irish Sea Gyre. The data revealed significant geology–benthos relationships. A unique biotope was described for the reef habitat and it was demonstrated that scouring may influence community composition through disturbance mechanisms. This study provides preliminary information required for management of a unique habitat within a uniform region.     

Multi‐proxy study of Holocene environmental change and human activity in the Central Apennine Mountains,Italy

This paper describes a multi‐proxy palaeoecological investigation undertaken in conjunction with an archaeological survey of the Upper Sangro Valley in the Abruzzo National Park, Central Italy. Despite being a biodiversity hotspot and regarded as a near‐pristine area, the pollen, spore and diatom data all show major changes in the vegetation extending to over 2000 m a.s.l. during the mid to late Holocene. Although there are changes in ecological composition earlier in the Holocene they are different in type and magnitude from the changes which began about 800 cal a BC. The pollen and diatom evidence do not correlate well with regional palaeoclimate data, or on‐site isotopic evidence, but do appear to be related to Samnite (later Iron Age) clearance and upland grazing associated with transhumance and later annexation (and centuriation) of the lower slopes by Roman surveyors. The greatest change in vegetation was during the period c. AD 500–600 and corresponds with the Byzantine–Gothic Wars, and Lombard–Carolingian settlement reorganization into nucleated hilltop settlements which managed upland grazing. This pattern of intensive land use at all altitudes persisted until the early 20th century and only changed following rural depopulation after World War II. These data illustrate how cultural factors had a profound effect on this mountainous region which, in this case, far outweighed the effects of climatic fluctuations which are known to have occurred from both this study area and the region. Copyright © 2012 John Wiley & Sons, Ltd.     

Geodynamic modelling of the Century deposit,Mt Isa Province,Queensland

This paper is concerned with an example of quantitative modelling of orebody formation as a guide to reducing the risk for future mineral exploration. Specifically, the paper presents a detailed 3–D numerical model for the formation of the Century zinc deposit in northern Queensland. The model couples fluid flow with deformation, thermal transport and chemical reactions. The emphasis of the study is a systems approach where the holistic mineralising system is considered rather than concentrating solely on the mineral deposit. In so doing the complete plumbing system for mineralisation is considered with a view to specifying the critical conditions responsible for the ore deposit occurring where it does and having the size and metal grades that are observed. The numerical model is based on detailed geological, tectonic, isotopic and mineralogical data collected over the past 20 years. The conclusions are that the Century zinc deposit is located where it is because of the following factors: (i) a thermal anomaly is associated with the Termite Range Fault due to advection of heat from depth by fluid flow up the Termite Range Fault; (ii) bedding‐plane fissility in the shale rocks hosting the Century zinc deposit has controlled the wavelength and nature of D₁ folding in the vicinity of the deposit and has also controlled increases in permeability due to hydrofracture of the shales; such hydrofracture is also associated with the production of hydrocarbons as these shales passed through the ‘oil‐window’; (iii) Pb–Zn leached from crustal rocks in the stratigraphic column migrated up along faults normal to the Termite Range Fault driven by topographic relief associated with inversion at the end of the Isan Orogeny; these fluids mixed with H₂S derived at depth moving up the Termite Range Fault to mix with the crustal fluids to precipitate Pb–Zn in a plume downstream from the point of mixing. Critical factors to be used as exploration guides are high temperatures, carbonaceous fissile shales now folded into relatively tight D₁ folds, fault‐controlled plumbing systems that enable fluid mixing, depletion of metals upstream of the deposit and,in particular,a very wide Fe‐depletion halo upstream of the deposit.     

Spatial correlation of marine wind‐speed observations

Abstract

The spatial characteristics of the wind speeds from ships, drilling platforms, and satellites (SASS and SMMR) were investigated through autocorrelation analysis. Values of the spatial correlation coefficient in minimum separation classes revealed that SASS winds contained the least noise, followed by drilling‐platform and SMMR winds, measured ship winds and estimated ship winds. The variances explained by wind‐speed observations within a 100‐km radius of each other were found to be 86, 72, 62, 48 and 41%, respectively. Ship wind‐speed estimates made during hours of darkness showed significantly higher noise than daytime reports.     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.     

The Congo Basin forests in a changing climate: Policy discourses on adaptation and mitigation (REDD+)

This paper discusses the discourses on climate change adaptation and mitigation that are currently at the forefront in the Congo Basin. On mitigation, the forests have enormous opportunities to contribute to the reducing emissions from deforestation and forest degradation (REDD+) mechanism. But the forest itself and its multiple dependent societies and sectors need to adapt to potential climate risks. Hence, actors are debating the design of climate change policy in the forest sector. Theoretically, we combine the agency-focus of frame analysis and discourse theory to analyze how different agents hold frames on climate change adaptation and mitigation policies in the region. This paper draws upon interviews with 103 different actors from government, international organizations, non-governmental organizations, research institutions and private sector in three countries: Cameroon, Central African Republic (CAR) and Democratic Republic of Congo (DRC). Three discourses were found on policy response to climate change in the forest sector: mitigation policy only, separated policy on adaptation and mitigation, and an integrated policy on adaptation and mitigation. The various frames articulated around each discourse by the coalitions include elements of: costs and benefits, scale of operation, effectiveness, financial resources and implementation mechanisms. Overall, the mitigation discourse, through its mix of actors, resources and interests seems to be stronger than the adaptation discourse. The paper finally outlines a number of implications of the discourses for policy design.     

Sensitivity of crop yields and land resource potential to climatic change in Ontario,Canada

Increasing concentrations of atmospheric CO₂ and other greenhouse gases are expected to contribute to a global warming. This paper examines the potential implications of a climatic change corresponding to a doubling of atmospheric concentrations of CO₂ on crop production opportunities throughout Ontario, a major food producing region in Canada. The climate is projected to become warmer and drier, but the extent of these shifts are expected to vary from region to region within Ontario. The effect of this altered climate on crop yields and the area of land capable of supporting specific crops varies according to region, soil quality and crop type. Most notable are the enhanced opportunities for grains and oilseeds in the northern regions, and the diminished production prospects for most crops in the most southerly parts of Ontario.