Burial and degradation of organic carbon in Louisiana shelf/slope sediments

The primary focus of this paper is to better understand carbon burial on the Louisiana continental margin using spatial scales that covered various shelf depositional areas far-field and near-field (sediment and organic carbon inputs relative to river mouth proximity) and covering a variety of sedimentation rates. Box-cores samples were collected in July 2003; cores were collected along two depositional transects extending westward and southward from the Southwest Pass (SW Pass). A key difference between the two transects sampled in this study was the greater occurrence of mobile muds derived from spillover from shallower regions along the westward 50 m isobaths. The dominant mechanism for mixing in the surface active zone (SAZ) on the inner Louisiana shelf was due to physical, not biological, forces. Burial efficiencies for organic carbon (57.2–91.5%) and total nitrogen (44.2–86.9%) ranged widely across all shelf stations. Lower burial efficiencies for bulk organic carbon, total nitrogen, and pigment biomarkers were associated with mobile muds west of Southwest Pass. Chlorophyll a concentrations were significantly higher than pheopigments at depth at the Mississippi River and Southwest Pass stations, making up 40.4 and 77.4% of total pigment concentrations in the (SAZ) and 46.2 and 63.2% in the accumulation zone (AZ), respectively. These results are in agreement with earlier plant pigment studies which showed that a large fraction of the phytodetritus delivered to the inner shelf was derived from coastal and river diatoms. The amount of lignin preserved with depth decreased with increasing residence time in the SAZ and diagenetic zone (DZ) along the canyon transect but not along the western transect. Trends for lignin concentration followed previously identified surface sediment trends indicating overall lower burial of refractory terrestrial material at depth with greater distance offshore.     

Timing and mechanisms controlling evaporite diapirism on Ellef Ringnes Island,Canadian Arctic Archipelago

The Permo‐Carboniferous to Eocene Sverdrup Basin in Canada's Arctic Archipelago is strongly influenced by evaporite diapirism. However, salt structures within the basin have not been extensively investigated recently due to their remote location. This study includes the interpretation of legacy seismic reflection and borehole data to characterize the geometry of selected evaporite domes, and 1D backstripping of wells to investigate tectonic and sedimentary influences on diapirism. Extensional rift‐structures appear to have played a significant role in the formation of evaporite domes by triggering and directing salt movement. Diapirism was initiated by at least the Middle Triassic and continued to develop during the Mesozoic. Differential loading of salt on opposing east–west dome margins led to their present day asymmetric geometries. Diapir growth rates in the Mesozoic were closely linked to the rate of sedimentation and influenced by regional tectonism.     

Emplacement age and thermal footprint of the diamondiferous Ellendale E9 lamproite pipe, Western Australia

The diamondiferous Ellendale 9 (E9) pipe is a funnel-shaped maar-diatreme volcano consisting of inward-dipping tuff sequences intruded by lamproite plugs and dykes. The host rocks for the E9 pipe are Permian sandstones. The multiple lithological contacts exposed within the mined maar volcano provide a natural laboratory in which to study the effect of volcanic processes on U–Th–Pb–He systematics. Zircon from the regional sandstone and E9 lamproite display a bimodal distribution of ages on (U–Th)/He–U/Pb plots. The zircon U/Pb ages for the E9 pipe (n?=?52) range from 440 to 2,725 Ma, while the cluster of (U–Th)/He ages for the lamproite dyke zircon indicate that dyke emplacement occurred at 20.6?±?2.8 Ma, concordant with a maximum emplacement age of about ≤22 Ma from phlogopite ⁴⁰Ar/³⁹Ar. These ages indicate a xenocrystic origin for the zircon entrained in the E9 dyke. The U/Pb ages of detrital zircon from the regional sandstone host (373–3,248 Ma; n?=?41) are indistinguishable from those of the lamproite zircon xenocrysts, whereas the detrital zircon in the host sandstone yield (U–Th)/He ages from 260 to 1,500 Ma. A thermochronology traverse across the E9 lamproite dyke reveals that the zircon (U–Th)/He ages in the host sandstone have not been significantly thermally reset during dyke emplacement, even at the contact. The capability of the zircon (U–Th)/He method to distinguish deep, mantle source lithologies from upper crustal source lithologies could be used in geochemical exploration for diamonds. Pre-screening of detrital samples using etching and helium assay methods will improve the efficiency and decrease the cost of greenfields exploration.     

Geological and thermochronological studies of the Dashui gold deposit, West Qinling Orogen, Central China

The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.     

Pore Water Characteristics Following a Release of Neat Ethanol onto Pre-existing NAPL

Neat ethanol (75.7 L) was released into the upper capillary zone in a continuous-flow, sand-packed aquifer tank (8.2 m³) with an average seepage velocity of 0.75 m/day. This model aquifer system contained a residual nonaqueous phase liquid (NAPL) that extended from the capillary zone to 10 cm below the water table. Maximum aqueous concentrations of ethanol were 20% v/v in the capillary zone and 0.08% in the saturated zone at 25 and 30 cm downgradient from the emplaced NAPL source, respectively. A bench-scale release experiment was also conducted for a similar size spill (scaled to the plan area). The concentrations of ethanol in ground water for both the bench- and pilot-scale experiments were consistent with advective–dispersive limited mass transfer from the capillary to the saturated zone. Concentrations of monoaromatic hydrocarbons and isooctane increased in the pore water of the capillary zone as a result of both redistribution of residual NAPL (confirmed by visualization) and enhanced hydrocarbon dissolution due to the cosolvent effect exerted by ethanol. In the tank experiment, higher hydrocarbon concentrations in ground water were also attributed to decreased hydrocarbon biodegradation activity caused by preferential microbial utilization of ethanol and the resulting depletion of oxygen. These results infer that spills of highly concentrated ethanol will be largely confined to the capillary zone due to its buoyancy, and ethanol concentrations in near-source zone ground water will be controlled by mass transfer limitations and hydrologic conditions. Furthermore, highly concentrated ethanol releases onto pre-existing NAPL will likely exacerbate impacts to ground water, due to NAPL mobilization and dissolution, and decreased bioattenuation of hydrocarbons.     

Evaluation of spatially clustered ordnance when using compliance sampling surveys after clean-up at military training sites

After site clean-up teams have removed all of what they believe to be UXO within a specific impact area, statistical compliance sampling is a possible method for verifying with a specified probability that this area has been cleaned to specifications. Schilling [J Qual Technol 10(2):47–51, 1978, Acceptance sampling in quality control. Marcel Dekker, Inc., New York, 1982] developed a compliance sampling methodology based on the hypergeometric distribution. Bowen and Bennett (1987) also use compliance sampling where they provide an approximation for estimating the number of samples (n) required to state with desired probability that the entire population of sample units (N, where n < N) are in compliance with cleanup goals. This article describes two methods (anomaly and transect) for applying the Schilling [J Qual Technol 10(2):47–51, 1978, Acceptance sampling in quality control. Marcel Dekker, Inc., New York, 1982] compliance sampling method to military training sites. After describing these methods, a simulation study is presented which demonstrates the performance of transect compliance sampling calculations based on varied degrees of clustered UXO within a specific impact area and different types of sampling routines.     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

An Analytic Model For A Mantle Plume Fed By A Boundary Layer

Summary. An approximate analytical solution for flow in a mantle plume of constant radius, viscosity, and density contrast is obtained in cylindrical coordinates. the differential equations for vertical velocity of the mantle surrounding the plume and for topography are homologous to the equation for flexure of an elastic plate. Although the model is too simple to be fully applicable to the Earth, one can conclude that the vertical velocity in the mantle changes significantly away from plumes, that the viscosity of the plume is important for controlling flow rate, and that the long-wavelength geoid anomalies are sensitive to the viscosity of the surrounding mantle. the first induced upwelling away from a plume is quite weak and unlikely to control the spacing of plumes.     

The policy relevance of global environmental change research

Many scientists are striving to identify and promote the policy implications of their global change research. Much basic research on global environmental change cannot advance policy directly, but new projects can determine the relevance of their research to decision makers and build policy-relevant products into the work. Similarly, many ongoing projects can alter or add to the present science design to make the research policy relevant. Thus, this paper shows scientists working on global change how to make their research policy relevant. It demonstrates how research on physical global change relates to human dimensions studies and integrated assessments. It also presents an example of how policy relevance can be fit retroactively into a global change project (in this case, SRBEX—the Susquehanna River Basin Experiment) and how that addition can enhance the project's status and science. The paper concludes that policy relevance is desirable from social and scientific perspectives.     

The Taylor Creek Rhyolite of New Mexico: a rapidly emplaced field of lava domes and flows

The Tertiary Taylor Creek Rhyolite of southwest New Mexico comprises at least 20 lava domes and flows. Each of the lavas was erupted from its own vent, and the vents are distributed throughout a 20 km by 50 km area. The volume of the rhyolite and genetically associated pyroclastic deposits is at least 100 km³ (denserock equivalent). The rhyolite contains 15%–35% quartz, sanidine, plagioclase, ±biotite, ±hornblende phenocrysts. Quartz and sanidine account for about 98% of the phenocrysts and are present in roughly equal amounts. With rare exceptions, the groundmass consists of intergrowths of fine-grained silica and alkali feldspar. Whole-rock major-element composition varies little, and the rhyolite is metaluminous to weakly peraluminous; mean SiO₂ content is about 77.5±0.3%. Similarly, major-element compositions of the two feldsparphenocryst species also are nearly constant. However, whole-rock concentrations of some trace-elements vary as much as several hundred percent. Initial radiometric age determinations, all K–Ar and fission track, suggest that the rhyolite lava field grew during a period of at least 2 m.y. Subsequent ⁴⁰Ar/³⁹Ar ages indicate that the period of growth was no more than 100 000 years. The time-space-composition relations thus suggest that the Taylor Creek Rhyolite was erupted from a single magma reservoir whose average width was at least 30 km, comparable in size to several penecontemporaneous nearby calderas. However, this rhyolite apparently is not related to a caldera structure. Possibly, the Taylor Creek Phyolite magma body never became sufficiently volatile rich to produce a large-volume pyroclastic eruption and associated caldera collapse, but instead leaked repeatedly to feed many relatively small domes and flows.The new ⁴⁰Ar/³⁹Ar ages do not resolve preexisting unknown relative-age relations among the domes and flows of the lava field. Nonetheless, the indicated geologically brief period during which Taylor Creek Rhyolite magma was erupted imposes useful constraints for future evaluation of possible models for petrogenesis and the origin of trace-element characteristics of the system.