Aspects of Modern Raytracing Application Design

Simulating the propagation of seismic energy in an inhomogeneous, possibly anisotropic earth model is a challenging problem, both theoretically and from the computer implementation side. While most publications in the geophysical literature focus on the theory, this paper illustrates how recent advances in computer science can be of great value to researchers who try to create numeric realizations of complex geophysical processes such as seismic raytracing. Modern concepts including object- oriented programming, combined with new and often free-of-charge development tools can significantly improve productivity and flexibility in implementing and exploring new ideas.A variety of issues important in wavefront-construction based raytracing are ad- dressed and it is demonstrated how modern program design may help researchers to more quickly produce better software implementations and free up time to focus on the fundamental theoretical problems.     

Size-Resolved Aerosol Characterization for a Polluted Episode at the IfT Research Station Melpitz in Autumn 1997

Inorganic ions, organic carbon (OC), elemental carbon (EC) and a variety of organic single species in airborne particles have been determined at the research station of the Leibniz – Institut für Troposphärenforschung (IfT) in Melpitz (Germany) in autumn 1997.Samples of eight selected measurement events were divided in two groups in order to investigate differences in the chemical composition of particles originating from southwesterly (SW – developed EU countries) or from easterly directions (E – less developed eastern countries). Differences between these two groups were tested statistically by Student's t-test.Five stage cascade impactor samples show nitrate as most abundant in the accumulation mode in the SW group. EC and sulphate show the most abundant mass fractions in the E group. That can be considered as a consequence of domestic coal heating and coal-fired power plant emissions in the region of westerly Poland, northern Czech Republic and easterly Germany. Higher nitrate concentrations in the SW group can be explained by stronger NO _x emissions caused by the leeward plume of the conurbation of Leipzig, as well as by the still higher traffic density in western Germany.The methane sulphonic acid (MSA) mass fraction was higher for SW air masses in accumulation mode particles, probably indicating marine origin. Succinic acid also showed higher mass fractions for the SW group. This could be caused by primary emission in automobile exhaust gases and photochemical formation during transport from SW. Indeed, during SW sampling, solar radiation intensity was higher than during E sampling.The observed differences in the particle composition are an expression of the still existing technology gradient in Europe. Future campaigns could show the development to a joint economy with smaller differences in anthropogenic emissions.     

Reef development on a deepening platform: two Early Cretaceous coralgal patch reefs (Catí, Llàcova Formation, eastern Spain) compared

Two coralgal patch reefs of the Hauterivian Llàcova Formation (Maestrat Basin, eastern Spain), exposed at two consecutive stratigraphic levels within a single section, have been studied to document taxonomic implications of a changing environment. These two reefal palaeocommunities differ substantially in coral taxonomic composition, microbialite formation pattern and in abundance and composition of encrusters and bioeroders. Of a total of 14 coral species, just one (Stylina parvistella) occurs in both reefs, yet is abundant in the (lower) reef A and rare, occurring near the reef base, in the reef B assemblage. Reef A is dominated by a phototrophic fauna and coral species with small corallites and imperforate septa (a stylinid-thamnasteriid-heterocoeniid-actinastreid association), along with an encruster association dominated by Bacinella and Lithocodium. Reef B is characterised by a balanced phototrophic-heterotrophic fauna that gradually passes into a heterotrophic-dominated assemblage. During this latest growth stage, microsolenid corals dominated the assemblage. The encruster fauna is characterised by sponges, polychaetes and bryozoans. Moderate deepening during a transgressive systems tract (TST) depositional sequence and elevated nutrient supply are interpreted to represent the driving environmental parameters that caused faunal compositions to differ between these two reefal palaeocommunities. Nine coral taxa, previously known only from younger (Barremian–Cenomanian) strata, have been identified, namely Dimorphocoenia? rudis, Eocomoseris raueni, Eocomoseris sp., Holocoenia jaccardi, Latusastrea irregularis, Mesomorpha sp., Microsolena kugleri, Polyphylloseris mammillata and Polyphylloseris sp. This observation emphasises the importance of the Hauterivian Stage as a period of evolutionary transition in Late Jurassic–Cretaceous coral faunas.     

Inorganic nitrogen dynamics in intertidal rocky biofilms and sediments of the Douro River estuary (Portugal)

In this study rates of oxygen, ammonium (NH₄ ⁺), nitrate (NO₃ ⁻), nitrite (NO₂ ⁻), and nitrous oxide (N₂O) fluxes, nitrogen (N) fixation, nitrification, and denitrification were compared between two intertidal sites for which there is an abundant global literature, muddy and sandy sediments, and two sites representing the rocky intertidal zone where biogeochemical processes have scarcely been investigated. In almost all sites oxygen production rates greatly exceeded oxygen consumption rates. During daylight, NH₄ ⁺ and NO₃ ⁻ uptake rates together with ammonification could supply the different N requirements of the primary producer communities at all four sites; N assimilation by benthic or epilithic primary producers was the major process of dissolved inorganic nitrogen (DIN) removal; N fixation, nitrification, and denitrification were minor processes in the overall light DIN cycle. At night, distinct DIN cycling processes took place in the four environments, denitrification rates ranged from 9 ± 2 to 360 ± 30 μmol N₂ m⁻² h⁻¹, accounting for 10–48% of the water column NO₃ ⁻ uptake; nitrification rates varied from 0 to 1712 ± 666 μmol NH₄ ⁺ m⁻² h⁻¹. A conceptual model of N cycle dynamics showed major differences between intertidal sediment and rocky sites in terms of the mean rates of DIN net fluxes and the processes involved, with rocky biofilm showing generally higher fluxes. Of particular significance, the intertidal rocky biofilms released 10 times the amount of N₂O produced in intertidal sediments (up to 17 ± 6 μmol N₂O m⁻² h⁻¹), representing the highest N₂O release rates ever recorded for marine systems. The biogeochemical contributions of intertidal rocky substrata to estuarine and coastal processes warrant future detailed investigation.     

Genesis of Palaeoproterozoic iron skarns in the Misi region, northern Finland

Sodic alteration is widespread in Palaeoproterozoic greenstone and schist belts of the northern Fennoscandian shield. In the Misi region that forms the easternmost part of the Peräpohja schist belt, several small magnetite deposits show intimate spatial relationships with intensely albitised gabbros, raising the possibility that regional sodic alteration released iron, which was subsequently accumulated into deposits. Two of these magnetite deposits, Raajärvi and Puro display a typical paragenesis as follows (from oldest to youngest): (1) diopside, (2) actinolite/tremolite-magnetite ± chlorite, biotite, and (3) serpentine ± hematite, chlorite. Mass balance calculations suggest that significant amounts of Fe, Ca, Mg, K, Cu, V, and Ba were lost, and Na and Si gained during the albitisation of the gabbro, at near-constant Al, Ga, Ti, and Zr. Significant amounts of Si, Ca, Fe, and Na were enriched in the formation of skarn related to magnetite deposits. Fe and V leached from country rocks deposited during the skarn-alteration and formed the vanadium rich iron deposits while Cu passed through the system without significant precipitation due to low sulphur fugasity. Variations in Na, Ca, Mg, K, and Ba contents reflect the composition of the infiltrating fluid during alteration. Conventional heating-freezing measurements and proton-induced X-ray emission (PIXE) analyses of the fluid inclusions related to actinolite/tremolite-magnetite stage alteration indicate that the fluids that caused the alteration and the Fe-mineralisation were complex, oxidised, highly saline H₂O ± CO₂ fluids that contained high amounts of Na, Ca, K, Fe, and Ba as well as elevated concentrations of Cu, Zn, and Pb. The oxygen isotope thermometry suggest that temperature during the Fe-mineralisation stage was between 390 and 490°C. Calculated δ¹⁸O_fluid values of 6.1–9.8‰ SMOW and δ¹³C values of calcites in the ores and skarns were between ?7.7 and 10.9‰ PDB and most likely reflect admixture of ¹³C depleted, possibly magmatic fluids with the marble wall rocks that show δ¹³C_calcite values of 13‰ PDB. The SIMS U–Pb data on the zircons in the albitised gabbro next to the Raajärvi and Puro deposits suggest that intrusion of the gabbro took place at 2123±7 Ma and was accompanied by the formation of diopside skarn. The TIMS data on the metasomatic titanites related to sodic alteration yielded ages of 2062±3 and 2017±3 Ma. Iron was probably stripped from the mafic country rocks by sodic alteration between 2123 and 2017 Ma, driven by repeated brine influxes. Subsequently, the metal-rich brine was focused by a fault system and the iron was precipitated from this fluid by a combination of wall rock reaction, fluid mixing, and a drop in the temperature.     

The geology and Re–Os geochronology of the Palaeoproterozoic Vaikijaur Cu–Au–(Mo) porphyry-style deposit in the Jokkmokk granitoid, northern Sweden

The Vaikijaur Cu–Au–(Mo) deposit is located in the ca. 1.88 Ga calc-alkaline Jokkmokk granitoid near the Archaean–Proterozoic palaeoboundary within the Fennoscandian shield of northern Sweden. The Skellefte VMS district lies immediately to the south and the northern Norrbotten Fe-oxide–Cu–Au deposits to the north. The Vaikijaur deposit occupies an area of 2×3 km within the Jokkmokk granitoid and includes stockwork quartz-sulphide veinlets and disseminated chalcopyrite, pyrite, gold, molybdenite, magnetite, and pyrrhotite. Porphyritic mafic dykes were emplaced along fractures in a ring dyke pattern. The Jokkmokk granitoid, dykes, and the mineralized area are foliated, indicating that mineralization predated the main regional deformation. The mineralized area is characterized by strong potassic alteration. Phyllic and propylitic alteration zones are also present. A pyrite-rich inner core is surrounded by a concentric zone with pyrite, chalcopyrite, and gold. Molybdenite is distributed irregularly throughout the chalcopyrite zone. Geophysical data indicate a strongly conductive central zone in the mineralized area bordered by conductive and high magnetic zones. Five high precision Re–Os age determinations for three molybdenite occurrences from outcrop and drill core samples constrain the age of porphyry-style Cu–Au–(Mo) mineralization to between 1889±10 and 1868±6 Ma. A younger molybdenite is associated with a much later metamorphic event at about 1750 Ma. These data suggest that primary porphyry-style mineralization was associated with calc-alkaline magmatism within the Archaean–Proterozoic boundary zone at ca. 1.89–1.87 Ga.     

The Cenozoic Lower Rhine Basin – rifting, sedimentation, and cyclic stratigraphy

In the Cenozoic, the Lower Rhine Basin formed as a rift at the southeastern terminus of the Dutch German Central Graben, while the Rhenish Massif was uplifted. The study focusses on the marginal marine and fluvial fill of the Lower Rhine Basin. A basin model is developed. Support for this study was given by extensive industry outcrop and well data, by new stratigraphical and sedimentological observations. The ingression and subsequent regression of the Cenozoic North Sea is analysed using the concept of base level cyclicity. As the geohistory of the basin was complex, a subsidence curve is constructed. Furthermore, an attempt is made to trace the simultaneous uplift of the Rhenish Massif.     

Anaerobic ammonium oxidation by nitrite (anammox): Implications for N2 production in coastal marine sediments

The respiratory reduction of nitrate (denitrification) is acknowledged as the most important process that converts biologically available nitrogen to gaseous dinitrogen (N₂) in marine ecosystems. Recent findings, however, indicate that anaerobic ammonium oxidation by nitrite (anammox) may be an important pathway for N₂ formation and N removal in coastal marine sediments and in anoxic water columns of the oceans. In the present study, we explored this novel mechanism during N mineralization by ¹⁵N amendments (single and coupled additions of ¹⁵NH₄⁺, ¹⁴NO₃⁻ and ¹⁵NO₃⁻) to surface sediments with a wide range of characteristics and overall reactivity. Patterns of ^29/30N₂ production in the pore water during closed sediment incubations demonstrated anammox at all 7 of the investigated sites. Stoichiometric calculations revealed that 4% to 79% of total N₂ production was due to this novel route. The relative importance of anammox for N₂ release was inversely correlated with remineralized solute production, benthic O₂ consumption, and surface sediment Chl a. The observed correlations indicate competition between reductants for pore water nitrite during early diagenesis and that additional factors (e.g. availability of Mn-oxides), superimposed on overall patterns of diagenetic activity, are important for determining absolute and relative rates of anammox in coastal marine sediments.