Observations of tectonic microdisplacements in Europe in relation to the Iran 1997 and Turkey 1999 earthquakes

Long-term repeated measurements of microdisplacements in tectonic fault structures of various parts of Central Europe and the Balkan Mountains showed that displacement trends changed significantly at several points in the period from 1997 through 2000; afterward, long-term trends were restored. This phenomenon took place in the periods of strong (M > 7) earthquakes in Iran (1997) and in the North Anatolian fault zone in Turkey (1999). Two strong Izmit earthquakes of 1999 in Turkey at distances of 600 km from the Balkan Peninsula and 1400 km from observation points in Central Europe were the main seismic events of the period studied. Apparently, the crustal deformation due to the sources of the aforementioned earthquakes reaches the central part of the European craton. Anomalous displacements in some areas occurred due to deformation propagating for great distances in the heterogeneous block medium of the West European part of the Eurasian plate. Changes in stresses can be caused by impulsive deformations of various intensities acting on some structural units (fault segments) at various distances.     

Binary gas sorption/desorption experiments on a bituminous coal: Simultaneous measurements on sorption kinetics,volumetric strain and acoustic emission

There is still no clear understanding of the specific interactions between coal and gas molecules. In this context sorption–desorption studies of methane and carbon dioxide, both in a single gas environment and gas mixtures, are of fundamental interest. This paper presents the results of unique simultaneous measurements of sorption kinetics, volumetric strain and acoustic emission (AE) on three tetragonal coal samples subjected to sorption of carbon dioxide and methane mixtures. The coal was a high volatile bituminous C coal taken from the Budryk mine in the Upper Silesia Basin, Poland. Three different gas mixtures were used in the sorption tests, with dominant CO₂, with dominant CH₄ and a 50/50 mixture.The experimental set-up was designed specially for this study. It consisted of three individual units working together: (i) a unit for gas sorption experiments using a volumetric method, (ii) an AE apparatus for detecting, recording and analysing AE, and (iii) a strain meter for measuring strains induced in the coal sample by gas sorption/desorption. All measurements were computer aided.The experiments indicated that the coal tested showed preferential sorption of CH₄ at 2.6 MPa pressure and exhibited comparable affinities for CH₄ and CO₂ at higher pressures (4.0 MPa). The results of chromatographic analysis of the gas released on desorption suggested that the desorption of methane from the coal was favoured. The relationship between the volumetric strain and the amount of sorbed gas was found to be non-linear. These results were contrary to common opinions on the coal behaviour. Furthermore, it appeared that the swelling/shrinkage of coal was clearly influenced by the network of fractures. Besides, the AE and strain characteristics suggested common sources of sorption induced AE and strain.The present results may have implications for the sequestration of carbon dioxide in coal seams and enhanced coalbed methane recovery (ECBM).     

From Cadomian arc to Ordovician passive margin: geochemical records preserved in metasedimentary successions of the Orlica-Śnieżnik Dome in SW Poland

The chemical composition of metamorphosed siliciclastic rocks in the Orlica-?nie?nik Dome (Bohemian Massif) identifies the main sources for the Neoproterozoic [the M?ynowiec Formation (MF)], Early Cambrian [the Stronie Formation (SF)] and Late Cambrian/Early Ordovician [the Goszów quartzites (GQ)] sediments. The MF developed from erosion of a Cadomian magmatic arc along the northern Gondwana margin. The variegated SF, with supra-subduction affinities, shows chemical characteristics pointing to erosion of the freshly exhumed Cadomian orogen and detritus deposition in the back-arc basin. The very different chemical features of the GQ indicate deposition in a basin sited on a passive continental margin. The explanation proposed for the observed changes in chemical composition involves three main stages: (1) The pre ~540 Ma evolution of an active continental margin and related back-arc basin ceased with the collision and accretion of the magmatic arc to the Gondwana margin; (2) Early Cambrian rift to drift transition (540–500 Ma) and development of a depositional basin filled with detritus derived from remnants of the magmatic arc; (3) Peri-Gondwana break-up leading to the formation of shallow-water passive margin depositional basins filled with quartz-rich detritus resembling Early Ordovician Armorican quartzites known from other parts of the Variscan Belt.     

Holocene paleohydrological reconstruction of Lake Strzeszyńskie (western Poland) and its implications for the central European climatic transition zone

Western Poland is located in the central European climatic transition zone, which separates the mild and humid Atlantic climate of Western Europe and the East European continental climate. This region is sensitive to lateral shifts of the European climate zones and is particularly suitable for reconstructing Holocene climate variability. This paper presents detailed analyses of the sedimentary record from Lake Strzeszyńskie since the Late Pleistocene. These include smear-slide and thin-section observations, X-ray fluorescence core scanning, magnetic susceptibility measurements, pollen analyses, and radiocarbon dating. The sediment record reveals three distinct sedimentary units consisting of: (1) an alternation of sand layers and laminated silt and clay deposits accumulated prior to 14,600 cal yr BP; (2) faintly laminated calcareous sediments intercalated with organic matter-rich layers deposited between 14,600 and 10,200 cal yr BP; and (3) massive calcareous mud deposited after 10,200 cal yr BP. The Holocene period is marked by nine phases of organic-rich sedimentation and enhanced Fe deposition, which occurred at ca. 10.1, 9.3, 6.4–6.1, 5.5–5.1, 4.7–4.5, 2.7–2.4, 1.3–1.2, 0.8–0.6, 0.4–0.2 kyr cal BP. These phases are associated with high lake levels and correspond with wet periods recognized in several other records from Poland and central Europe. These phases partly coincide with North Atlantic cold periods, which may suggest that high lake levels are triggered by an ocean-continent linking mechanism.     

Improvement of the geoid in local areas by satellite-to-satellite tracking

Summary The concept of satellite-to-satellite tracking measuring the relative velocity of two orbiting satellites spaced some hundreds kilometers on a close orbit, provides now possibilities for the investigation of the Earth’s gravity field. In the paper only medium and short wave length effects affecting the measured relative velocity have been considered. Collocation is used in such an analysis of local geoid improvement, because this method allows to combine heterogeneous data in a consistent way. Covariance functions relevant for the particular case of a circular equatorial orbit are given. Two kinds of observation equations have been formulated. The choice of observation equation with regard to satellites configuration is discussed. It is found that it is sufficient to have a limited number of satellite-to-satellite observations in a 7^o×7^o area around the estimation point with distances between profiles of about 1^o.5 and between the two satellites forming the pair of 200+350 km; the altitude of satellite-to-satellite observations should be as low as possible. The accuracy of the geoid determination strongly depends on the degree and order of the reference field used. An accuracy of about ±1 m can be achieved with an assumed reference field of (40,40). The influence of measuring errors is discussed and it is shown that only satellite-to-satellite observations with accuracy better then 0.1 mm/sec will give an improvement of the geoid. Finally, some results on the combination of low-low satellite-to-satellite tracking and terrestrial gravity data are given. The proposed method seems to be especially interesting for unsurveyed areas. Furthermore, it has the practical advantage that only a local coverage data is needed.     

Biosorption optimization and equilibrium isotherm of industrial dye compounds in novel strains of microscopic fungi

The aim of this study was to evaluate the biosorption capacity of selected strains of microscopic fungi. We optimized the biosorption process and used the Freundlich isotherm for three strains: H. haematococca BwIII43, K37 and T. harzianum BsIII33 to describe the biosorption equilibrium of anthraquinone dye, Alizarin Blue Black B (ABBB) and alkali lignin (AL). In optimal conditions (1 g of mycelium biomass, pH = 7.0, 28 °C) for ABBB and AL sorption, the live biomass of H. haematococca BwIII43 was characterized by a higher sorption capacity, amounting to 247.47 and 161.00 mg g^?1, respectively. The highest sorption properties toward anthraquinone dye (K _F = 19.96 mg g^?1) were shown for the biomass of H. haematococca K37. In the presence of alkali lignin, the highest sorption capacity and bond strength exhibited the biomass of H. haematococca BwIII43 (K _F = 28.20 mg g^?1, n = 3.46). Effective decolorization of ABBB and AL by the selected strains of microscopic fungi indicated that the biosorption process additionally enhanced the removal of color compounds from the solution.     

Effects of Oxbow Reconnection Based on the Distribution and Structure of Benthic Macroinvertebrates

This study focuses on the assessment of relationships between flow and macrozoobenthos structure that was performed in a reconnected oxbow lake located in the S?upia River floodplain (northern Poland). The lake was created during river straightening at the beginning of 20th century by cutting off the right‐bank meander. The oxbow restoration was performed to enhance the ecological viability of this water body and restore riverine wetland. In July 2000 the oxbow was connected with the river channel through PVC pipes which enabled free water movement. Macrozoobenthos sampling, as well as chemical analyses of water and hydrological measurements, took place both before and after the oxbow reconnection. Before the oxbow reconnection, the dominant species was Asellus aquaticus, whereas after the reconnection the structure of benthic species changed significantly. During the first year it was replaced by bivalves and Chironomidae larvae and then A. aquaticus. After the reconnection, macrozoobenthos mean density was 5‐fold higher and the mean wet biomass was 77‐fold higher than before the reconnection. The number of taxa increased from 4 before the oxbow reconnection to 17 during the first year after the performed works and 20 in the next year. We stated that the revitalization process of the reconnected oxbow lake has long‐term consequences for the benthic communities. The most significant feature of the oxbow reconnection is the qualitative and quantitative recolonization by riverine macrozoobenthos species. The performed restoration significantly improved ecological status of the oxbow lake by the increase in biodiversity and water quality.     

Meteoroid Stream Searching: The Use of the Vectorial Elements

In this initial study, we propose a new distance function D _V involving heliocentric vectorial orbital elements. The function measures differences between: the orbital energies, the angular momentums vectors and the Laplace vectors. In comparison with the widely used D _SH criterion of Southworth and Hawkins, D _D criterion of Drummond and their hybrid D _H by Jopek, the new function contains one invariant with respect to the principal secular perturbation: the orbital energy. The new function proved to be useful in the classification amongst the IAU2003 meteoroids which we searched for streams by D _V function and also using D _SH and D _N -function given by Valsecchi et al. For major streams, the results agree very well. For minor, and near-ecliptical streams the results sometimes differ markedly.     

The use of selected research methods to describe the pore space of dolomite from copper ore mine,Poland

Basic knowledge of the characteristics of copper-bearing rock such as dolomite is essential to locate those areas of the deposit which have different structural and textural properties. Those regions can be important in terms of the assessment of the possibilities of gas accumulating in them as well as in terms of gasogeodynamic hazard. To better understand those threats, it is necessary to locate, monitor and analyse those areas in detail. This article characterises the structural and textural parameters of dolomite from the Polkowice–Sieroszowice copper mine in Poland. The study involved five samples from various areas of the mine. A number of research methods were selected. Reflected and transmitted light microscopy (MS), computer microtomography (Micro-CT), gas adsorption porosimetry (LPNA), mercury porosimetry (MIP), helium and quasi-fluid pycnometry (Pycno. He, DryFlo). Each of the methods examined a different scope of the pore size, which enabled to achieve a full view of the porous nature of those rocks. We determined their porosity (open, closed, total), surface area as well as mean size and volume of the pores. Also, we studied the character and the pore size distribution from a few nm to a few mm. Comprehensive dolomite properties analyses showed that these rocks are characterised by high structural variability. They have mesopores and macropores but few micropores. The analyses presented in this paper are determined by a large petrographic diversity of the deposits containing dolomite. This article is an example of a comprehensive approach to the rock analysis in copper ore mines.