基于骨架化和蜘蛛编码的面状实体匹配方法研究

同名面实体在不同来源的地图数据库中的矛盾性表达致使相关领域的研究出现诸多瓶颈问题,由此实体匹配作为基础研究成为首要解决的关键问题,本文采用两阶段匹配策略实现面实体匹配,预匹配中通过面积相异度进行初步判定,终匹配时先对面状实体进行骨架化从而降低点和线的维度,再用基于蜘蛛编码的方法实现匹配。最终实现的匹配算法由大比例尺地图数据库中的房产图和地形图进行匹配实验,结果证明了该算法的匹配效率和准确度。     

基于北斗的车辆管理系统关键技术应用研究

基于北斗系统的导航和通信功能,并利用嵌入式地理信息技术、SOPC嵌入式技术、计算机接口通讯控制技术和数据库技术构建一个高效、稳定的车辆管理系统。通过对该系统中各项关键技术的深入研究,实现了车辆终端自主导航、车辆信息管理、车辆远程控制和路线监管等车辆管理功能。研究表明,本文关键技术可以推广到多项基于北斗系统的应用中。     

Possibilities of GPS Kinematic Measurements for Geological Survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN(system of united trigonometric cadaster network) and Baa(the Baltic Sea after adjustment).Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points.Geodetic network was adjusted by two ways.     

Evaluation of pre-CHAMP gravity models `GRIM5-S1' and `GRIM5-C1' with satellite crossover altimetry

 The new GFZ/GRGS gravity field models GRIM5-S1 and GRIM5-C1, currently used as initial models for the CHAMP mission, have been compared with other recent models (JGM 3, EGM 96) for radial orbit accuracy (by means of latitude lumped coefficients) in computations on altimetry satellite orbits. The bases for accuracy judgements are multi-year averages of crossover sea height differences from Geosat and ERS 1/2 missions. This radially sensitive data is fully independent of the data used to develop these gravity models. There is good agreement between the observed differences in all of the world's oceans and projections of the same errors from the scaled covariance matrix of their harmonic geopotential coefficients. It was found that the tentative scale factor of five for the formal standard deviations of the harmonic coefficients of the new GRIM fields is justified, i.e. the accuracy estimates, provided together with the GRIM geopotential coefficients, are realistic. Received: 20 February 2001 / Accepted: 24 October 2001     

遥感技术在腾冲西南地区地热资源研究预测中的应用

利用TM数据,对滇西腾冲西南地区进行地质构造解译,阐明了该区多地热活动的原因.通过对TM6波段热红外异常信息的提取,经构造解译与地热异常分布区的叠加分析,发现了该区地热富集的规律性,提出了地热田的遥感影像模式.据此,预测出腾冲西南地区62处水热活动Ⅰ级异常区.     

地理空间元数据和基于网络的数据分发技术

首先介绍了元数据、地理空间元数据的概念，探讨了在互联网时代研究地理空间元数据的迫切性和必要性；其次，论述了构建基于网络的数据分发方案的可行性，并就其中的关键技术实现做了深入的探讨；最后，提出了一个以地理空间元数据标准为依据，以Internet为依托的数据分发站点的整体设计方案以及实现这项技术还应考虑的问题。     

某办公楼变形原因浅析及对策--建筑物变形监测实例

作者就某办公楼发生倾斜及裂缝后 ,对其进行建筑物变形观测这一实例 ,就其观测方法和建筑物发生变形的原因进行了总结及分析 ,并提出了治理的对策 ,为该建筑物维修方案的制定提供了依据。     

Multifrequency algorithms for precise point positioning: MAP3

We present the new MAP3 algorithms to perform static precise point positioning (PPP) from multifrequency and multisystem GNSS observations. MAP3 represents a two-step strategy in which the least squares theory is applied twice to estimate smoothed pseudo-distances, initial phase ambiguities, and slant ionospheric delay first, and the absolute receiver position and its clock offset in a second adjustment. Unlike the classic PPP technique, in our new approach, the ionospheric-free linear combination is not used. The combination of signals from different satellite systems is accomplished by taking into account the receiver inter-system bias. MAP3 has been implemented in MATLAB and integrated within a complete PPP software developed on site and named PCube. We test the MAP3 performance numerically and contrast it with other external PPP programs. In general, MAP3 positioning accuracy with low-noise GPS dual-frequency observations is about 2.5 cm in 2-h observation periods, 1 cm in 10 h, and 7 mm after 1 day. This means an improvement in the accuracy in short observation periods of at least 7 mm with respect to the other PPP programs. The MAP3 convergence time is also analyzed and some results obtained from real triple-frequency GPS and GIOVE observations are presented.     

基于定向片模型的SPOT-5遥感影像自检校光束法平差

本文通过建立内方位自检校模型,利用定向片模型对外方位元素进行内插建模,建立了基于定向片模型的自检校光束法平差,研究不同控制点数量和不同定向片间隔对定位精度的影响,并利用河南嵩山地区SPOT-5遥感影像数据对模型进行了实验验证和分析,结果表明,平面精度可以达到10.06m,高程精度可以达到8.84m.     

嫦娥3号巡视探测器桅杆的转动角度误差检校

嫦娥3号巡视探测器桅杆的展开机构、偏航机构和俯仰机构在转动过程中存在系统性的偏差,这些误差影响了巡视探测器导航定位、地形恢复和路径规划的精度.针对这一问题,文章提出了一种间接平差模型,通过真实数据试验证明该方法能够用于对嫦娥3号巡视探测器桅杆的转动角度误差进行检校,并且具有很高的精度和稳定性.