The application of satellite differential SAR interferometry-derived ground displacements in hydrogeology

The application of satellite differential synthetic aperture radar (SAR) interferometry, principally coherent (InSAR) and to a lesser extent, persistent-scatterer (PSI) techniques to hydrogeologic studies has improved capabilities to map, monitor, analyze, and simulate groundwater flow, aquifer-system compaction and land subsidence. A number of investigations over the previous decade show how the spatially detailed images of ground displacements measured with InSAR have advanced hydrogeologic understanding, especially when a time series of images is used in conjunction with histories of changes in water levels and management practices. Important advances include: (1) identifying structural or lithostratigraphic boundaries (e.g. faults or transitional facies) of groundwater flow and deformation; (2) defining the material and hydraulic heterogeneity of deforming aquifer-systems; (3) estimating system properties (e.g. storage coefficients and hydraulic conductivities); and (4) constraining numerical models of groundwater flow, aquifer-system compaction, and land subsidence. As a component of an integrated approach to hydrogeologic monitoring and characterization of unconsolidated alluvial groundwater basins differential SAR interferometry contributes unique information that can facilitate improved management of groundwater resources. Future satellite SAR missions specifically designed for differential interferometry will enhance these contributions.     

Meltwater production in Antarctic blue-ice areas: sensitivity to changes in atmospheric forcing

In the near coastal regions of Dronning Maud Land, Antarctica, below-surface ice-melt in blue-ice areas has been observed. The low scattering coefficients of the large-grained blue-ice allow penetration of solar radiation, thus providing an energy source below the ice surface. The sub-surface meltwater is significant enough to show up on remote-sensing imagery in the form of ice-covered lakes. Adjacent snow-accumulation areas have much higher scattering coefficients and consequently limit solar radiation penetration in these regions. These snow and ice surfaces are generally below freezing, and little surface melting occurs. To assess the response of these melt features to changes in atmospheric forcings such as cloudiness, air temperature, and snow accumulation, a physically-based model of the coupled atmosphere, radiation, snow, and blue-ice system has been developed. The model consists of a heat transfer equation with a spectrally-dependent solar-radiation source term. The penetration of radiation into the snow and blue-ice depends on the surface albedo, and the snow and blue-ice grain size and density. Model simulations show that ice melt occurring in this area is sensitive to potential variations in atmospheric forcing. Under certain conditions more traditional surface melting occurs and, under other conditions, the existing melt processes can be shut down completely. In light of the sensitivity of this system to variations in atmospheric forcing, and the ability to view melt-related features using remote sensing, a tool exists to efficiently monitor variations in Antarctic coastal climate.     

Introduction

Marine Geophysical Research -     

Identifying local spatial association in flow data

In this paper we develop a spatial association statistic for flow data by generalizing the statistic of Getis-Ord, G _i (and G _i ^*). This local measure of spatial association, G _ij, is associated with each origin-destination pair. We define spatial weight matrices with different metrics in flow space. These spatial weight matrices focus on different aspects of local spatial association. We also define measures which control for generation or attraction nonstationarity. The measures are implemented to examine the spatial association of residuals from two different models. Using the permutation approach, significance bounds are computed for each statistic. In contrast to the G _i statistic, the normal approximation is often appropriate, but the statistics are still correlated. Small sample properties are also briefly discussed. Received: 18 February 1998/Accepted: 29 September 1998     

Observation of Filterable Bromine Variabilities During Arctic Tropospheric Ozone Depletion Events in High (1hour) Time Resolution

The halogen ions Br^- and Cl^- together with NO₃ ^-, SO₄ ⁼, MSA^- (methane sulfonate), Na⁺ and NH₄ ⁺ were analysed by ion chromatography in extracts of more than 800 aerosol cellulose filter samples taken at Ny Ålesund, Svalbard (79°N, 12°E) in spring 1996 (March 27 - May 16) within the European Union project ARCTOC (Arctic Tropospheric Ozone Chemistry). Anticorrelated variations between f-Br (filterable bromine, i.e. water soluble bromine species that can be collected by aerosol filters) and ozone within the arctic troposphere were evaluated at a resolution of 1 or 2 hours for periods with depleted ozone and 4 hours at normal ozone. A mean f-Br concentration of 11 ng m^-3 (0.14 nmol m^-3) was observed for the whole campaign, while maximum concentrations of 80 ng m^-3 (1 nmol m^-3) were detected during two total O₃-depletion events (O₃ drop to mixing ratios below the detection limit of < 2 ppb). Anticorrelation between f-Br and O₃ was also seen during minor O₃-depletion episodes (sudden drop in O₃ by at least 10 ppb, but O₃ still exceeding the detection limit) and even for ozone variations near its background level (40-50 ppb). A time lag of about 10 hours between the change of ozone and of f-Br concentrations could only be found during a total ozone depletion event, when f-Br reached its maximum values several hours after ozone was totally destroyed. Bromine oxide (BrO) concentrations, measured by DOAS (Differential Optical Absorption Spectroscopy), and f-Br showed a coincident variability during almost the entire campaign (except in the case of total O₃-loss). Frequently enhanced anthropogenic nitrate and sulphate concentrations were observed during O₃-depletion periods. At O₃ concentrations < 10 ppb sulphate and nitrate exceed their typical mean level by 54% and 77%, respectively. This may indicate a possible connection between acidity and halogen release.     

Secondary copper enrichment in tailings at the Laver mine, northern Sweden

 Field and laboratory studies of the sulphide-bearing tailings at Laver, northern Sweden, show that the present release of metals from the tailings is low, especially with regard to Cu. A large part of the Cu released by sulphide oxidation is enriched in a distinct zone just below the oxidation front. The enrichment zone occurs almost all over the tailings area except in areas with a shallow groundwater table. The Cu enrichment is caused by formation of covellite and adsorption onto mineral surfaces. The transport of Zn, Co, Cd, Ni and S seems to be controlled mainly by adsorption. No secondary zone or secondary minerals containing these metals have been found. Just below the groundwater table, metals are released into solution when the enrichment zone reaches the groundwater due to the low pH. An increased release of metals, especially Cu, can be expected in the future, since the enrichment zone is moving towards the groundwater table. Received: 4 December 1997 · Accepted: 17 December 1998     

Estimation of Seismic Velocities from Deep Reflections in the τ-p Domain

—In deep reflection seismics the estimation of seismic velocities is hampered in most cases due to the low signal level with respect to noise. In the τ-p domain, it is possible to perform the velocity analysis even under such unfavorable signal conditions. This is achieved by making use of special properties of the transform, which enhance the signal-to-noise ratio. Further noise suppression is realized by incorporating filter procedures into the transform algorithm. The velocity analysis itself is also done in the τ-p domain by calculating and evaluating constant velocity gathers. The results can be directly used in the time domain. A mute algorithm, implemented into the τ-p velocity analysis procedure, further reduces noise. This velocity estimation method is discussed with synthetic data and applied to DEKORP data.     

Testing electric field models using ring current ion energy spectra from the Equator-S ion composition (ESIC) instrument

During the main and early recovery phase of a geomagnetic storm on February 18, 1998, the Equator-S ion composition instrument (ESIC) observed spectral features which typically represent the differences in loss along the drift path in the energy range (5–15 keV/e) where the drift changes from being E × B dominated to being gradient and curvature drift dominated. We compare the expected energy spectra modeled using a Volland-Stern electric field and a Weimer electric field, assuming charge exchange along the drift path, with the observed energy spectra for H⁺ and O⁺. We find that using the Weimer electric field gives much better agreement with the spectral features, and with the observed losses. Neither model, however, accurately predicts the energies of the observed minima.     

DNA tracers with information capacity and high detection sensitivity tested in groundwater studies

 In order to investigate the usefulness of unique synthetic DNA tracers in groundwater, a field experiment was conducted in Norway. DNA tracers and a sodium-chloride tracer were injected into an aquifer. The transport of DNA molecules was interpreted by comparing with the plume of chloride ions under forced-gradient steady-state flow conditions. Spatial concentration moments described the migration of conservative tracers. Mobility and migration of DNA in groundwater demonstrate that DNA tracers can be detected by using the polymerase chain reaction (PCR) and DNA sequence analysis. The results indicate that DNA tracers can be valuable tools as tracers in groundwater investigations. Received, June 1997 / Revised, July 1998, December 1998 / Accepted, January 1999