云南个旧多金属矿石门坎—保和地区Sn、Sb元素的成矿信息识别与提取

石门坎—保和地区位于云南个旧多金属成矿区西南部,成矿背景复杂,成矿作用具有多期性和多样性。利用研究区1∶1万土壤化探数据,采用泛克里格法和因子分析相结合的方法,提取不同层次的成矿异常信息。结果表明:主因子F_3包含Mo-Au-Sb等元素,反映成矿过程中的岩体和热液相关信息;主因子F_4包含Sn-Bi-W元素,指示中低温热液矿化环境; Sb沿杨家田断裂呈串珠状分布,反映了由北东向构造控制的空间变化特征,与已知矿点对应良好; Sn元素异常在研究区北部呈双峰状环形分布,推测受隐伏岩体或者断层控制。根据元素组合异常F_3和F_4的分布规律,结合地质资料圈定出2个找矿靶区,为进一步找矿工作提供了方向。     

Generation and Development of Structures and Their Controls on Ore Mineralization in the Lehong Zinc-lead Deposit,Northeastern YunnanEI北大核心CSCD

The Lehong zinc-lead deposit is one of the new-found large Zn-Pb deposits in the Sichuan- Yunnan-Guizhou Zn-Pb poly-metallic mineralization area. The ore-bodies of the Lehong deposit are strictly controlled by structures, and the fault tectonites can be divided into four groups which include morbruk rock, cataclastic rock and tectonic breccia. The mechanical properties of the faults suggest that there are five tectonic systems formed in the Caledonian-early Hercynian, Indosinian-early Yanshanian, mid-Yanshanian, late Yanshanian and Himalayan periods, respectively. The Lehong fault and the Qiaojia-Lianfeng fault are two important ore-controlling structures which might have acted as channel ways of the ore fluids. The ores are hosted in the subordinary fracture zone, joint fracture zone and interlayer fault zones in trailing folds of the Lehong fault and the Baobaoshang syncline and Jinjiagou anticline. Hence, the Lehong deposit is a tectonic -controlled ore deposit. These research do not only lay a foundation for studying deposit genesis and ore-finding direction in the Lehong deposit, but also provides important enlightenments for the ore-finding prognosis of lead-zinc deposits in northwestern Guizhou ore concentration district. © 2018, Science Press. All right reserved.     

桂林毛村岩溶区与碎屑岩区檵木和马尾松凋落叶分解研究

为探究岩溶生态环境对凋落叶分解的影响,选用碎屑岩区相同树种作为对比,运用凋落物分解网袋法研究其凋落物分解初期动态,研究结果表明:（1）岩溶区檵木和马尾松凋落叶分解速率总体上均小于碎屑岩区相同树种凋落叶分解速率;（2）凋落叶分解速率k与凋落叶初始养分碳含量呈显著负相关（P<0.05）,与木质素含量呈极显著负相关（P<0.01）;（3）在凋落叶分解过程中,各养分释放规律具有一定的差异,凋落叶养分元素碳在分解过程中呈现出净释放;（4）岩溶区树种的碳释放速率比碎屑岩区慢,说明岩溶区两树种的凋落在一定程度上延长了C的循环周期      

风廓线雷达产品与ERA5再分析资料的对比分析

利用2019-2020年广西三部风廓线雷达的实时风产品与ERA5再分析资料进行分析对比,检验风廓线雷达数据质量.结果 表明,三种风廓线雷达产品(ROBS、HOBS、OOBS)数值差距小,OOBS产品稍显优势,在1h内风廓线雷达探测的水平风波动不大.风廓线雷达数据整体小于ERA5再分析资料.三个站中,北海站的误差最小.北海站误差在2-6km,柳州站在4-6km,南宁站风向误差最小在1-4km,风速在4～6km.三个站的数据在0.5km以下误差都很大,柳州站和南宁站在9km以上误差也很大.分别选取北海站105°、6.5m·s-1,南宁站100°、7m·s-1,柳州站85°、8m·s-1作为极端误差阈值,剔除极端误差后三个站的MAE都小于25°和3m·s-1,并且数据有效率都能达到70％以上.     

顾及邻近点变形因素的高斯过程建模及预测

针对传统的变形监测建模方法一般针对单一监测点的变形预测模型,未考虑到监测点间相互作用的变形特点,该文分析了变形监测点间的相互关联性,通过相关系数法对监测点进行分类,并将邻近监测点的观测序列值作为和时间因素等同的影响因子应用到建模过程中,利用高斯过程算法进行训练,建立预测模型。为提高高斯过程算法的模型预测精度,应选择适合工程案例最优协方差函数。通过实例分析,比较GM(1,1)、多点灰色预测模型和顾及邻近点变形因素的高斯过程等3种模型在基坑围岩、滑坡等变形监测数据处理中的预测精度,表明该文算法考虑到监测点间的变形关联性,充分利用高斯过程在针对小样本、非线性数据建模时的高自适应性等优点,具有较高的预测精度。     

轨道误差对InSAR相位影响的BP神经网络去除法

针对用二次多项式法去除轨道误差对InSAR相位影响时,须对干涉相位其他项分布性质作假设,且自身存在一定的模型缺陷的问题,该文提出用BP神经网络去除轨道误差对InSAR相位影响的方法。研究表明:BP神经网络法在使用时无须对干涉相位其他项分布性质作假设,模型更优。模拟实验中,轨道误差相位拟合残差更小;真实数据实验中,纠正后非形变区相位集中在零值附近,且波动趋势更为平稳。该方法一定程度上降低了传统二次多项式法的应用局限性。     

Geometric-constrained multi-view image matching method based on semi-global optimization

Targeting at a reliable image matching of multiple remote sensing images for the generation of digital surface models, this paper presents a geometric-constrained multi-view image matching method, based on an energy minimization framework. By employing a geometrical constraint, the cost value of the energy function was calculated from multiple images, and the cost value was aggregated in an image space using a semi-global optimization approach. A homography transform parameter calculation method is proposed for fast calculation of projection pixel on each image when calculating cost values. It is based on the known interior orientation parameters, exterior orientation parameters, and a given elevation value. For an efficient and reliable processing of multiple remote sensing images, the proposed matching method was performed via a coarse-to-fine strategy through image pyramid. Three sets of airborne remote sensing images were used to evaluate the performance of the proposed method. Results reveal that the multi-view image matching can improve matching reliability. Moreover, the experimental results show that the proposed method performs better than traditional methods.     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

A modified three-dimensional ionospheric tomography algorithm with side rays

The three-dimensional ionospheric tomography (3DCIT) algorithm based on Global Navigation Satellite System (GNSS) observations have been developed into an effective tool for ionospheric monitoring in recent years. However, because the rays that come into or come out from the side of the inversion region cannot be used, the distribution of the rays in the edge and bottom part of the inversion region is scarce and the electron density cannot be effectively improved in the inversion process. We present a three-dimensional tomography algorithm with side rays (3DCIT-SR) applying the side rays to the inversion. The partial slant total electron content (STEC) of side rays in the inversion region is obtained based on the NeQuick2 model and GNSS-STEC. The simulation experiment results show that the algorithm can effectively improve the distribution of GNSS rays in the inversion region. Meanwhile, the iteration accuracy has also been significantly improved. After the same number of iterations, the iterative results of 3DCIT-SR are closer to the truth than 3DCIT, in particular, the inversion of the edge regions is improved noticeably. The GNSS data of the International GNSS Service (IGS) stations in Europe are used to perform real data experiments, and the inversion results show that the electron density profiles of 3DCIT-SR are closer to the ionosonde measurements. The accuracy improvement of 3DCIT-SR is up to 56.3% while the improvement is more obvious during the magnetic storm compared to the case of a calm ionospheric state .     

A new GPS/BDS tropospheric delay resolution approach for monitoring deformation in super high-rise buildings

A new approach for deformation monitoring of super high-rise building using GPS/BDS technology is proposed for the case when prior coordinates are known and the baseline is short but has a large height difference. The approach is based on the ambiguity function method (AFM). Considering that the double-differenced (DD) troposphere delay residual error cannot be ignored, the relative zenith tropospheric delay (RZTD) parameter is introduced into the original AFM equation. Thus, the RZTD and 3D coordinate parameters are together obtained through the modified AFM (MAFM). Due to the low computational efficiency of conventional AFM, an improved particle swarm optimization (IPSO) algorithm is used to search the four optimal parameters X/Y/Z/RZTD and replaces the grid search method. In this study, GPS/BDS deformation monitoring data for buildings with approximately 290 m height difference were used to verify the feasibility of the proposed MAFM. Numerical results show a single-epoch average computation time of approximately 0.3 s, which meets the requirements of near-real-time dynamic monitoring. The average accuracy of the GPS single-epoch RZTD solution is better than 1 cm, the combined GPS/BDS MAFM performance outperforms the GPS-only system, and using multi-epoch observations can further improve the accuracy of the RZTD solution. After RZTD correction, GPS/BDS monitoring precision can be improved, particularly the height dimension, whose precision is improved by approximately 6 cm.