测绘监理体系架构及应用研究——以南京市大比例尺矢量地形图基础测绘项目为例

针对南京市大比例尺矢量地形图基础测绘项目,架构并细化了具有南京特色的全过程"五二一三"(五控制、二管理、一协调、三评价)测绘监理体系以及配套的测绘监理文档.并通过理论联系实践,将其应用到白2004年以来开展的多轮次南京市大比例尺矢量地形图基础测绘项目中.使其在实践中不断得到完善、深化和发展.实践证明.南京市测绘监理体系是科学的、有效的、可行的,其应用取得了较大的经济效益和社会效益,其建立促进了南京市测绘项目管理的进一步发展.     

Hyperspectral Radiometry to Quantify the Grades of Iron Ores of Noamundi and Joda Mines,Eastern India

This paper present the results of a preliminary study to assess the potential of the visible, NIR and SWIR energy of the EMR in differentiating iron ores of different grades in a rapid manner using hyperspectral radiometry. Using different iron ore samples from Noamundi and Joda mines, Jharkhand and Orissa, states of India, certain spectro-radiometric measurements and geochemical analysis were carried out and the results have been presented. It was observed that the primary spectral characteristics of these iron ores lie in the 850 to 900 nm and 650–750 nm regions. The spectral parameters for each curve used for studying the iron ores are: (i) the slopes of the spectral curve in 685–725 nm region; (ii) position of the peak with respect to wavelength in 730–750 nm region and (iii) radius of curvature of the absorption trough in the 850–900 nm region. Comparison of these spectral parameters and the geochemistry of the samples indicates that the position of the peak of the curve in 730–750 nm region shifts towards longer wavelength with increasing iron oxide content, while the slope of the curvature in the 685–725 nm region has a strong negative correlation with the iron oxide content of the samples. Similarly, a strong negative correlation is observed between the radius of curvature of the 850–900 nm absorption trough and the iron oxide content. Such strong correlations indicate that hyperspectral radiometry in the visible and NIR regions can give a better estimate and quantification of the grades of iron ores. This study has demonstrated that generation of empirical models using hyperspectral radiometric techniques is helpful to quantify the grade of iron ores with limited geochemical analysis.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

Attitude estimation based on fusion of gyroscopes and single antenna GPS for small UAVs under the influence of vibration

An attitude estimation method is presented for small unmanned aerial vehicles (UAVs) powered by a piston engine which is the major source of vibration. Vibration of the engine significantly degrades the accuracy of the inertial measurement unit, especially for low-cost sensors that are based on micro electro-mechanical system. Therefore, a vibration model for a small UAV is proposed in order to examine the influence of vibration on attitude estimation with different sensors. The model is derived based on spectrum analysis with short-time Fourier transform. The vibration is compared with the drift of the gyroscope in order to examine the impact on attitude estimation. An attitude estimation method that fuses the gyroscopes and single antenna global positioning system (GPS) is proposed to mitigate the influence of engine vibration and gyroscope drift. The quaternion-based extended Kalman filter is implemented to fuse the sensors. This filter fuses the angular rates measured by the gyroscopes and the pseudo-attitude derived from the GPS velocity to estimate the attitude of the UAV. Simulations and experiment results indicate that the proposed method performs well both in short-term and long-term accuracy even though the gyroscopes are affected by drift and vibration noise, while the pseudo-attitude contains severe noise.     

TAZ-level variation in work trip mode choice between 1990 and 2000 and the presence of rail transit

Rail transit continues to be a popular alternative for cities as a tool for alleviating automobile congestion and for redeveloping areas into transit and pedestrian-friendly environments. Ideally, rail transit will draw trips away from cars, but the quantitative work that tests this notion has often been either case studies of neighborhoods, in which conclusions are tough to generalize, or citywide comparisons where important spatial variation is lost in aggregation. This study seeks to narrow this gap in the research by using multivariate analysis of covariance to isolate the effect of covariates and cities on changes in work trip mode choice at the traffic analysis zone (TAZ) level for nine cities between 1990 and 2000. The results suggest differences by city in the change at the TAZ level of the proportion of people driving alone and taking transit. Increases in transit usage were associated with cities that built rail transit, while increases in automobile commuting and decreases in transit usage were associated with cities that did not.     

WAAS对流层延迟模型及其在网络RTK中的应用

对流层延迟误差是GPS定位中的一项主要误差源,一般可采用模型改正或待定参数的方法进行处理。本文首先介绍如何使用WAAS模型进行对流层延迟改正,然后给出一种网络RTK的对流层延迟误差的处理方法,最后通过对实测数据的处理,证明本文方法可有效地用于网络RTK用户对流层延迟实时改正和分析。     

Skyline-based registration of 3D laser scans

Acquisition and registration of terrestrial 3D laser scans is a fundamental task in mapping and modeling of cities in three dimensions. To automate this task marker-free registration methods are required. Based on the existence of skyline features, this paper proposes a novel method. The skyline features are extracted from panoramic 3D scans and encoded as strings enabling the use of string matching for merging the scans. Initial results of the proposed method in the old city center of Bremen are pre-sented.     

野外大比例尺数字化测图方法探讨

快速、高效地利用全站仪和GPSRTK获取地形图要素信息来满足用图需求是一个热点问题。主要讨论基于AutoCAD的全野外数字化测图的方法和软件的编写,该方法采用一人观测且在全站仪上作记录并编码,一人跑尺并内业绘图来完成地面数字测图工作。     

移动曲面拟合用于高程控制测量的探讨

多项式曲线拟合、三次样条曲线拟合、多项式曲面拟合、多面函数曲面拟合、移动法曲面拟合是全球定位测量水准拟合常用方法,本文结合实例,分析多种方法获得数据的精度,并通过工程实例比较和分析,认为移动法曲面拟合拟合法精度更高且稳定,具有较高的可靠性和实用价值。