Simulating flow in karst aquifers at laboratory and sub-regional scales using MODFLOW-CFP

Groundwater flow in a well-developed karst aquifer dominantly occurs through bedding planes, fractures, conduits, and caves created by and/or enlarged by dissolution. Conventional groundwater modeling methods assume that groundwater flow is described by Darcian principles where primary porosity (i.e. matrix porosity) and laminar flow are dominant. However, in well-developed karst aquifers, the assumption of Darcian flow can be questionable. While Darcian flow generally occurs in the matrix portion of the karst aquifer, flow through conduits can be non-laminar where the relation between specific discharge and hydraulic gradient is non-linear. MODFLOW-CFP is a relatively new modeling program that accounts for non-laminar and laminar flow in pipes, like karst caves, within an aquifer. In this study, results from MODFLOW-CFP are compared to those from MODFLOW-2000/2005, a numerical code based on Darcy’s law, to evaluate the accuracy that CFP can achieve when modeling flows in karst aquifers at laboratory and sub-regional (Woodville Karst Plain, Florida, USA) scales. In comparison with laboratory experiments, simulation results by MODFLOW-CFP are more accurate than MODFLOW 2005. At the sub-regional scale, MODFLOW-CFP was more accurate than MODFLOW-2000 for simulating field measurements of peak flow at one spring and total discharges at two springs for an observed storm event.     

The practicalities of using CFCs and SF6 for groundwater dating and tracing

Knowledge of groundwater residence time is important in understanding key issues in the evolution of water quality, whether this occurs due to water–rock interaction or simply by mixing or contamination. The build-up in the atmosphere of the trace gases chlorofluorocarbons (CFCs) and sulphur hexafluoride (SF₆) from the middle of the last century offers a convenient way of dating waters up to ∼60 a old. The gases are well-mixed in the atmosphere so their input functions are not area-specific as is the case with ³H. While any one of these trace gases can in principle provide a groundwater age, when two or more are measured on water samples the potential exists to distinguish between different modes of flow including piston flow, exponential flow and simple end-member mixing. As with all groundwater dating methods, caveats apply. Factors such as recharge temperature and elevation must be reasonably well-constrained. Primarily for SF₆, the phenomenon of ‘excess air’ also requires consideration. Primarily for the CFCs, local sources of contamination need to be considered, as do redox conditions. For both SF₆ and the CFCs, the nature and thickness of the unsaturated zone need to be factored into residence time calculations. However, as an inexpensive dating method, the trace gases can be applied to a wide range of groundwater problems where traditional age indicators might once have been used more sparingly. Examples include tracing flowlines, detecting small modern inputs in ‘old’ waters, and pollution risk assessment. In the future, with the main CFCs already declining in the atmosphere, new anthropogenic trace gases are likely to take their place.     

Anoxic nitrification: Evidence from Humber Estuary sediments (UK)

Conventional understanding of the nitrogen cycle in marine sediments has changed in recent years with the discovery of an alternative pathway for ammonia oxidation via the reduction of manganese oxides (during anoxic nitrification). In anoxic sediments, the potential for manganese oxides to serve as oxidant for nitrification may be considerable yet previous work on manganese-rich sediments has suggested anoxic nitrification may not be significant. In this study, the potential for anoxic nitrification in a range of sediment types was investigated. Laboratory incubation of sediment from three sites on the Humber Estuary, a microbially diverse environment, showed anoxic accumulation of nitrate, nitrite and dinitrogen gas, with and without the addition of synthetic manganese oxides. Incubation experiments confirmed anoxic nitrification as microbially mediated, with heat-killed controls yielding negative results. The anoxic nitrification reaction significantly depleted ammonia concentrations, and occurred simultaneously with manganese-, iron- and sulphate reduction, and methanogenesis. Taken in conjunction with other studies, results suggest anoxic nitrification may not only be dependent on total manganese concentrations but on manganese dynamics. Anoxic nitrification may be explained as a non-steady state reaction, dependent on the recent stability of a sediment system. Physical perturbation of sediments may cause the redistribution and/or introduction of manganese oxides and promote anoxic nitrification. The significance and persistence of anoxic nitrification is likely to depend on the frequency and magnitude of sediment perturbation, which explains why the reaction varies so widely across studied sites, and why it may not occur in some manganese-rich sediment.     

Addressing Scottish rural fuel poverty through a regional industrial symbiosis strategy for the Scottish forest industries sector

Tackling fuel poverty is central to the delivery of the Scottish Executive’s commitment to social justice. Many Scottish rural households are not linked into the mains gas network and rely on expensive alternatives, despite being surrounded by plentiful supplies of low-cost renewable wood biomass. A regional study was undertaken to establish the potential market for pelletised wood fuel, available as a low-value by-product from the rapidly expanding Scottish forest industry sector. The wider implications of the research findings are analysed by extending the principles of industrial symbiosis from a site-specific to a regional scale. Promoting an indigenous pellet-based wood fuel market for rural Scotland would fulfil important Scottish Executive economic, social and environmental sustainability objectives. Adding off-site social symbiotic elements increases the potential for on-site technical symbiosis in nascent Scottish forest industry clusters. At present, market failure is preventing the realisation of these benefits, and the paper concludes by identifying ways in which market intermediation, through wood fuel energy service companies, might overcome the current barriers to exploiting such symbiosis.     

Genetic techniques for livestock breeding: Restructuring institutional relationships in agriculture

This paper explores some of the key institutional transformations in livestock breeding associated with the increasing significance of genetic techniques, situating this within an assessment of an emerging agricultural bioeconomy. Focusing on beef cattle and sheep breeding in the United Kingdom, the paper examines how a move towards the involvement of international and corporate interests in livestock breeding is restructuring the network of institutional interests affecting the knowledge and decision making of individual breeders. The paper suggests that the structural transformation of beef cattle and sheep breeding is complicated by the need for negotiation between breeders’ ‘traditional’ knowledge-practices and the ‘geneticised’ techniques being made available to them. We are thus seeing the emergence of new and complex interactions between the major actors which are reconfiguring power relationships in the UK livestock breeding sector.     

Basement-controlled faulting of Paleozoic strata in southern Ontario, Canada: new evidence from geophysical lineament mapping

Basement fault reactivation is now recognized as an important control on sedimentation and fault propagation in intracratonic basins. In southern Ontario, the basement consists of complexly structured mid-Proterozoic (ca. 1.2 Ga) crystalline rocks and metasedimentary rocks that are overlain by up to 1500 m of Paleozoic sedimentary strata. Reactivation of basement structures is suspected to control the location of Paleozoic fault and fracture systems, but evaluation has been hindered by a limited understanding of the regional structural characteristics of the buried basement. New aeromagnetic- and gravimetric-lineament mapping presented in this paper better resolves the location of basement discontinuities and provides further evidence for basement controls on the distribution of Paleozoic fault and fracture systems. Lineament mapping was facilitated by reprocessing and digital image enhancement (micro-levelling, regional residual separation, derivative filtering) of existing regional gravity and aeromagnetic datasets. Reprocessed images identify new details of the structural fabric of the basement below southern Ontario and delineate several previously unrecognized aeromagnetic and gravity lineaments and linear zones. Linear zones parallel the projected trends of mid-Proterozoic terrane boundaries identified by field mapping on the exposed shield to the north of the study area, and are interpreted as zones of shearing and basement faulting. Mapped aeromagnetic and gravity lineaments show similar trends to Paleozoic faults and fracture networks and broad zones of seismicity in southern Ontario. These new data support an ‘inheritance model’ for Paleozoic faulting, involving repeated reactivation and upward propagation of basement faults and fractures into overlying cover strata.     

运用STOMP数值模拟器进行多空介质中尿素水解以及方解石沉淀数值模拟

遍布于美国能源部所辖野外场地的地下放射性核素和痕量金属污染对美国能源部的长期监管职能提出了最严峻的挑战。目前较有前景的一个原地固化污染物方法是利用尿素酶催化尿素水解,进而推动方解石沉淀及与之共同沉淀。运用STOMP数值模拟器实施一系列反应性溶质数值模拟来研究系统中水流、运移、反应与反应导致的介质性质变化之间的紧密的非线性耦合,并在研究中系统性增加反应系统的复杂度和物理-化学的非均质性以考察模拟效果。通过调整反应速率表达式中尿素酶浓度和沉淀反应常数,对尿素水解和方解石沉淀速率进行了敏感度分析。结果显示:尿素水解速率是矿物沉淀总量的决定性因素,沉淀物的空间分布既取决于水解速率也取决于沉淀速率;在一维水流柱6个空隙体积的时间段模拟中,观察到了5%的最大空隙度减少;当二维模拟中考虑一个低渗透性包裹体时,被改变的流场重新对生成的沉淀组成物进行了分布,形成了扭曲的反应锋面。模拟结果也显示沉淀在低渗透性区域边界上形成,这说明位于这个区域里面的污染物可能被囊裹而从流线中被隔离起来。