Calcio-carbonatite melts and metasomatism in the mantle beneath Mt. Vulture (Southern Italy)

At Mt. Vulture volcano (Basilicata, Italy) calcite globules (5–150 μm) are hosted by silicate glass pools or veins cross-cutting amphibole-bearing, or more common spinel-bearing mantle xenoliths and xenocrysts. The carbonate globules are rounded or elongated and are composed of a mosaic of 2–20 μm crystals, with varying optical orientation. These features are consistent with formation from a quenched calciocarbonatite melt. Where in contact with carbonate amphibole has reacted to form fassaitic pyroxene. Some of these globules contain liquid/gaseous CO₂ bubbles and sulphide inclusions, and are pierced by quench microphenocrysts of silicate phases. The carbonate composition varies from calcite to Mg-calcite (3.8–5.0 wt.% MgO) both within the carbonate globules and from globule to globule. Trace element contents of the carbonate, determined by LAICPMS, are similar to those of carbonatites worldwide including ΣREE up to 123 ppm. The Sr–Nd isotope ratios of the xenolith carbonate are similar to the extrusive carbonatite and silicate rocks of Mt. Vulture testifying to derivation from the same mantle source. Formation of immiscibile silicate–carbonatite liquids within mantle xenoliths occurred via disequilibrium immiscibility during their exhumation.     

Coanda effect in coastal flows

In the present paper some numerical simulations and experiments were carried out to study jet-wall interaction in shallow waters. Namely, modifications of the hydrodynamic field concerning the interaction of river run-off with a shallow coastal water body, due to the presence of marine structures, were investigated. Stratification effects due to salinity and temperature were neglected, and the interest was focused on barotropic features (Coanda effect). The numerical analysis was carried out by means of shallow water equations, numerically solved by finite difference, and the present method was validated by means of a typical simple-shaped test case. The experiments were carried out in a shallow water tank, flow visualizations were performed, and the velocity field was obtained by PIV. The main features of jet-wall interaction flow were investigated in simple-shaped geometries, and applications were shown for two practical cases: Pescara channel harbour (Adriatic Sea, Italy) and the proposed design of Latina harbour (Tyrrhenian Sea, Italy).     

Structural performance of automated multi-depth shuttle warehouses (AMSWs) under low-to-moderate seismic actions

Bulletin of Earthquake Engineering - Automated Multi-Depth Shuttle Warehouses (AMSWs) are compact storage systems that provide a large surface occupation and therefore maximum storage density....     

A large class of non-zonal oceanic flows satisfying the arnold-blumen sufficient condition for stability

Abstract

Recently Andrews has discussed an example of a topographically-forced non-zonal now satisfying the Arnold-Blumen sufficient condition for stability. At large distances from the topographic centre this flow becomes purely zonal and westward. After underlining the richness of solutions of the Andrews model, the present paper goes on to show that Andrews' technique can be applied successfully to a model where the vertical profile of static stability resembles those found in the ocean. In particular we obtain a large class of hydrodynamic stable flows, forced by the bottom topography, for continuously stratified fluids (two layers each with uniform Brunt-Väisälä frequency).     

Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

Erodibility of soft freshwater sediments in Markermeer: the role of bioturbation by meiobenthic fauna

The Markermeer is a large and shallow man-made freshwater lake in the Netherlands, characterized by its high turbidity. As part of a study aiming to mitigate this high turbidity, we studied the water–bed exchange processes of the lake’s muddy bed. The upper centimeter’s–decimeter’s of the lake bed sediments mainly consists of soft anoxic mud. Recent measurements have proved the existence of a thin oxic layer on top of this soft anoxic mud. This oxic layer, which is much easier to be eroded than the anoxic mud, is believed to be related with Markermeer’s high-turbidity levels. Our hypothesis is that the thin oxic layer develops from the anoxic mud, enhanced by bioturbation. Actually, we will demonstrate that it is the bioturbated state of the bed that increases its erodability, and not the oxidation state of the sediments. In particular, we will refer to bioturbation caused by meiobenthic fauna. The objective of this study is therefore to determine the influence of the development of the thin oxic layer on the water–bed exchange processes, as well as to establish the role of bioturbation on those processes. This is done by quantifying the erosion rate as a function of bed shear stresses, and at different stages of the development of the oxic layer. Our experiments show that bioturbation increases the rate at which Markermeer sediments are eroded by almost an order of magnitude. The short-term fine sediment dynamics in Markermeer are found to be driven by the complex and highly dynamic interactions between physics, chemistry, and biology. Finally, the long-term fine sediment dynamics are driven by the erosion of the historical deposits in the lake’s bed, which is only possible after bioturbation, and which leads to an increase of the stock of sediments in the lake’s muddy bed.     

New model to determine forces at on-bottom slender pipelines

The present paper proposes a numerical model to determine horizontal and vertical components of the hydrodynamic forces on a slender submarine pipeline lying at the sea bed and exposed to non-linear waves plus a current. The new model is an extension of the Wake II type model, originally proposed for sinusoidal waves (Soedigdo et al., 1999) and for combined sinusoidal waves and currents (Sabag et al., 2000), to the case of periodic or random waves, even with a superimposed current. The Wake II type model takes into account the wake effects on the kinematic field and the time variation of drag and lift hydrodynamic coefficients. The proposed extension is based on an evolutional analysis carried out for each half period of the free stream horizontal velocity at the pipeline. An analytical expression of the wake velocity is developed starting from the Navier–Stokes and the boundary layer equations. The time variation of the drag and lift hydrodynamic coefficients is obtained using a Gaussian integration of the start-up function. A reduced scale laboratory investigation in a large wave flume has been conducted in order to calibrate the empirical parameters involved in the proposed model. Different wave and current conditions have been considered and measurements of free stream horizontal velocities and dynamic pressures on a bottom-mounted pipeline have been conducted. The comparison between experimental and numerical hydrodynamic forces shows the accuracy of the new model in evaluating the time variation of peaks and phase shifts of the horizontal and vertical wave and current induced forces.     

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.     

Chemical characterization of fine particulate matter during peak PM10 episodes in Apulia (South Italy)

Some peak PM10 episodes, occurred during PM monitoring campaigns performed on October 2005 and February and June 2006 in Bari town, have been characterized. Moreover back trajectories of air masses and Principal Component Analyses were applied. Three of the peak PM10 episodes investigated were related to local emissions of primary pollutants during poor atmospheric dispersion conditions. The other two peak PM10 episodes considered are related with long range transport air masses toward Apulia region: in one case the chemical characterization and the back trajectories analysis indicate that high PM10 value detected is due to the Saharan dust advection in the Apulia region; in the other case air masses with different origin give rise to high PM10 value.Moreover PM10 daily mean concentrations, presented in this paper collected from January 2005 to August 2007 and obtained by automatic device in six stations of air quality monitoring networks in Bari territory, do not show a seasonal trend for PM10 concentrations, contrary to the PM10 trend shown in the towns of North Italy. This can be explained mostly considering that our region presents generally meteo-climatic conditions that favour pollutants dispersion.