地形在高大金字塔沙山形成发育过程中的作用——以敦煌鸣沙山-月牙泉地区为例

地形在金字塔沙山形成发育过程中起着重要的作用。金字塔沙山通常形成于山前地带,应属于地形屏障影响下形成的一种沙丘类型。首先,上升气流的发育是山前风阻区气流的主要特征,地形屏障是上升气流发生发展的主要原因。沙山的坡脚、坡中及坡顶分别是上升气流的启动区、发育区及衰退区。上升气流是沙山增高增大发育的主要机制。其次,金字塔沙山多发育于局地环流发育较强的地带,局地环流与区域风况配置是形成复杂沙丘类型的重要因素。本区局地环流偏南风不仅持续时间长,且受到鸣沙山微地形的影响,下坡气流较强。实地观测结果破解了常规气候台观测数据难以揭示上升气流及局地环流对金字塔沙丘形成发育的影响。第三,下附地形在沙山形成发育过程中决定着沙丘发育的“临界尺度”,即丘体达到“临界尺度”的时候,坡面上升气流及风速放大作用逐渐显现,促使丘体增高增大发育,随着沙丘形态与上升气流的互馈作用进一步增强,金字塔沙丘逐渐形成演化为高大沙山。实地观测进一步证实了金字塔沙山是纵向（横向）沙丘形变的一种形式。并提出了金字塔沙山在地形条件下形成演化的一种新模式。     

不同砾石覆盖度戈壁床面风蚀速率定量模拟

通过风洞实验,利用称重传感器自动记录风蚀观测样方重量变化过程,对供沙条件下不同砾石覆盖度戈壁床面风蚀速率进行了定量模拟研究。结果表明:砾石覆盖度是影响戈壁风蚀速率的关键因子,戈壁床面风蚀速率随砾石覆盖度增加按指数规律递减。各实验风速下,砾石覆盖度>50%时,戈壁床面风蚀速率随砾石覆盖度增加而减小量有限,甚至无风蚀发生;而盖度从10%到50%时,风蚀速率显著减小。因此,两种实验粒径砾石(3 cm与4 cm)至少在50%盖度时才能达到较好的风蚀防治效果。戈壁风蚀防护机理主要是砾石覆盖度的增加增大了砾石间沙粒的临界起动剪切风速,而且减少了作用在砾石间可蚀地表的剪切压。与沙质对照床面相比,10%~90%砾石盖度戈壁床面沙粒临界起动剪切风速增大了0.8~3.4倍,只有0.5％~28%的剪切压作用在砾石间可蚀地表。     

礁滩体与建设性成岩作用

礁、礁丘、丘同属碳酸盐建隆,礁、滩是重要勘探目的层。但各自在沉积组分、组构、环境和时空分布,以及油气地质条件上迥然不同,因而无论从理论还是勘探实践上,都有必要将其各成体系划分开来。礁滩自身为好储集岩,当建设性成岩作用叠加后可形成好的储层。碳酸盐岩优质储层形成,主要受沉积微相与建设性成岩作用两大因素控制。前者是基础,并以高能的礁滩相带为最好;后者主要包括破裂、白云石化和溶蚀三大类,并以白云石化或溶蚀为最优,其中的溶蚀分布最广泛、影响最深刻而对优质储层形成起决定性作用。礁滩储层中的古岩溶类型最为丰富多彩,包括同生期、准同生期、表生期和埋藏期热流体岩溶的所有类型,白云岩化礁滩体也不例外。其中,同生-准同生期岩溶的形成机制与礁滩沉积时高频层序旋回向上变浅序列的短暂暴露淋溶有关,表生期岩溶则受控于礁滩沉积后三级层序旋回Ⅰ型界面的暴露淋溶。由此,导致礁滩储层中除了可以也是(碳酸盐岩中)唯一保存原生孔隙外,还发育了次生溶蚀孔洞缝和大型溶洞。礁丘、灰泥丘尤其是丘间洼地中发育高有机质丰度烃源岩;它们自身没有有效的原生孔隙,但岩溶作用可以形成次生孔隙。     

Mining knowledge from result comparison between spatial clustering themes

This paper introduces some definitions and defines a set of calculating indexes to facilitate the research, and then presents an algorithm to complete the spatial clustering result comparison between different clustering themes. The research shows that some valuable spatial correlation patterns can be further found from the clustering result comparison with multi-themes, based on traditional spatial clustering as the first step. Those patterns can tell us what relations those themes have, and thus will help us have a deeper understanding of the studied spatial entities. An example is also given to demonstrate the principle and process of the method.     

Improved geological mapping using landsat-5 TM data in Weixi area, Yunnan province China

Different image processing algorithms have been evaluated in the context of geological mapping using Landsat TM data. False color composites, the principal component imagery, and IHS decorrelation stretching method for Landsat-5 TM data have been found useful for delineating the regional geological features, mainly to provide the maximum geological information of the studied area . The study testifies that using which image processing yields best results for geological mapping in arid and semiarid regions by preserving morphological and spectral information. Generally, the studied area can be divided into three main geological units: Basaltic intrusive rocks, Metamorphic with varying intensities and Sedimentary rocks.     

Identifying components for interoperable process models using concept lattice and semantic reference system

The development of interoperable environmental process models is widely supported by both the research community and government agencies. This paper discusses a conceptual framework to guide the delineation of process components, the basic unit of interoperable models. The concepts of semantic reference system and dual hierarchy are explored to establish the conceptual framework. Based on this discussion, the Formal Concept Analysis is used as an analytical approach to decompose and fuse existing environmental process models in order to identify environmental process components. For purposes of discussion, a hydrological process, surface runoff, is used throughout the paper as an example of an environmental process to support the conceptual discussion and to illustrate the application of the conceptual framework and analytical approach.     

Detrimental effects of reduced seawater pH on the early development of the Pacific abalone

The hatching process of the Pacific abalone Haliotis discus hannai was prolonged at a pH of 7.6 and pH 7.3, and the embryonic developmental success was reduced. The hatching rate at pH 7.3 was significantly (10.8%) lower than that of the control (pH 8.2). The malformation rates at pH 7.9 and pH 8.2 were less than 20% but were 53.8% and 77.3% at pH 7.6 and pH 7.3, respectively. When newly hatched larvae were incubated for 48 h at pH 7.3, only 2.7% of the larvae settled, while more than 70% of the larvae completed settlement in the other three pH treatments. However, most 24 h old larvae could complete metamorphosis in all four pH treatments. Overall, a 0.3-unit reduction in water pH will produce no negative effect on the early development of the Pacific abalone, but further reduction in pH to the values predicted for seawater by the end of this century will have strong detrimental effects.     

Magnetic detection method for seabed cable in marine engineering surveying

The detection and identification of the seabed cable is becoming an important task in the marine engineering. The features of the magnetic anomaly can be used to detect the existence of the seabed cable. The magnetic field model is presented, and the consistency of the magnetic anomaly distribution between the simulation of the model and the observed data is verified. The comparison shows that the seabed cable can be effectively detected and identified with reasonable method.     

Spatio-temporal data model based on relational database system

In this paper, the entity-relation data model for integrating spatio-temporal data is designed. In the design, spatio-temporal data can be effectively stored and spatiao-temporal analysis can be easily realized.     

Recovery of bathymetry from altimeter data

At present, there exist two methods used to recover the bathymetry from altimeter data, i. e. the deterministic method and the stochastic method. In this paper, the principles of the two methods are introduced first. Then according to the theory of least-square collocation, a modified statistical model for recovering bathymetry from altimeter data is proposed. The new model has been used for computing the ocean depth in the South China Sea from altimeter-derived gravity anomalies. Finally the predicted depths are compared with the ship-borne depth. It shows that they agree with each other very well.