Color Variations on Eros from NEAR Multispectral Imaging

NEAR multispectral imaging was obtained at seven wavelengths (450-1050 nm) to characterize hemispheric and regional color properties of Eros. The highest-resolution whole-disk data, 180 m/pixel, were obtained during the last pre-orbit insertion sequence on 12 February 2000. The same areas were imaged again in color at 10-20 m/pixel from high orbit in March-April 2000, and selected targets have been studied in color at resolutions as high as 4 m/pixel from low orbit. Whole-disk spectra are in close agreement with ground-based observations. These and the disk-resolved measurements show little variation in visible-wavelength color, but they do reveal spatial variation of several percent in the 950-nm/760-nm reflectance ratio, used here as a proxy for depth of the 1-μm olivine-pyroxene absorption band. After photometric correction to i=30° e=0° using both a Hapke correction and a modified empirical phase function, the disk-resolved images show reproducible spatial variations in albedo and 950-nm/760-nm reflectance ratio. The northern hemisphere exhibits average reflectances at i=30°, e=0° of 0.136±0.007 at 760 nm and 0.115±0.006 at 950 nm, equivalent to geometric albedos of 0.30±0.02 and 0.26±0.02, respectively. There is more than factor of 2 spatial variation in reflectance, but only about 10% variation in the 950-nm/760-nm reflectance ratio. Reflectance and color ratio are highly correlated, with the highest reflectances in discrete, sharp-edged patches on slopes exceeding 20°, consistent with material being exposed by downslope movement. Eros is also conspicuously deficient in small, bright, spectrally distinctive craters which are found on the other two S asteroids, Gaspra and Ida, imaged by spacecraft at close range. Eros exhibits a larger range of albedos than other S asteroids, but its color variations are much more subtle: variation in the 950-nm/760-nm reflectance ratio with 760-nm reflectance is several times less than on those asteroids or in the lunar maria. Of the different mechanisms possibly responsible for reflectance and color differences on Eros, spatial differences in the extent of regolith aging by space weathering are most consistent with Eros's observed properties. However, the effects of this process are both qualitatively and quantitatively different than in the lunar maria.     

Controls on accumulation of a volcaniclastic fan,Ruapehu composite volcano,New Zealand

The Whangaehu fan is the youngest sedimentary component on the eastern ring plain surrounding Ruapehu volcano. Fan history comprises constructional (830–200 years bp) and dissectional (<200 years bp) phases. The constructional phase includes four aggradational periods associated with both syneruptive and inter-eruptive behavior. All four aggradational periods began when deposition by large lahars changed flow conditions on the fan from channelized to unchannelized. Subsequent behavior was a function of the rate of sediment influx to the fan. The rate of sediment influx, in turn, was controlled by frequency and magnitude of volcanic eruptions, short-term climate change, and the amount of sediment stored on the volcano flanks. Fanwide aggradation occurred when rates of sediment influx and deposition on the fan were high enough to maintaìn unchannelized flow conditions on the fan surface. Maintenance of an undissected surface required sedimentation from frequent and large lahars that prevented major dissection between events. These conditions were best met during major eruptive episodes when high frequency and magnitude eruptions blanketed the volcano flanks with tephra and rates of lahar initiation were high. During major eruptive episodes, volcanism is the primary control on sedimentation. Climatic variations do not influence sediment accumulation. Local aggradation occurred when lahars were too small to maintain unchannelized flow across the entire fan. In this case, only the major channel system received much sediment following the deposition from the initial lahar. This localized aggradation occurred if (1) the sediment reservoir on the flank was large enough for floods to bulk into debris flows and (2) sedimentation events were frequent enough to maintain sediment supply to only some parts of the fan. These conditions were met during both minor eruptive and inter-eruptive episodes. In both cases, a large sediment reservoir remained on the volcano flanks from previous major eruptive intervals. Periods of increased storm activity produced floods that bulked to relatively small debris flows. When the sediment reservoir was depleted, the fan entered the present dissectional phase. Syneruptive and noneruptive lahars are mostly channelized and sediment bypasses the fan. Fan deposits are rapidly reworked. This is the present case at Ruapehu, even though the volcano is in a minor eruptive episode and the climate favors generation of intense storm floods.     

Sediment focusing and210Pb dating: a new approach

In this paper we test the utility of the mud deposition boundary depth (mud DBD) theory (Rowanet al. 1992) as a means of maximizing sampling efficiency in paleolimnological investigations, particularly those that apply to²¹⁰Pb dating. The mud DBD is defined by the relationship between near bottom wave velocity and particle threshold velocity, with wave and particle threshold theory simplified to terms of exposure and depth. Mud DBD theory can be used to define the depositional zone in lakes, and within the depositional zone defined by the mud DBD: 1) there is a high probability of obtaining a representative core, 2) variation in mass sediment accumulation rate (MSAR) is not correlated with water depth, and 3) variation in MSAR is considerably reduced from the whole lake average. This suggests that mud DBD theory can account for the effects of sediment focusing, and that the mud DBD defined depositional zone is the zone to which fine-grained sediments are focused. Finally, we have shown that to optimize sampling effort, 5 to 10 cores within the depositional zone are necessary for a reasonably precise estimate of the mean mass sediment accumulation rate. In addition, the use of mud DBD theory prior to sampling can dramatically reduce the cost associated with analyzing large numbers of cores for²¹⁰Pb.This is the fifth of a series of papers to be published by this journal following the 20 ^th anniversary of the first application of²¹⁰Pb dating of take sediments. Dr P. G. Appleby is guest editing this series.     

A novel method to infer historical DDT use on Cape Cod,Massachusetts (USA), based on ΣDDT degradation and <Superscript>210</Superscript>Pb dating in lake sediment cores

Glacier shrinkage and melting of snow patches caused by the current phase of warming is having a profound impact on lake ecosystems located in glacierized environments at high altitude and/or latitude because it alters the hydrology and the physico-chemistry of the river discharges and catchment runoff. These changes, in turn, have a major impact on the biota of these lakes. In this study, we combined geochemical and diatom analyses of a sediment core retrieved from Lake Kanas (N.W. China) to assess how climate change has affected this ecosystem over the past ~ 100 years. Our results show that the aquatic ecosystem of Lake Kanas was sensitive to changes in the regional climate over that period of time. The lake has been affected by change in hydrology (e.g. influx of glacier meltwater, variations in precipitation) and change in hydrodynamics (water column stability). The variations in abundance and composition of the diatom assemblages observed in the sedimentary record have been subtle and are complex to interpret. The principal changes in the diatom community were: (1) a rise in diatom accumulation rates starting in the AD 1970s that is coeval with changes observed in temperate lakes of the Northern Hemisphere and (2) an increase in species diversity and assemblage turnover and a faster rate-of-change since ~ AD 2000. The diatom community is expected to change further with the projected melting of the Kanas glacier throughout the twenty-first century.     

Blended head analyses to reduce uncertainty in packer testing in fractured-rock boreholes

Open boreholes in fractured rock often cross-connect fractures with differing hydraulic head and the head differences between these fractures cause vertical flow in the water column. This cross-connection has potential to bias transmissivity (T) values obtained from straddle packer tests. This study demonstrates how measurements of the blended head in the open-hole segments above and below the straddle-packer test interval can be used to correct packer tests for cross-connection effects. A pressure response observed in the open-hole segment above and/or below the packers isolating a test interval during a hydraulic test indicates short-circuiting of water from the injection interval through the vertically connected fracture network to the open-hole segments, resulting in the overestimation of T. A method is presented using blended head concepts to minimize this error using a trial-and-error procedure to determine the short-circuiting flow rate to account for the head conditions in the open-hole segments during each hydraulic test. Observed differences between the measured head and the calculated blended head in the open-hole segments above and below the test interval are attributed to cross-connection effects around the 1-m-long packers. The head and corrected T values determined from packer tests are used to estimate the flow in and out of the open hole at each of the intervals tested for assessing the cross-connection effects under open borehole conditions. Understanding open-hole flow dynamics gives insight about the potential for vertical cross connection of chemical constituents caused by the open hole.     

Pliocene export production and terrigenous provenance of the Southern Cape Basin, southwest African margin

We have analyzed 33 Pliocene bulk sediment samples from Ocean Drilling Program Site 1085 in the Cape Basin, located offshore of western Africa in the Angola–Benguela Current system, for 17 major and trace elements, and interpreted their associations and temporal variations in the context of an allied data set of CaCO₃, opal, and C_org. We base our interpretations on elemental ratios, accumulation rates, inter-element correlations, and several multi-element statistical techniques. On the basis of qualitative assessment of downhole changes in the distributions of P and Ba, utilized as proxies of export production, we conclude that highs in bulk and biogenic accumulation that occur at 3.2 Ma, 3.0 Ma, 2.4 Ma, and 2.25 Ma were caused by increases in export production as well as terrigenous flux, and record a greater sequestering of organic matter during these time periods. Studies of refractory elements and other indicator proxies (SiO₂, Al₂O₃, TiO₂, Fe₂O₃, MgO, V, Cr, Sr, and Zr) strongly suggest that the terrigenous component of the bulk sediment is composed of two compositional end-members, one being ‘basaltic’ in composition and the other similar to an ‘average shale’. The basaltic end-member comprises approximately 10–15% of the total bulk sediment and its presence is consistent with the local geology of source material in the drainage basin of the nearby Orange River. The increase in bulk accumulation at 2.4 Ma appears to reflect a greater relative increase in basaltic input than the relative increase in shale-type input. Although studies such as this cannot precisely identify the transport mechanisms of the different terrigenous components, these results are most consistent with variations in sea level (and associated changes in shelf geometry and fluvial input) being responsible for the changing depositional conditions along the Angolan Margin during this time period.     

A multidisciplinary-based conceptual model of a fractured sedimentary bedrock aquitard: improved prediction of aquitard integrity

A hydrogeologic conceptual model that improves understanding of variability in aquitard integrity is presented for a fractured sedimentary bedrock unit in the Cambrian-Ordovician aquifer system of midcontinent North America. The model is derived from multiple studies on the siliciclastic St. Lawrence Formation and adjacent strata across a range of scales and geologic conditions. These studies employed multidisciplinary techniques including borehole flowmeter logging, high-resolution depth-discrete multilevel well monitoring, fracture stratigraphy, fluorescent dye tracing, and three-dimensional (3D) distribution of anthropogenic tracers regionally. The paper documents a bulk aquitard that is highly anisotropic because of poor connectivity of vertical fractures across matrix with low permeability, but with ubiquitous bed parallel partings. The partings provide high bulk horizontal hydraulic conductivity, analogous to aquifers in the system, while multiple preferential termination horizons of vertical fractures serve as discrete low vertical hydraulic conductivity intervals inhibiting vertical flow. The aquitard has substantial variability in its ability to protect underlying groundwater from contamination. Across widespread areas where the aquitard is deeply buried by younger bedrock, preferential termination horizons provide for high aquitard integrity (i.e. protection). Protection is diminished close to incised valleys where stress release and weathering has enhanced secondary pore development, including better connection of fractures across these horizons. These conditions, along with higher hydraulic head gradients in the same areas and more complex 3D flow where the aquitard is variably incised, allow for more substantial transport to deeper aquifers. The conceptual model likely applies to other fractured sedimentary bedrock aquitards within and outside of this region.