Formal definition and dating of the GSSP (Global Stratotype Section and Point) for the base of the Holocene using the Greenland NGRIP ice core,and selected auxiliary records

The Greenland ice core from NorthGRIP (NGRIP) contains a proxy climate record across the Pleistocene–Holocene boundary of unprecedented clarity and resolution. Analysis of an array of physical and chemical parameters within the ice enables the base of the Holocene, as reflected in the first signs of climatic warming at the end of the Younger Dryas/Greenland Stadial 1 cold phase, to be located with a high degree of precision. This climatic event is most clearly reflected in an abrupt shift in deuterium excess values, accompanied by more gradual changes in δ¹⁸O, dust concentration, a range of chemical species, and annual layer thickness. A timescale based on multi‐parameter annual layer counting provides an age of 11 700 calendar yr b2 k (before AD 2000) for the base of the Holocene, with a maximum counting error of 99 yr. A proposal that an archived core from this unique sequence should constitute the Global Stratotype Section and Point (GSSP) for the base of the Holocene Series/Epoch (Quaternary System/Period) has been ratified by the International Union of Geological Sciences. Five auxiliary stratotypes for the Pleistocene–Holocene boundary have also been recognised. Copyright © 2008 John Wiley & Sons, Ltd.     

Hydraulic properties of peat soils along a bulk density gradient—A meta study

Our understanding of hydraulic properties of peat soils is limited compared with that of mineral substrates. In this study, we aimed to deduce possible alterations of hydraulic properties of peat soils following degradation resulting from peat drainage and aeration. A data set of peat hydraulic properties (188 soil water retention curves [SWRCs], 71 unsaturated hydraulic conductivity curves [UHCs], and 256 saturated hydraulic conductivity [K_s] values) was assembled from the literature; the obtained data originated from peat samples with an organic matter (OM) content ranging from 23 to 97 wt% (weight percent; and according variation in bulk density) representing various degrees of peat degradation. The Mualem‐van Genuchten model was employed to describe the SWRCs and UHCs. The results show that the hydraulic parameters of peat soils vary over a wide range confirming the pronounced diversity of peat. Peat decomposition significantly modifies all hydraulic parameters. A bulk density of approximately 0.2 g cm^?3 was identified as a critical threshold point; above and below this value, macroporosity and hydraulic parameters follow different functions with bulk density. Pedotransfer functions based on physical peat properties (e.g., bulk density and soil depth) separately computed for bog and fen peat have significantly lower mean square errors than functions obtained from the complete data set, which indicates that not only the status of peat decomposition but also the peat‐forming plants have a large effect on hydraulic properties. The SWRCs of samples with a bulk density of less than 0.2 g cm^?3 could be grouped into two to five classes for each peat type (botanical composition). The remaining SWRCs originating from samples with a bulk density of larger than 0.2 g cm^?3 could be classified into one group. The Mualem‐van Genuchten parameter values of α can be used to estimate K_s if no K_s data are available. In conclusion, the derived pedotransfer functions provide a solid instrument to derive hydraulic parameter values from easily measurable quantities; however, additional research is required to reduce uncertainty.     

A paleoclimate record with tephrochronological age control for the last glacial-interglacial cycle from Lake Ohrid, Albania and Macedonia

Lake Ohrid is probably of Pliocene age, and the oldest extant lake in Europe. In this study climatic and environmental changes during the last glacial-interglacial cycle are reconstructed using lithological, sedimentological, geochemical and physical proxy analysis of a 15-m-long sediment succession from Lake Ohrid. A chronological framework is derived from tephrochronology and radiocarbon dating, which yields a basal age of ca. 136 ka. The succession is not continuous, however, with a hiatus between ca. 97.6 and 81.7 ka. Sediment accumulation in course of the last climatic cycle is controlled by the complex interaction of a variety of climate-controlled parameters and their impact on catchment dynamics, limnology, and hydrology of the lake. Warm interglacial and cold glacial climate conditions can be clearly distinguished from organic matter, calcite, clastic detritus and lithostratigraphic data. During interglacial periods, short-term fluctuations are recorded by abrupt variations in organic matter and calcite content, indicating climatically-induced changes in lake productivity and hydrology. During glacial periods, high variability in the contents of coarse silt to fine sand sized clastic matter is probably a function of climatically-induced changes in catchment dynamics and wind activity. In some instances tephra layers provide potential stratigraphic markers for short-lived climate perturbations. Given their widespread distribution in sites across the region, tephra analysis has the potential to provide insight into variation in the impact of climate and environmental change across the Mediterranean.     

Discrete simulations of a triaxial compression test for sand by DEM

A quasi‐static homogeneous drained triaxial compression test on cohesionless sand under constant lateral pressure was simulated using a three‐dimensional discrete element method. Grains were modelled by means of particle clusters composed of rigid spheres or spheres with contact moments imitating irregular particle shapes. Attention was paid to the effect of initial void ratio and grain shape mixture on the shear strength, volume changes, force chains, kinetic, elastic and dissipated energies. In addition, the effect of the mean grain size, grain size distribution, grain size range, specimen size and roughness and stiffness of boundaries was numerically analysed in initially dense sand. Some numerical results were compared with available experimental results. Copyright © 2014 John Wiley & Sons, Ltd.     

The reaction of carbonates in contact with laser-generated,superheated silicate melts: Constraining impact metamorphism of carbonate-bearing target rocks

We simulated entrainment of carbonates (calcite, dolomite) in silicate impact melts by 1-bar laser melting of silicate–carbonate composite targets, using sandstone, basalt, calcite marble, limestone, dolomite marble, and iron meteorite as starting materials. We demonstrate that carbonate assimilation by silicate melts of variable composition is extremely fast (seconds to minutes), resulting in contamination of silicate melts with carbonate-derived CaO and MgO and release of CO₂ at the silicate melt–carbonate interface. We identify several processes, i.e., (1) decomposition of carbonates releases CO₂ and produces residual oxides (CaO, MgO); (2) incorporation of residual oxides from proximally dissociating carbonates into silicate melts; (3) rapid back-reactions between residual CaO and CO₂ produce idiomorphic calcite crystallites and porous carbonate quench products; (4) high-temperature reactions between Ca-contaminated silicate melts and carbonates yield typical skarn minerals and residual oxide melts; (5) mixing and mingling between Ca- or Ca,Mg-contaminated and Ca- or Ca,Mg-normal silicate melts; (6) precipitation of Ca- or Ca,Mg-rich silicates from contaminated silicate melts upon quenching. Our experiments reproduce many textural and compositional features of typical impact melts originating from silicate–carbonate targets. They reinforce hypotheses that thermal decomposition of carbonates, rapid back-reactions between decomposition products, and incorporation of residual oxides into silicate impact melts are prevailing processes during impact melting of mixed silicate–carbonate targets. However, by comparing our results with previous studies and thermodynamic considerations on the phase diagrams of calcite and quartz, we envisage that carbonate impact melts are readily produced during adiabatic decompression from high shock pressure, but subsequently decompose due to heat influx from coexisting silicate impact melts or hot breccia components. Under certain circumstances, postshock conditions may favor production and conservation of carbonate impact melts. We conclude that the response of mixed carbonate–silicate targets to impact might involve melting and decomposition of carbonates, the dominant response being governed by a complex variety of factors.     

Phyllocladane in brown coal from Handlová, Slovakia: Isolation and structural characterization

Aliphatic diterpenes were isolated from brown coal from Handlová, Slovakia, using microwave assisted extraction of mechanically activated coal powder. The parameters of the extraction procedure were optimized to get the target compounds in high yield. The total extract was separated using adsorption chromatography. GC–MS revealed tetracyclic and tricyclic diterpanes in the aliphatic fraction; they were identified as 16α(H)-phyllocladane (83%), isopimarane (11%), 18-norisopimarane (4%), abietane (2%) and fichtelite (<0.1%). It was found that more than 2 g of the most abundant diterpane, 16α(H)-phyllocladane could be extracted from 1 kg of Handlová coal. Because of the scarcity of relevant analytical data, 16α(H)-phyllocladane was thoroughly characterized by spectroscopic and chromatographic methods. A complete set of ¹H and ¹³C NMR data is given including their comparison with published values and ab initio calculations. EI mass and IR spectra of 16α(H)-phyllocladane are shown and discussed. Kováts retention indices measured on two common GC stationary phases are also given.     

Composition and sources of extractable organic matter from a sediment core in Lake Kivu,East African rift valley

Lake Kivu is a gas-charged East African rift lake with currently anoxic bottom water. The extractable compounds and residual organic matter of a short sediment core have δ¹³C values typical of lacustrine microbial detritus. The total extracts consist primarily of polar compounds such as n-alkanoic acids, hydroxyalkanoic acids, triterpenoids, steroids and monosaccharides, with minor amounts of n-alkanes and n-alkanols. These tracer compounds and δ¹³C values indicate that the organic matter in the surficial and deeper sedimentary record was dominated by bacterial sources. The sapropelic sediment between these horizons contains organic matter from primarily algal with lesser bacterial input. Terrestrial organic markers are minor in all samples. The major fractions of the compounds in the total extracts were oxidized in the upper water column prior to transit through the anoxic bottom water to sedimentary deposition. The sapropelic horizon may reflect lake water turnover with ventilation or hydrothermal activity and consequently increased algal blooms.     

Molecular fossils from chemical degradation of macromolecular organic matter

Hydrogenolysis with rhodium-on-charcoal was found to be an effective method for degrading different types of macromolecular material of geological origin. Between 6 and 70% of coals, kerogens and humic substances were transferred into low-molecular-weight soluble materials. The reaction products contained a series of monomeric and dimeric lignin-derived compounds which strongly suggest intact fossil lignin as their source. The substitutional patterns of the released phenols reflect the type and amount of terrestrial organic matter input and diagenetic alterations.In addition to the lignin constituents, a complete suite of hydrocarbons differing from those of the low-molecular-weight fraction was obtained after hydrogenolysis of the sample material. Hydrocarbons released by the hydrogenolytic degradation technique were attached to the polymeric matrix as monoor polyethers. Deuterium was used in the degradation experiment to evaluate the sites of chemical bonds by which 4-methylsteranes and hopanes are attached to the kerogen matrix. These experiments suggested a linkage of the released molecules with ring A and the side-chain, respectively.     

Upward continuation of Markov type anomalous gravity potential models

Linear gravity field state space models are still a useful tool to model the anomalous gravity field in vector gravimetry, airborne gravimetry, inertial geodesy and navigation. This paper deals with an idea ofJordan and Heller (1978) to solve analytically the upward continuation problem of Markov gravity models.In contrary to the standard Markov shaping filter approach the height dependency of the covariance function, i.e. variance factor and correlation length as function of height, is strictly introduced in state space and not neglected. Using some basic integral transforms, a general upward continuation integral is derived for the n-th order Markov process. The upward continuation integral is solved for the special and practically important case of 2nd order Markov process in very detail. This leads to the introduction of the special sine and cosine integral functions into the the mathematical covariance model. The features of the covariance model are analyzed analytically and the height dependency is discussed numerically.     

Communicating landscape hydrology — the water cycle in a box

Physical models are a well‐established tool in education to strengthen hydrological understanding. They facilitate the straightforward visualization of hydrological processes and allow the communication of hydrological concepts, research and questions of general interest to the public. In order to visualize the water cycle in a landscape of postglacial sediments, in particular the subsurface part, a physical model was constructed. In two videos, (1) a detailed construction manual and (2) visualization examples of hydrological concepts and processes are presented. With our contribution, we like to encourage professionals in the field of hydrology to share methods and tools of knowledge transfer and communication of hydrological concepts. Copyright © 2016 John Wiley & Sons, Ltd.