Middle miocene deduction and late miocene beginning of collision registered in the hengchun peninsula: Geodynamic implications for the evolution of Taiwan

Taiwan is located in the axis of the Manila Trench. It results from an oblique collision between the northernmost part of the Luzon arc and the Chinese passive margin. This active collision follows the subduction of the Oligocene-Miocene oceanic crust of the South China Sea along the Manila Trench. The tectonized Chinese margin emerged in the Hengchun peninsula (South Taiwan). Gentle folds which are delineated by the Quaternary reefal limestones demonstrate Recent deformations. These folds deformed a thick detrital sequence of Miocene age (Ssuchung Chi series) which was previously strongly folded and thrust westward (axis NS-N20) upon the Renting mélange of Latest Miocene age. These main deformations, sealed by the Middle Pliocene, are the evidence for the onset of collision in this part of Taiwan at the end of the Miocene. Because of its obliquity, the collision started already in the northern part of Taiwan during the Late Miocene (6-7-8 Ma ?).The Ssuchung Chi series, a sequence of proximal turbidites, has contained, since the Middle Miocene (NN 6~13 Ma), fragments of an Oligocene to Lower Miocene oceanic crust. This ophiolitic material is very similar to the East Taiwan Ophiolite of the Coastal Range. It originated most probably from a slice of South China Sea crust obducted in Middle Miocene times (13–14 Ma) upon the Chinese margin (North of the Hengchun peninsula). This obduction occurred 7 to 8 Ma before the beginning of collision. These results make it possible to propose an evolutionary model for Taiwan from the Oligocene to the Recent, with the different phases of a collision between a volcanic arc and a passive margin.     

In situ tensile fracture toughness of surficial cohesive marine sediments

This study reports the first in situ measurements of tensile fracture toughness, K _IC, of soft, surficial, cohesive marine sediments. A newly developed probe continuously measures the stress required to cause tensile failure in sediments to depths of up to 1 m. Probe measurements are in agreement with standard laboratory methods of K _IC measurements in both potter’s clay and natural sediments. The data comprise in situ depth profiles from three field sites in Nova Scotia, Canada. Measured K _IC at two muddy sites (median grain size of 23–50 μm) range from near zero at the sediment surface to >1,800 Pa m^1/2 at 0.2 m depth. These profiles also appear to identify the bioturbated/mixed depth. K _IC for a sandy site (>90% sand) is an order of magnitude lower than for the muddy sediments, and reflects the lack of cohesion/adhesion. A comparison of K _IC, median grain size, and porosity in muddy sediments indicates that consolidation increases fracture strength, whereas inclusion of sand causes weakening; thus, sand-bearing layers can be easily identified in K _IC profiles. K _IC and vane-measured shear strength correlate strongly, which suggests that the vane measurements should perhaps be interpreted as shear fracture toughness, rather than shear strength. Comparison of in situ probe-measured values with K _IC of soils and gelatin shows that sediments have a K _IC range intermediate between denser compacted soils and softer, elastic gelatin.     

The mesoscale variability in the Caribbean Sea. Part I: Simulations and characteristics with an embedded model

The variability in the Caribbean Sea is investigated using high resolution (1/15°) general circulation model experiments. For the first time in this region, simulations were carried out with a 2-way nested configuration of the NEMO primitive equation model. A coarse North Atlantic grid (1/3°) reproduces the main features of the North Atlantic and Equatorial circulation capable of influencing ocean dynamics in the Caribbean Sea. This numerical study highlights strong dynamical differences among basins and modifies the view that dynamics are homogeneous over the whole Caribbean Basin. The Caribbean mean flow is shown to organize in two intense jets flowing westward along the northern and southern boundaries of the Venezuela Basin, which merge in the center of the Colombia Basin. Diagnostics of model outputs show that width, depth and strength of baroclinic eddies increase westward from the Lesser Antilles to the Colombia Basin. The widening and strengthening to the west is consistent with altimetry data and drifter observations. Although influenced by the circulation in the Colombia Basin, the variability in the Cayman Basin (which also presents a westward growth from the Chibcha Channel) is deeper and less energetic than the variability in the Colombia/Venezuela Basins. Main frequency peaks for the mesoscale variability present a westward shift, from roughly 50 days near the Lesser Antilles to 100 days in the Cayman Basin, which is associated with growth and merging of eddies.     

Distribution of the organic matter in the channel-levees systems of the Congo mud-rich deep-sea fan (West Africa). Implication for deep offshore petroleum source rocks and global carbon cycle

The quantity and the source of organic matter preserved in the Recent turbiditic channel-levees systems around 4000 m-depth off the Congo River were determined using bulk geochemical approaches (Rock-Eval, elemental and isotopic analyses) as well as molecular and optical analyses on selected samples. These mud-rich sediments contain high amount of organic matter (3% Corg on average), the origin of which is a mixture of terrestrial higher-plant debris and deeply oxidized phytoplanktonic material. Although the relative contribution of continental source versus marine source of the organic matter cannot be precisely quantified, the continental fraction appears significant (at least 70–80%) especially for such depths and distances from the coast. The organic matter distribution appears very homogeneous at different scales, from the single turbiditic event to the entire levee, and changes in accumulation rates have a little impact on the quantity and quality of preserved organic matter.     

On the use of Atterberg limits on marine soils

Abstract

On the basis of the Atterberg indexes of various sediments collected in the Mediterranean Sea, we select two major parameters indicative of the mechanical behavior of marine soils: the sedimentary facies (i.e., mechanism of deposition expressed by silt content) and the clay mineral association characterized by smectite content in the fraction finer than 2 μm. Activity and real thixotropic ability appear to be particularly important parameters in marine engineering; better values are obtained by a double test operation in distilled and marine water.     

Small-scale, high-precision and high-accuracy determination of Poisson’s ratios in cohesive marine sediments

Poisson’s ratio (static) appears as a parameter in models of soft-sediment geomechanical processes such as gas bubble formation and bioturbation, and in a number of practical applications, including acoustic imaging, but is rarely measured in soft near-surface (upper 20 cm) marine sediments. A new uniaxial apparatus was developed to assess Poisson’s ratios of cylindrical samples of soft cohesive sediments under finite-strain, unconfined, undrained conditions. No constraining membrane around the sample is necessary in the instrument. By monitoring the fluid level in a capillary, changes in sample volume can be determined to high precision (reproducibility). Measurements on reference materials, i.e., gelatine and polyurethane, also indicate high accuracy (veracity). For natural sediments from Nova Scotia, Canada, Poisson’s ratios range from 0.4951 to 0.5 with no indication of anisotropy; therefore, such sediments act as incompressible solids to short-term/small-magnitude stresses, as occur during bubble formation and infaunal movement.     

Prolonged Magmatic and Tectonic Development of the Caribbean Igneous Province Revealed by a Diving Submersible Survey

Using the diving submersible survey NAUTICA we investigated the central part of the Caribbean large igneous province (CLIP) to observe and sample internal portions of this proposed oceanic plateau. Most of the samples are gabbroic and doleritic rocks; basalts are scarce. Radiometric dating by ⁴⁰Ar/³⁹Ar incremental heating experiments indicate that the intrusive rocks are Campanian in age (81–75 Ma). In some places these intrusive rocks underlie older Santonian (85–83 Ma) extrusive basaltic rocks, suggesting that the Campanian rocks represent a sill injection and an underplating episode. Results of the diving program supplemented by information from ODP and DSDP drilling sites document a 20 m.y. period (94–75 Ma) of igneous activity in the submerged portion of the Caribbean large igneous province (CLIP). In the northern part of the Beata Ridge late Campanian and/or post Campanian uplift is documented by prominent Maastrichtian (71–65 Ma) erosion and the establishment of a Paleocene-middle Eocene (65–49 Ma) carbonate platform. During and after the uplift an extensional period is indicated by seismic images and the subsidence (3 km depth) of the carbonate platform. Paleocene ages (55–56 Ma) determined on some volcanic samples are attributed to localised decompression mantle melting that accompanied the extension. We document a prolonged period of magmatic and tectonic events that do not fit with the current models of short-lived plateau formation during mantle plume initiation but shares many similarities with the constructional histories of other oceanic large igneous provinces.     

Effect of dispersion on impulsive waves

The generation and propagation of surface waves resulting from suddenly created disturbances over water surfaces is investigated. The initial boundary conditions defining the disturbance are given either by a velocity of the free surface, an initial elevation of the free surface or a pressure impulsively applied on the free surface. It is shown that the corresponding three forms of solutions are related by a simple time derivative. Linear solutions are obtained in the cases where the wave motion is assumed to be nondispersive, mildly dispersive and fully dispersive, as well as in the case where the motion is given by the method of stationary phase. Criteria are established to indicate the limit of validity of each method.     

Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.