The effect of specimen size and stress rate for the Brazilian test—A statistical analysis

Summary The Brazilian test is a widely accepted method for the determination of the tensile strength of intact rock. Specifications for the Brazilian tensile strength test have been established by the American Society for Testing and Materials (ASTM), ASTM D 3967-86 and a suggested approach is provided by the International Society for Rock Mechanics (ISRM). The ASTM and ISRM allow a relatively wide range of values for specimen geometry defined in terms of length to diameter ratio and loading rates defined as either time to failure or stress rate.A statistical study was carried out on a coal measure sandstone to determine whether the tensile strength determined by the Brazilian test is independent of the specimen geometry and the stress rate.     

Incompatible element and isotopic evidence for tectonic control of source mixing and melt extraction along the Central American arc

The Sr and Nd isotopic ratios of Central American volcanics can be described by the mixing of four components, marine sediment from DSDP Site 495, MORB-source mantle (DM), EMORB-source mantle (EM), and continental crust. Most of the isotopic data define a trend between EM and a modified mantle (MM) formed as a mixture of DM and less than 0.5% marine sediment, or fluid derived there from. The MM to EM trend is equally apparent in the incompatible-element data and is most clearly seen in a Ba/La versus La/Yb plot. A hyperbolic trend connects high Ba/La and low La/Yb at the MM end of the trend to low Ba/La and high La/Yb at the EM end. Smooth regional variations in incompatible-element and isotopic ratios correlate with the dip of the subducted slab beneath the volcanic front and the volume of lava erupted during the last 100,000 years (volcanic flux). Steep dip and low flux characterize the MM end-member and shallow dip and high flux characterize the EM end-member. The simplest model to explain the linked tectonic and geochemical data involves melting in the wedge by two distinct mechanisms, followed by mixing between the two magmas. In one case, EM magma is generated by decompression of EM plus DM asthenosphere, which is drawn in and up toward the wedge corner. EM mantle is preferentially melted to small degrees because of the presence of low melting components. The second melt is formed by release of fluid from the subducted slab beneath the volcanic front to form MM magma. Mixing between EM and MM magmas is controlled by subduction angle, which facilitates delivery of EM magma to the volcanic front at low-dip angles and impedes it at steep-dip angles.     

Rock mass characterization using photoanalysis

Summary Rock formations are distinguished from each other by measuring first the properties of the intact rock, and second those of the jointing. Whereas simple methods are available for measuring intact rock properties, those available for measuring jointing remain slow, expensive, and sometimes dangerous. Digitized photographs (photoanalysis) may provide a solution. In this paper, the new techniques of photoanalysis are reviewed together with applications, promising areas for research, and also some obstacles that remain to be overcome. Aspects of the rock mass that lend themselves to photoanalytical measurement include those of individual joints, such as persistence, orientation and roughness, and those relating to the mass as a whole, such as block size and the spacing or intensity of jointing. Photoanalysis can also be applied to measurement of blasting. It allows characterization of the rock about to be blasted, helping the engineer to predict fragmentation and to design an appropriate blasting pattern. Afterwards, the same methods can be used to measure fragmentation, overbreak and backbreak, for quality control and for diagnosis of problems.Presented at the 28th US ROck Mechanics Symposium, Tucson, Arizon, 29 June–1 July 1987.     

Release of organic nitrogen compounds from Kerogen via catalytic hydropyrolysis

High hydrogen pressure pyrolysis (hydropyrolysis) was performed on samples of solvent extracted Kimmeridge Clay Formation source rock with a maturity equivalent to ca. 0.35% vitrinite reflectance. We describe the types and distributions of organic nitrogen compounds in the pyrolysis products (hydropyrolysates) using GC-MS. Compounds identified included alkyl-substituted indoles, carbazoles, benzocarbazoles, quinolines and benzoquinolines. The distributions of the isomers of methylcarbazoles, C₂-alkylcarbazoles and benzocarbazoles in the hydropyrolysates were compared to a typical North Sea oil. The hydropyrolysates compared to the North Sea oil, showed increased contributions from alkylcarbazole isomers where the nitrogen group is "exposed" (no alkyl substituents adjacent to the nitrogen functionality) and appreciable levels of benzo[b]carbazole relative to benzo[a]- and benzo[c]carbazoles. Hydropyrolysis is found to be an ideal technique for liberating appreciable quantities of heterocyclic organic nitrogen compounds from geomacromolecules. The products released from the immature Kimmeridge Clay are thought to represent a potential source of nitrogen compounds in the bound phase (kerogen) able to contribute to the free bitumen phase during catagenesis.     

Direct visualization of clay microfabric signatures driving organic matter preservation in fine-grained sediment

We employed direct visualization of organic matter (OM) sequestered by microfabric signatures in organo-clay systems to study mechanisms of OM protection. We studied polysaccharides, an abundant class of OM in marine sediments, associated with the nano- and microfabric of clay sediment using a novel application of transmission electron microscopy, histochemical staining (periodic acid-thiosemicarbazide-silver proteinate), and enzymatic digestion techniques. We used two experimental organo-clay sediment environments. First, laboratory-consolidated sediment with 10% chitin (w/w) added was probed for chitin before and after digestion with chitinase. Second, fecal pellets from the polychaete Heteromastus filiformis were used as a natural environment rich in clay and polysaccharides. Sections of this material were probed with silver proteinate for polysaccharides before and after digestion with a mixture of enzymes (amylase, cellulase, chitinase, dextranase, and pectinase). In both environments, chitin or other polysaccharides were found within pores, bridging clay domains, and attached to clay surfaces in undigested samples. Digested samples showed chitin or polysaccharides more closely associated with clay surfaces and in small pores. Our results imply protective roles for both sorption to clay surfaces and encapsulation within clay microfabric signatures.     

A sample preparation guide for clay-rich carbonaceous chondrites

The matrix of the C2-ungrouped Tarda meteorite contains abundant smectite minerals that swell and crumble when exposed to polar liquids, causing the sample to rapidly slake. This phenomenon presents a serious challenge when polishing the meteorite, as common polishing liquids used on carbonaceous chondrites, such as water, ethanol, ethylene glycol, and isopropyl alcohol, are polar and will cause the sample to swell, making it unsuitable for some analyses. Hexane and mineral oil are nonpolar liquids that were found to not induce swelling on highly expansive montmorillonite-clay analog material and were effectively integrated into a polishing procedure for Tarda. Here, we detail a procedure for mounting, cutting, and polishing the Tarda meteorite to prepare a surface that is suitable for a variety of sensitive techniques, such as electron microprobe analysis. This work offers a practical methodology for the preparation of other clay-rich samples, which may include the recently returned Ryugu and Bennu materials.     

Developmental evaluation of a potential non-steroidal estrogen: triclosan.

Triclosan is an antibacterial agent commonly used in industry and often detected in waste-water effluent. The potential of triclosan to act as an endocrine disruptor was examined because its chemical structure closely resembles known non-steroidal estrogens (e.g. DES, bisphenol A). Japanese medaka fry (Oryzias latipes) were exposed for 14 days beginning 2 days post-hatch to triclosan (100, 10, 1 micrograms/l), 17-beta estradiol (E2; 1 microgram/l), or a solvent control (ethanol). Two months post-exposure, the phenotypic sex of each adult was assessed visually using sexually dimorphic fin shape and size. The proportion of females in each group was similar for triclosan-exposed animals and solvent-treated controls (ethanol 53%, 1 ppb 58%, 10 ppb 45%, 100 ppb 36%) although E2 treatment did produce 92% female adults. Sexually dimorphic fin traits were quantified to look for potential effects of triclosan and E2 on the development of secondary sexual characters. These results do not support the hypothesis that triclosan is potently estrogenic. However, changes in fin length and non-significant trends in sex ratio suggest triclosan is potentially weakly androgenic.     

Shipping noise in a dynamic sea: a case study of grey seals in the Celtic Sea

Shipping noise is a threat to marine wildlife. Grey seals are benthic foragers, and thus experience acoustic noise throughout the water column, which makes them a good model species for a case study of the potential impacts of shipping noise. We used ship track data from the Celtic Sea, seal track data and a coupled ocean-acoustic modelling system to assess the noise exposure of grey seals along their tracks. It was found that the animals experience step changes in sound levels up to ~ 20 dB at a frequency of 125 Hz, and ~ 10 dB on average over 10–1000 Hz when they dive through the thermocline, particularly during summer. Our results showed large seasonal differences in the noise level experienced by the seals. These results reveal the actual noise exposure by the animals and could help in marine spatial planning.     

Diet composition of New Zealand’s endemic rough skate,Zearaja nasuta

Diet analysis can provide an insight into the structure and function of an ecosystem, and can be used in ecosystem-based frameworks to inform management and conservation decisions. Diet composition of rough skate (Zearaja nausta) from the south east coast of New Zealand, was investigated for the first time. We examined 35 stomachs from three trawls between March and June 2017. Prey importance was assessed by a prey specific index of relative importance (PSIRI). This population of rough skates (n?=?32) was found to be specialised feeders, primarily preying on one species, Nectocarcinus antarcticus. This study provides the first insight into rough skate trophic interactions in the surrounding marine community.     

Meta-igneous (non-gneissic) tonalites and quartz-diorites from an extensive ca. 3800 Ma terrain south of the Isua supracrustal belt, southern West Greenland: constraints on early crust formation

In the Itsaq Gneiss Complex south of the Isua supracrustal belt (West Greenland) some areas of early Archaean tonalite and quartz-diorite are non-gneissic, free of pegmatite veins, and in rarer cases are undeformed with relict igneous textures and hence were little modified by heterogeneous ductile deformation under amphibolite facies conditions in several Archaean events. Such well-preserved early Archaean rocks are extremely rare. Tonalites are high Al, and have bulk compositions close to experimental liquids. Trace element abundances and modelling suggest that they probably originated as melts derived from basaltic compositions at sufficiently high pressures to require residual garnet + amphibolites ± clinopyroxene in the source. The major element characteristics of the quartz-diorites suggest these were derived from more mafic magmas than the tonalites, and underwent either igneous differentiation or mixing with crustal material. As in modern arc magmas, high relative abundances of Sr, Ba, Pb, and alkali elements cannot be generated simply from a basaltic source formed by large degrees of melting of a depleted mantle. This may indicate an important role for fluids interacting with mafic rocks in generating the earliest preserved continental crust. The high Ba/Th, Ba/Nb, La/Nb and low Nb/Th, Ce/Pb, and Rb/Cs ratios of these tonalites are also observed in modern arc magmas. SHRIMP U-Pb zircon geochronology was undertaken on seven tonalites, one quartz-diorite, a thin pegmatitic vein and a thin diorite dyke. Cathodoluminescence images show the zircon populations of the quartz-diorite and tonalites are dominated by single-component oscillatory-zoned prismatic grains, which gave ages of 3806 ± 5 to 3818 ± 8 Ma (2σ) (quartz-diorite and 5 tonalites) and 3795 ± 3 Ma (1 tonalite). Dating of recrystallised domains cutting oscillatory-zoned zircon indicates disturbance as early as 3800–3780 Ma. There are rare ca. 3600 Ma and 3800–3780 Ma (very high U and low Th/U) ≤ 20 μm wide partial overgrowths on the prismatic grains. Given likely Zr-undersaturation of precursor melts and evidence of zircon recrystallisation and metamorphic regrowth as early as 3800–3780 Ma, the age determinations on the prismatic oscillatory-zoned zircon populations give the igneous crystallisation age of the tonalite and quartz-diorite protoliths. When the coherency of the geochemistry is considered, these samples represent the best preserved suites of ca. 3800 Ma felsic igneous rocks yet documented. Received: 1 December 1998 / Accepted: 23 July 1999