Neotectonic effects on sinuosity and channel migration,Belle Fourche River,Western South Dakota

Short-term instability in the behaviour of a small, meandering alluvial channel is identified from the relation between sinuosity and either floodplain slope or channel slope within 17 reaches along an 81-kilometre section of the Belle Fourche River in western South Dakota. In reaches 1 to 4 and 11 to 17 the channel is relatively stable and sinuosity varies inversely with channel slope. In reaches 5 to 10, sinuosity is positively related to floodplain slope. Sinuosity increases markedly in reaches 5, 6, and 7 (which are immediately downstream from a discontinuity in the long profile of the floodplain) in association with an increase in floodplain slope. Immediately upstream from the discontinuity, bankfull channel depth and sinuosity decrease and the area of the floodplain reworked by meander migration between 1939 and 1981 increases, in association with a decrease in floodplain slope. Channel behaviour in reaches 5 to 10 is best explained as a consequence of neotectonic activity, as indicated by changes in elevation recorded along geodetic survey lines that cross lineaments that may delimit the eastern boundary of the Black Hills uplift. Sinuosity acts as a barometer of the effects of neotectonic activity on alluvial channels. Initial indications of channel and floodplain instability due to neotectonic activity may be derived from evidence of anomalously active channel migration, as documented from photographic or topographic sources.     

Chemical Characterisation of Geological Raw Materials Used in Traditional Ceramics

A wide range of natural raw materials is used in the manufacture of traditional ceramic products such as ceramic tiles, frits, glazes and pigments. The chemical composition of these raw materials needs to be strictly controlled to assure end-product quality and enable the identification of the origin of defects caused by impurities or contamination. Six types of ceramic raw materials (silica sand, clays and kaolin, feldspars and related minerals, calcium and magnesium carbonates, sodium and calcium borates, and zirconium silicates) have been analysed in this study. X-ray fluorescence (XRF), potentiometry, coulometry and atomic absorption spectrometry (AAS) were used in this chemical characterisation. A methodology has been established for characterising each studied raw material, by identifying the chemical elements to be determined, selecting the most appropriate technique and validating each measurement. The reference materials used for validation were BCS CRM 267, 313/1, 393 and 388 (BAS), GBW 03103, GBW 07404, NIST SRM 181, 201a and 1835, Euronorm CRM 782-1 and Syenite SY-2. The results showed that most of the elements present in the geological samples used as traditional ceramic raw materials could be determined by XRF. The determination of light elements, such as lithium, fluorine and boron, is more suitably conducted by ICP-AES/AAS, potentiometry or potentiometry/ICP-AES respectively. Organic and inorganic carbon could be determined by coulometry. Inorganic carbon (CO₂) could also be determined by coulometry or by thermogravimetry, if samples did not contain clay minerals. Loss on ignition was always determined by gravimetry.     

The limitations of three-dimensional kinematic vorticity analysis

The kinematic vorticity number (W_k) can be calculated for three-dimensional as well as two-dimensional geologic deformations. For steady-state deformations, W_k can be correlated to and analyzed in terms of finite strains. The analysis shows that assumptions commonly made for two-dimensional deformations are not applicable to three-dimensional deformations. A single W_k describes an infinite number of three-dimensional deformations. Further, even knowledge of flow apophyses orientation, instantaneous stretching axes orientation, and/or W_k are not sufficient to describe deformation. Three-dimensional deformations also require knowledge of the deformation ‘type’ or boundary conditions of deformation (e.g. transpression). Hence, in addition to being difficult to estimate, the value of knowing W_k for three-dimensional deformations is greatly reduced compared with plane strain. The most useful methods of determining W_k from naturally deformed rocks are presented.     

On the observed synoptic variability in the thermal structure of the upper northern Bay of Bengal during MONEX-79

The short-term variability observed in the near surface meteorological parameters and in the vertical thermal structure of the upper layers of the northern Bay of Bengal during a weak monsoonal regime is examined with the aid of time series measurements. The variability of the mixed layer depth is interpreted in terms of forced mixing caused by the surface wind stress and free mixing by buoyancy flux, Ekman pumping controlled by the curl of the surface wind stress, convergence associated with a clockwise gyral circulation and stratification caused by freshwater discharges from rivers. The daily-averaged current vectors in the upper layers indicate the presence of clockwise gyral circulation in the polygon area.     

Typology of segregated (armoured/paved) surfaces: Some comments

A review of the characteristics of segregated surfaces and consideration of the origins of the terms armoured and paved suggests that the two terms are interchangeable, and that neither term is specifically associated with a particular segregation process. The dichotomy between segregated surfaces which are formed in channels in which the entire range of bed material is mobile under the prevailing hydrologic regime, and segregated surfaces which are intrinsically stable, forms the basis of an elementary distinction between different types of segregated surface. It is suggested that the term stable armour or stable pavement be applied to those cases where the segregated surface is considered to be inactive under the prevailing hydrologic regime, and that the term unstable armour or unstable pavement be applied to cases where the segregated surface experiences periodic mobilization.     

Mechanisms and duration of non-tectonically assisted magma emplacement in the upper crust: The Black Mesa pluton, Henry Mountains, Utah

A new study of Black Mesa pluton (Henry Mountains, Colorado Plateau, Utah, USA) indicates that it is a classic example of a small upper-crustal pluton assembled over a few years by incremental amalgamation of discrete magma pulses. The results of our petrostructural study of the pluton interior allow us to constrain the geometry, kinematics and timing of the processes. The symmetric internal fabric is interpreted as an evidence for a feeding by below and not laterally. The observed rotation of the lineation, from WNW–ESE on the very top to NNE–SSW below, lead us to propose that the fabric at the base of the pluton is a record of magma infilling process, and the fabric at the very top is a record of the strain due to the relative movement between magma and wallrocks. A consequence is that except at the contact between pluton and wallrocks (top and margins), the stretching direction, recorded by the lineation, is not parallel to the flow direction of the magma i.e. displacement. The Black Mesa pluton is a sheeted laccolith on its western edge and a bysmalith on its eastern edge. This E–W asymmetry in pluton geometry/construction and the symmetrical internal fabric indicates that the apparently different west and east growth histories could have occurred simultaneously. Our field data indicate pluton growth through an asymmetric vertical stacking of sill-like horizontal magma sheets.One-dimensional thermal models of the pluton provide maximum limits on the duration of its growth. We have constrained the number, the thickness, and the frequency of magma pulses with our structural observations, including: (1) the emplacement of the pluton by under-accretion of successive magma pulses, (2) the absence of solid-state deformation textures at internal contacts, and (3) the apparent absence of significant recrystallization in the wallrocks. Our results suggest that the emplacement of the Black Mesa pluton was an extremely rapid event, with a maximum duration on the order of 100 years, which requires a minimum vertical displacement rate of the wallrocks immediately above the pluton greater than 2 m/yr. Finally, our data show that the rates of plutonic and volcanic processes could be similar, a significant result for interpretation of magma transfer in arc systems.     

Residence time of alluvium in an aggrading fluvial system

Relationships between the surface area and age of alluvial deposits were used to estimate the residence time of alluvium in the 2205 km² Waipaoa River basin, New Zealand. The contemporary Waipaoa River is an efficient transporter of sediment to the continental shelf, but the basin has been characterized by rapid channel and valley aggradation in the historic period, and by extensive mid‐ to late Holocene alluvial storage in the lower reaches. The area‐weighted mean age of alluvial deposits in the lower part of the river basin is ～4400 yr. These deposits comprise terrace remnants isolated by downcutting, and Holocene to Recent sediments that are potentially remobilizable by the modern river. Even though the amount of storage is small relative to downstream transport, the majority of the potentially remobilizable alluvium is likely to remain in storage for >100 yr, and its half‐life (time for 50 per cent removal) is >2000 yr. Within the confines of the flfloodplain, the apparent ‘loss’ of older deposits is due primarily to burial, but losses of the most recent deposits are due almost entirely to remobilization (30–40 per cent), with the remainder preserved in the alluvial record for at least 10⁴ yr. Most of this sediment is likely to remain in storage until there is a shift to a degradational state. Copyright © 2006 John Wiley & Sons, Ltd.     

Treatment of vinasse by electrochemical oxidation: evaluating the performance of boron-doped diamond (BDD)-based and dimensionally stable anodes (DSAs)

The removal of colour and organic compounds from vinasses derived from the wine distillery industry was studied using boron-doped diamond-based electrodes and dimensionally stable anodes. The maximum reduction of organic compounds and colour was attained with the use of boron-doped diamond-based electrode after 10 h of operation at a current density of 6.6 mA cm^?2. The current efficiency obtained was about 90% with a specific energy consumption (measured in terms of removal of chemical oxygen demand) of 17 kWh kg^?1 COD removed. The dimensionally stable anodes were capable of removing 6–47% of the organic material and reached 60% decolourisation but with a lower current efficiency (between 85 and 10%) and much higher specific energy consumption values. The anaerobic digestion of vinasse after 1 h of treatment using boron-doped diamond-based electrode showed an effective mineralisation of the organic matter contained in the sample leading to an increase in methane production during anaerobic digestion.