Supra-subduction affinity in the Neoproterozoic serpentinites in the Eastern Desert, Egypt: Evidence from mineral composition

Serpentinites in the Eastern Desert (ED) of Egypt represent integral components of the ophiolites. Metamorphic textures of the serpentinites preserve the complex mineralogical evolution from primary peridotite through metamorphism, and late-stage hydrothermal alteration. Two textural types are distinguished in the olivines of the present serpentinized peridotites, namely (a) highly-strained olivine grains with kink bands, as in the deformed mantle tectonites from ophiolites, and (b) non-strained grains. The latter may represent recrystallized crystals during later thermal metamorphic events due to the intrusion of granite. On the basis of X-ray diffraction analysis, antigorite is the main serpentine minerals with lesser chrysotile and lizardite which indicates that serpentinites were formed under prograde metamorphism. Relict primary minerals of the serpentinites are Cr-spinel, olivine and pyroxene. Chrome spinel relicts have high Cr# (0.60–0.80), whereas primary olivines are Mg-rich nature (Fo = 89–96). Geochemical compositions of serpentinites indicate that they formed not at mid-ocean ridges but at spreading centers associated with subduction zones and this could have happened in a supra-subduction zone either in the fore-arc or back-arc environments. Mineral compositions of primary chrome spinels and olivines are similar to those of modern fore-arcs. High Cr# in the relict chrome spinels and Fo in the primary olivines of serpentinites indicate that they are residual after extensive partial melting and originated by sea-floor spreading during subduction initiation.     

Geochemistry and environmental impacts of retorted oil shale from Jordan

Physical and chemical characterization of spent oil shale (OS) from El-Lajjun area has been carried out and compared with the original OS. The spent shale (SS) is subjected to leaching tests to detect the possibilities of heavy metals released from it into the environment. Standard column leaching experiments have revealed no detectable release of heavy metals to the percolating water. The effectiveness of the SS in removing Pb²⁺ from wastewater has been investigated. The SS is very efficient in removing most of Pb²⁺ where 1 m³ of SS has an efficiency to remove from 64 to 94% of Pb²⁺ from about 1,300 m³ wastewater sample containing 50 ppm Pb²⁺. The efficiency decreases substantially with increasing Pb²⁺ concentration in the wastewater. In real situations, where Pb²⁺ concentration is very low (i.e., less than 5 ppm), the efficiency of the SS is expected to be 100%.     

Geochemistry and petrogenesis of post-collisional alkaline and peralkaline granites of the Arabian-Nubian Shield: a case study from the southern tip of Sinai Peninsula,Egypt

The southern Sinai Peninsula, underlain by the northernmost extension of the Arabian-Nubian Shield, exposes post-collisional calc-alkaline and alkaline granites that represent the youngest phase of late Neoproterozoic igneous activity. We report a petrographic, mineralogical and geochemical investigation of post-collisional plutons of alkaline and, in some cases, peralkaline granite. These granites intrude metamorphosed country rocks as well as syn- and post-collisional calc-alkaline granitoids. The alkaline and peralkaline granites of the southern tip of Sinai divide into three subgroups: syenogranite, alkali feldspar granite and riebeckite granite. The rocks of these subgroups essentially consist of alkali feldspar and quartz with variable amounts of plagioclase and mafic minerals. The syenogranite and alkali feldspar granite contain small amounts of calcic amphibole and biotite, often less than 3%, while the riebeckite granite is distinguished by sodic amphibole (5–10%). These plutons have geochemical signatures typical of post-collisional A-type granites and were most likely emplaced during a transition between orogenic and anorogenic settings. The parental mafic magma may be linked to lithospheric delamination and upwelling of asthenospheric mantle material. Differentiation of the underplated basaltic magma with contributions from the juvenile crust eventually yielded the post-collisional alkaline granites. Petrogenetic modelling of the studied granitic suite shows that pure fractional crystallization cannot quantitatively explain chemical variations with the observed suite, with both major oxides and several trace elements displaying trends opposite to those required by the equilibrium phase assemblage. Instead, we show that compositional variation from syenogranite through alkali feldspar granite to riebeckite granite is dominated by mixing between a low-SiO₂ liquid as primitive or more primitive than the lowest-SiO₂ syenogranite and an evolved, high-SiO₂ liquid that might be a high-degree partial melt of lower crust.     

GIS-based gully erosion susceptibility mapping: a comparison among three data-driven models and AHP knowledge-based technique

Toroud Watershed in Semnan Province, Iran is a prone area to gully erosion that causes to soil loss and land degradation. To consider the gully erosion, a comprehensive map of gully erosion susceptibility is required as useful tool for decreasing losses of soil. The purpose of this research is to generate a reliable gully erosion susceptibility map (GESM) using GIS-based models including frequency ratio (FR), weights-of-evidence (WofE), index of entropy (IOE), and their comparison to an expert knowledge-based technique, namely, Analytic Hierarchy Process (AHP). At first, 80 gully locations were identified by extensive field surveys and Google Earth images. Then, 56 (70%) gully locations were randomly selected for modeling process, and the remaining 26 (30%) gully locations were used for validation of four models. For considering geo-environmental factors, VIF and tolerance indices are used and among 18 factors, 13 factors including elevation, slope degree, slope aspect, plan curvature, distance from river, drainage density, distance from road, lithology, land use/land cover, topography wetness index (TWI), stream power index (SPI), normalized difference vegetation index (NDVI), and slope–length (LS) were selected for modeling aims. After preparing GESMs through the mentioned models, final maps divided into five classes including very low, low, moderate, high, and very high susceptibility. The receiver operating characteristic (ROC) curve and the seed cell area index (SCAI) as two validation techniques applied for assessment of the built models. The results showed that the AUC (area under the curve) in training data are 0.973 (97.3%), 0.912 (91.2%), 0.939 (93.9%), and 0.926 (92.6%) for AHP, FR, IOE, and WofE models, respectively. In contrast, the prediction rates (validating data) were 0.954 (95.4%), 0.917 (91.7), 0.925 (92.5%), and 0.921 (92.1%) for above models, respectively. Results of AUC indicated that four model have excellent accuracy in prediction of prone areas to gully erosion. In addition, the SCAI values showed that the produced maps are generally reasonable, because the high and very high susceptibility classes had very low SCAI values. The results of this research can be used in soil conservation plans in the study area.     

3D geomodeling of the Lower Cretaceous oil reservoir, Masila oil field, Yemen

Oil was first discovered in the Masila area of Yemen in the late 1990s, with about 90% of the reserves found in the Lower Qishn Clastic Member of the Qishn Formation. The porosity determinations of the Lower Qishn Clastic are relatively high and the permeability ranges from 103 to 374?md. This paper tries to evaluate the hydrocarbons in the porous zones encountered in the Lower Cretaceous formations, which were penetrated by the eight wells in the study area. The water saturation shows low values, while the hydrocarbon saturation is in a reverse relation, i.e., the hydrocarbon increases where the water saturation decreases. Different cross-plots such as Rho-PHIN, Rho-DTN, and M-N were used in lithological identification for the two studied formations (Saar and Qishn) in the studied wells. Formation evaluation and presentation forms of the obtained petrophysical parameters have frequently proven that the formations have high hydrocarbon saturation in this area and contain many pay zones. On of the main targets of this paper is to build a detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study.     

Environmental Isotopic Characterization of Groundwater and Surface Water in Northeast Missan Province,South Iraq

The present work studies the environmental isotopes assess groundwater characteristics of the different parts of the main aquifer in the northeast Missan Province in south of Iraq.Water samples of groundwater and surface water were collected for two dry and wet seasons during the water year of 2011–2012.The study shows that most of the groundwater in the aquifer falls above the global meteoric water line,and all the samples fall below the Mediterranean meteoric water line,indicating that these samples are a mixture of two water types.The tritium content of these samples supports this conclusion.The overall conclusion of this study indicates that there are two sources of groundwater recharge in the studied area:the ephemeral streams(Teeb and Dewerge) and major precipitation sources.According to the tritium levels at or below one tritium unit(TU) obtained from the water,supply wells are highly confined or "not vulnerable".Overall,the 3H results imply that recent recharge has taken place during the last four to five decades.In the recharge area,the high tritium content in the southern part of the Teeb area suggests that the recharge originates from rapid infiltration of surface runoff.Therefore,the groundwater resources in the study area should be protected from contamination,because it will influence the aquifer in a relatively short period of time if any contamination enters the recharge areas of the aquifer.     

Quantifying changes in groundwater level and chemistry in Shahrood,northeastern Iran

Temporal changes in the quantity and chemical status of groundwater resources must be accurately quantified to aid sustainable management of aquifers. Monitoring data show that the groundwater level in Shahrood alluvial aquifer, northeastern Iran, continuously declined from 1993 to 2009, falling 11.4 m in 16 years. This constitutes a loss of 216 million m³ from the aquifer’s stored groundwater reserve. Overexploitation and reduction in rainfall intensified the declining trend. In contrast, the reduced abstraction rate, the result of reduced borehole productivity (related to the reduction in saturated-zone thickness over time), slowed down the declining trend. Groundwater salinity varied substantially showing a minor rising trend. For the same 16-year period, increases were recorded in the order of 24% for electrical conductivity, 12.4% for major ions, and 9.9% for pH. This research shows that the groundwater-level declining trend was not interrupted by fluctuation in rainfall and it does not necessarily lead to water-quality deterioration. Water-level drop is greater near the aquifer’s recharging boundary, while greater rates of salinity rise occur around the end of groundwater flow lines. Also, fresher groundwater experiences a greater rate of salinity increase. These findings are of significance for predicting the groundwater level and salinity of exhausted aquifers.     

Stratigraphy,deposition, and structural framework of the cretaceous (review) and 3D geological model of the lower cretaceous reservoirs,Masila oil field,Yemen

The Masila area is located in the Hadhramaut region in east central Yemen. Oil was first discovered in the area in late 1990 with commerciality being declared in late 1991. Oil production began in July 1993. By the end of December 1999, the daily production rate was set at 210,000 stock tank barrels/day (STB/D) of very low gas–oil ratio (GOR) oil under partial to full water drive. About 90% of the reserves are found in the Lower Qishn Clastics Member of the Qishn Formation. This paper focuses on the detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study. There are three critical areas in the process of modeling reservoirs that involve geological and geophysical modeling, reservoir characterization, and reservoir flow modeling. This paper presents methodologies found useful during the modeling of these reservoirs including field case histories for the Lower Cretaceous reservoir in the Masila oilfield.