Application of number–size (N-S) fractal model for separation of mineralized zones in Dareh-Ashki gold deposit, Muteh Complex, Central Iran

The goal of this study is to separate different mineralized zones in Dareh-Ashki gold deposit located in Muteh Complex, Central Iran, by using number–size (N-S) fractal model. The N-S log–log plot shows seven geochemical populations and four Au-mineralized zones. Based on obtained results, Au thresholds are 0.17, 0.32, 6.3, and 12.6 ppm which represent weakly, moderately, highly, and extremely mineralized zones in terms of Au grades, respectively. Au values lower than 0.17 ppm illustrate wall rocks. Main mineralization stage of gold commences from 6.3 ppm in this deposit. The moderately mineralized zone with Au values between 0.32 and 6.3 ppm has occupied the biggest part of the studied deposit. However, highly (with Au values between 6.3 and 12.6 ppm) and extremely (higher than 12.6 ppm) mineralized zones have small extension. Correlation between geological model and results from N-S fractal model reveals that the gold mineralized zones specifically the moderately mineralized zone are situated in green schist units.     

Application of weights-of-evidence and certainty factor models and their comparison in landslide susceptibility mapping at Haraz watershed, Iran

The main goal of this study was to investigate the application of the weights-of-evidence and certainty factor approaches for producing landslide susceptibility maps of a landslide-prone area (Haraz) in Iran. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. The landslide conditioning factors considered for the study area were slope gradient, slope aspect, altitude, lithology, land use, distance from streams, distance from roads, distance from faults, topographic wetness index, stream power index, stream transport index and plan curvature. For validation of the produced landslide susceptibility maps, the results of the analyses were compared with the field-verified landslide locations. Additionally, the receiver operating characteristic curves for all the landslide susceptibility models were constructed and the areas under the curves were calculated. The landslide locations were used to validate results of the landslide susceptibility maps. The verification results showed that the weights-of-evidence model (79.87%) performed better than certainty factor (72.02%) model with a standard error of 0.0663 and 0.0756, respectively. According to the results of the area under curve evaluation, the map produced by weights-of-evidence exhibits satisfactory properties.     

The measurement of gamma-emitting radionuclides in beach sand cores of coastal regions of Ramsar,Iran using HPGe detectors

Radionuclides which present in different beach sands are sources of external exposure that contribute to the total radiation exposure of human. ²²⁶Ra, ²³⁵U, ²³²Th, ⁴⁰K and ¹³⁷Cs analysis has been carried out in sand samples collected at six depth levels, from eight locations of the northern coast of Iran, Ramsar, using high-resolution gamma-ray spectroscopy. The average Specific activities of natural radionuclides viz., ²²⁶Ra, ²³⁵U, ²³²Th, ⁴⁰K and ¹³⁷Cs, in the 0–36 cm depth sand were found as: 19.2 ± 0.04, 2.67 ± 0.17, 17.9 ± 0.06, 337.5 ± 0.61 and 3.35 ± 0.12 Bq kg⁻¹, respectively. The effects of organic matter content and pH value of sand samples on the natural radionuclide levels were also investigated. Finally, the measured radionuclide concentrations in the Ramsar beach were compared with the world average values, as reported by UNSCEAR (2000). None of the studied beaches were considered as a radiological risk.     

New constraints on lithospheric thickness of the Iranian plateau using converted waves

The study of mantle lithosphere plays a key role to reveal predominant tectonic setting process of a region. The current geological and tectonic setting of Iran is due to the ongoing continental–continental collision of the Arabian and Eurasian plates. We applied a combined P and S receiver function analysis to the teleseismic data of nine permanent broadband seismic stations of the International Institute of Earthquake Engineering and Seismology located in different tectonic zones of Iranian plateau. More than 4 years of data were used to estimate the thickness of the crust and mantle lithosphere. According to our results, the crust is 50 km thick beneath the Zagros fold and thrust belt (ZFTB). We found the maximum Moho depth of approximately 70 km under the Sanandaj-Sirjan zone (SSZ) indicating the overthrusting of the crust of Central Iran onto the Zagros crust along the main Zagros thrust (MZT). Below the northeasternmost part of the Urumieh–Dokhtar Magmatic Arc (UDMA) and Central Iran, the Moho becomes shallower and lies at 40 km depth. Towards northeast, beneath the Alborz zone, the crust is 55 km thick. Based on S receiver functions, we provided new insights into the thickness of the Arabian and Eurasian lithospheres. The location of the boundary between these plates was estimated to be beneath the SSZ, which is slightly shifted northeastward relative to the surficial expression of the MZT. Furthermore, the Arabian plate is characterized by the relatively thick lithosphere of about 130 km beneath the ZFTB reaching 150 km beneath the SSZ, where the thickest crust was also observed. This may imply that the shortening across the Zagros is accommodated by lithospheric thickening. In contrast, UDMA and Central Iran are recognized by the thin lithosphere of about 80–85 km. This thin lithosphere may be associated with the asthenospheric upwelling caused by either lithospheric delamination or Neo-Tethys slab detachment beneath the Zagros collision zone.     

An approximate method for joint sequential simulation of multiple spatial variables

Multivariate simulation is an important longstanding problem in geostatistics. Fitting a model of coregionalization to many variables is intractable and often not permitted; however, the matrix of collocated correlation coefficients is often well informed. Performing a matrix simulation with LU decomposition of the correlation matrix at each step of sequential simulation is implemented in some software. The target correlation matrix is not reproduced because of conditioning to local data and the particular variable ordering in the sequential/LU decomposition. A correction procedure is developed to calculate a modified correlation matrix that leads to reproduction of the target correlation matrix. The theoretical and practical aspects of this correction are developed.     

Statistical Optimization of Anaerobic Biological Processes for Dye Treatment

In the present study both the synthetic media composition as well as some process parameters in the anaerobic decolorization of Reactive Black 5 (RB5) by activated sludge were studied and optimized using statistical design of experiments (DOEs). Statistical analysis of the results of Plackett–Burman DOE showed that the addition of Mn or Fe, or increase in concentration of Mg, had a positive effect on the anaerobic decolorization efficiency whereas the effect of increase in concentration of glucose, ammonium chloride, and calcium chloride was negative. The effect of change in the concentration of glucose, mixed liquor suspended solid (MLSS), and RB5 on the anaerobic decolorization efficiency and rate and chemical oxygen demand (COD) removal was studied using central composite design methodology. Statistical analysis of the data showed that all the factors had significant effect on both the dye decolorization efficiency and rate. The interaction of glucose with MLSS and with dye and the interaction of MLSS with glucose and with dye were significant when the response was decolorization efficiency and rate, respectively. When COD removal was the response, the effect of change in glucose and MLSS concentration and the interaction between these two factors had statistically significant effect on the response.     

Influences of Environmental and Operational Factors on Dark Fermentative Hydrogen Production: A Review

Hydrogen (H₂) is one of renewable energy sources known for its non‐polluting and environmentally friendly nature, as its end combustion product is water (H₂O). The biological production of H₂ is a less energy intensive alternative where processes can be operated at ambient temperature and pressure. Dark fermentation by bacterial biomass is one of multitude of approaches to produce hydrogen which is known as the cleanest renewable energy and is thus receiving increasing attention worldwide. The present study briefly reviews the biohydrogen production process with special attention on the effects of several environmental and operational factors towards the process. Factors such as organic loading rate, hydraulic retention time, temperature, and pH studied in published reports were compared and their influences are discussed in this work. This review highlights the variations in examined operating ranges for the factors as well as their reported optimum values. Divergent values observed for the environmental/operational factors merit further exploration in this field.     

An evaluation of earthquake hazard parameters in the Iranian Plateau based on the Gumbel III distribution

The Gumbel’s third asymptotic distribution (GIII) of the extreme value method is employed to evaluate the earthquake hazard parameters in the Iranian Plateau. This research quantifies spatial mapping of earthquake hazard parameters like annual and 100-year mode beside their 90 % probability of not being exceeded (NBE) in the Iranian Plateau. Therefore, we used a homogeneous and complete earthquake catalogue during the period 1900–2013 with magnitude M _w ? ≥?4.0, and the Iranian Plateau is separated into equal area mesh of 1° late?×?1° long. The estimated result of annual mode with 90 % probability of NBE is expected to exceed the values of M _w 6.0 in the Eastern part of Makran, most parts of Central and East Iran, Kopeh Dagh, Alborz, Azerbaijan, and SE Zagros. The 100-year mode with 90 % probability of NBE is expected to overpass the value of M _w 7.0 in the Eastern part of Makran, Central and East Iran, Alborz, Kopeh Dagh, and Azerbaijan. The spatial distribution of 100-year mode with 90 % probability of NBE uncovers the high values of earthquake hazard parameters which are frequently connected with the main tectonic regimes of the studied area. It appears that there is a close communication among the seismicity and the tectonics of the region.