Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

The black water around the Changjiang (Yangtze) Estuary in the spring of 2003

The Changjiang (Yangtze) Estuary is located in the East China Sea shelf with shallow water. Affected by the tide mixing and the runoff of the Changjiang River and the Qiantang River, the turbidity is very high. Generally, the water-leaving radiance is high in the turbid water because of the large particle scattering. Based on the in-situ data and ocean color remote sensing data of SeaWiFS, it was found that there was a black water region with the normalized water-leaving radiances less than 0.5 mW/(cm2·μm2·...     

夏季长江口外海区域上升流现象的数值研究

基于Blumberg等(1996)的ECOMSED模式,对长江口外海区域夏季的上升流现象进行了数值模拟.模式综合考虑径流,风应力,环流,热通量和M_2,S_2,K_1,O_1四个主要分潮的作用,从而提高长江口外海区域上升流模拟的准确性和可靠性,并通过各种控制实验分析了其动力机制,进一步说明本区域影响上升流的主要因子.数值实验表明,长江口外水下河谷的南边(杭州湾口门中心东侧),上升流主要是由向北流动的台湾暖流通过底Ekman效应和陆坡的抬升共同作用产生的.夏季偏南风对长江口外水下河谷西侧上升流的产生有一定影响,但作用不大.此外,潮汐潮流对上升流的产生也起着一定的作用,但在本文关注的上升流区潮作用影响不大.     

二维视频三维化的新方法

基于3DsMAX软件平台,根据对二维视频中帧间物体与摄像机位置关系和现有的二维视频转三维的方法的分析,提出了一种二维视频转化成3DTV的新思路--利用视频帧间本身具有的三维视差信息对运动物体进行图像处理后所得图像作为视差图,同时运用三维合图程序得到用于显示的合成图,并对其可行性作了理论和实验t的比较分析,实验证明该方法在某些特定环境中的可操作性,比较了与其他三维化方法的优劣.     

Elastic-plastic analysis for pile-anchor supporting system of deep foundation pit

By using numerical analysis methods to simulate the deep excavation, a lot of analyses are established on the basis of two-dimensional plane strain, ignoring the fact that foundation pit possesses three dimensions. For soil constitutive relation, people always take linear and nonlinear model, without considering the plastic behavior of soil. Using plastic-elastic hardening model to simulate constitutive relation of soil characteristics, the authors carried out mechanical analysis for pit excavation and support. The results show that the analysis for the stress state of pile anchor system is an effective way which provides theoretical basis for calculation of soil displacement.     

引水工程复杂水流的二、三维嵌套数值模拟

建立宽浅河道与管道水流的二、三维嵌套的数学模型,对基本的控制方程、方程的数值离散格式和求解方法、嵌套连接和初始边界条件等问题进行研究.利用上述方法对某工程实例进行计算,在宽广水域上给出了水力要素的平面分布,在复杂边界强三维流动的计算区域得到其三维运动特性.计算结果与实验资料进行了比较,两者吻合较好,说明嵌套连接的二、三维数学模型是解决某些实际工程问题的一种可靠的和有效的工具.     

两个龙须菜新品系经济性状及琼胶特性的初步研究

2008年2～5月在广东省南澳县深澳海区对选育的龙须菜新品系07-1,07-2和对照组福建宁德栽培的981品系进行海上栽培比较试验,测定了3个品系的藻体日平均生长速率,试验了敌害生物(藻钩虾和团水虱)对3个品系的影响,比较了琼胶特性.结果显示,在水温11～20 ℃,盐度32.4～32.8的条件下,品系07-1,07-2的藻体日平均生长速率分别为3.8%/d和4.1%/d,宁德栽培品系的藻体日平均生长速率为3.2%/d.品系07-1,07-2的生长适应水温下限为16 ℃,比宁德栽培品系降低了2 ℃.与宁德栽培的981品系相比较,选育的龙须菜品系07-1,07-2对藻钩虾和团水虱有较强的耐受能力.品系07-1,07-2的琼胶含量比福建宁德栽培的981品系分别提高10.0%和14.4%,凝胶强度也分别提高了5.46%和14.5%,表明2个新品系具有潜在的推广应用价值.     

盐度、pH胁迫对茂名海域文昌鱼磷酸酶活性的影响

实验测定了茂名海域文昌鱼在 96 h 时间间隔内耐受盐度的极限值为:最低 17.24,最高46.24;耐受 pH 的极限值为最低 5.0,最高10.0.通过实验前后文昌鱼体重及酸碱磷酸酶活性的变化对比,找出茂名海域文昌鱼较适合生长的盐度及 pH 范围分别为:28.0～32.0及7.5～8.5.     

六盘山植物区系基本特征的初步分析

六盘山位于陕甘宁交接地区,属于半湿润气候向半干旱气候的过渡带,是黄土高原生物多样性最丰富的地区之一,有维管植物836种,隶属于93科,359属。本区属于泛北极植物区、中国-日本森林植物亚区、华北植物地区的黄土高原亚地区。全部种子植物可分为13个分布区类型和12个变型,以北温带分布类型为主,与其他植物区系联系广泛,但特有属较贫乏。六盘山与小陇山、太白山和中条山的属相似性系数较高,均达60%以上,表明几座山体处于相似的生物气候背景之下,地理隔离性不明显。与贺兰山的属相似性系数低于60%,因为贺兰山位于干旱的荒漠与半荒漠区,可能有地理隔离作用。     

Estimation and prediction of plastic waste annual input into the sea from China

Marine plastic debris has been a pervasive issue since the last century, and research on its sources and fates plays a vital role in the establishment of mitigation measures. However, data on the quantity of plastic waste that enters the sea on a certain timescale remain largely unavailable in China. Here, we established a model using material flow analysis method based on life cycle assessment to follow plastic product from primary plastic to plastic waste with statistical data and monitoring data from accurate sources. This model can be used to estimate and forecast the annual input of plastic waste into the sea from China until 2020. In 2011, 0.547 3–0.751 5 million tons of plastic waste entered the seas in China, with a growth rate of 4.55% per year until 2017. And the amount will decrease to0.257 1 to 0.353 1 million tons in 2020 under the influence of governmental management. The amount of plastic waste discharged from coastal areas calculated in this study was much larger than that from river, thus it is suggested to strengthen the governance and control of plastic waste in coastal fishery activities in China in order to reduce the amount of marine plastic waste input.