A note on wave action conservation in a dissipative current wave motion

We consider steady, slowly varying water waves propagating on a steady current over a gently sloping bed, so-called current depth refraction. All expressions are correct to second order in wave amplitude. Formulating the energy equation for the fluctuating motion in terms of wave action (wave energy divided by intrinsic angular frequency) results in an expression, where the dissipative term is strikingly similar to wave action itself. It is simply the ‘extra’ dissipation (per unit area) caused by the fluctuating motion (i.e. total dissipation minus the effect of current acting on total mean bed shear stress) divided by the intrinsic angular frequency. We call it ‘wave action dissipation’. An inconsistency in Phillips' (1977) book is pointed out. A new formula for the calculation of wave amplitudes along rays is set forth.     

Growth Aspects and Magnesium Carbonate Concentrations of the Reef Building Octocoral Heliopora coerulea (Pallas) after Transplantation

Abstract. An experiment to test C have's hypothesis on temperature dependent MgCO₃ concentrations in marine calcareous skeletons was undertaken by transplanting colonies of Heliopora coerulea. The corals were transferred from a shallow lagoon with high average temperatures to the outer bottom of a fringing reef, 16 m depth, with low average temperatures. Against expectation, a statistically significant increase of average mol % concentrations from 0.48 to 0.54 % for upper growth regions and from 0.49 to 0.62% for lower growth regions was obtained. Temperature records during the experimentation period and the above data indicate that the mol% MgCO₃ concentration in the skeleton of living Heliopora colonies increases when transplanted to an environment with a lower temperature average than that of their original growth site, and with seasonal temperature fluctuations which are smaller in the experimental site than in the control site. Temperature fluctuations at the control site were up to 2.5 times greater than at the experimental site for most of the observation months. This supports the conclusion that the parameters a) minimum temperature and b) temperature stability of the environment are essential for the incorporation of Mg into the carbonate skeleton matrix of marine organisms. Within this study the results of a quantitative chemical analysis of the carbonate skeleton of H. coerulea are presented and growth data of transplanted colonies compared with those from the control site.     

Incorporation,distribution and fate of saturated petroleum hydrocarbons in sediments from a controlled marine ecosystem

A simulation of a chronic input of petroleum into an estuarine environment was investigated using the facilities at the Marine Ecosystems Research Laboratory at the University of Rhode Island. An oil-water dispersion of No. 2 fuel oil was added to the system (twice weekly for 24 weeks) and the saturated hydrocarbons from this oil were measured in suspended material and sediments. After the initial chronic oil addition, trace amounts of hydrocarbons were detected in the sediments within two weeks, but substantial accumulation was not detected for approximately 135 days. The oil appeared to enter the sediment via the suspended material, with most of the saturated hydrocarbons associated with smaller size sediment particles (< 45 μm to > 0·3 μm). With time, the fuel oil saturated hydrocarbons in the sediments were mixed to a depth of 3 to 4 cm. Although only 12% of the total saturated hydrocarbons added to the system were found in the sediments, these hydrocarbons appear to be relatively stable and were still detectable in these sediments for at least six months after the last oil addition.     

Phosphate adsorption and desorption in a tropical estuary (Maracaibo system)

The Maracaibo Estuary is of particular interest because of its location in the tropics, its large size (over 12,000 km²), the economic importance of its underlying hydrocarbon deposits and its increasing rate of pollution. Sediments from this estuary were studied in order to characterise their capacity to adsorb and desorb phosphorus. Considerable variability in capacity for phosphate sorption was found among the seventeen samples studied. This variability can be attributed first to the differences among the samples in total P content and, secondly, to their differences in free iron content. Also, it appears that P retention contributes to the control of P concentration in the water and therefore the sediments serve as a buffer in controlling P eutrophication in the estuary.     

A random walk model for simulating simultaneous currents at several depths

Empirical orthogonal function (EOF) analysis is used in conjunction with Markov chains to generate simultaneous current time series at several depths with a random walk model. Duration statistics and probability distributions for EOF modes obtained from real data are used to generate transition probability matrices for the random walk model. New time series of EOF modes are generated, and then combined to produce current time series. The technique has been tested on data from Haltenbanken. Statistical properties of real and simulated time series were compared. Results indicate that the model is acceptable as a tool in simulating current time series to be used in offshore operation models.     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.     

Grain-size distribution of quartz and feldspar extracts and implications for flocculation processes

Quartz and feldspar extracts, obtained by chemical dissolution of the clay minerals, provide insight into the inorganic flocculation and mineralogical influences upon the texture of fine-grained glaciomarine deposits. Glacial comminution in higher latitudes explains the relatively high contents of quartz and feldspars. Quartz and feldspar are better sorted and were apparently less influenced by flocculation than were phyllosilicates, except for particles less than approximately 16 μm, which are poorly sorted due to their inclusion in flocs. The 16-μm boundary is suggested to be useful for approximately separating fines that are usually involved in flocculation and coarse silt and larger grains that are less influenced.     

Bioavailability: the organism as sensor

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.