Open sea berths for liquid bulk carriers

The transfer of liquid bulk through flexible transfer lines can be accomplished despite relatively large ship motions. For this reason, open sea berth terminals have replaced conventional harbors in many places. The thorough understanding of moored ships dynamics when subjected to waves, wind and currents, combined with the use of flexible dolphins, flexible fenders, asymmetric constant-tension winches and nylon tails permit us to design open sea berth terminals for relatively exposed areas. The design of an integrated system of marine sensors to continuously monitor all the critical elements-ship motion and mooring and fender forces-will enhance the operational procedure whilst insuring safe operations. A berth code can then be established for insuring the maximum efficiency of the terminal on the basis of the measurement of these critical elements.     

Paleomonsoon precipitation deduced from a sediment core from the equatorial Indian Ocean

Rapid shifts in past climate recorded in polar ice sheets have elicited various explanations relating to either thermohaline circulation changes by ice-rafting or natural greenhouse gas concentrations modulated by climatic conditions in the tropics. To compare the tropical paleoclimate record with the polar record, one must choose sediment cores from highly productive ocean regions. Necessarily, such regions reflect the wind records in the tropics, because high productivity is associated with upwelling driven by winds. Comparing tropical precipitation records with high-latitude records is, however, a more difficult task because sediments recording paleoprecipitation usually have low sedimentation rates, and offer coarser resolution relative to polar ice cores. Here, we present δ ¹⁸O data of three planktonic species of Foraminifera (a proxy for precipitation) from such a sediment core, spanning the past 35 ka for the equatorial Indian Ocean, which falls under the southwest monsoon (SWM) realm. Results show that minimum SWM precipitation occurred at the Last Glacial Maximum, with a subsequent increase at Termination IA. During the Holocene, SWM precipitation intensified uniformly up to the core top (∼2.2 ka b.p.), as revealed by generally decreasing δ ¹⁸O values. Variations in precipitation are consistent with climate changes recorded in polar ice sheets. Although the different resolutions of the two records preclude a rigorous comparison, abrupt cooling/warming events appear to be accompanied by sudden reduction/enhancement in (SWM) rainfall. Thus, mechanisms with time scales much shorter than a millennium, such as natural greenhouse warming (e.g., CH₄ concentration), controlled by emissions from the tropics, could have played a major role in high-latitude climate change.     

Shipborne GPS attitude determination during MMST-93

The attitude parameters of a ship underway were measured using a configuration of four 10-channel NovAtel Model 951 narrow-correlator-spacing receivers. These C/A code receivers have output rates of up to 10 Hz and maintain effective carrier phase lock under relatively harsh ship dynamics. The attitude parameters are calculated independently at each epoch using differential carrier phase measurements, carrier phase ambiguities are resolved on-the-fly by constraining the approximately known distances between the antennas that are rigidly mounted on the ship. Carrier phase thermal noise and multipath are minimized by mounting the antennas as far apart as possible. The four-antenna configuration provides redundancy and further improves accuracy. During the Matthew Motion Sensor Trials (MMST-93) conducted off the coast of Halifax, Nova Scotia, in June-July 1993, the GPS-derived attitude parameters were compared with those obtained with a Honeywell HG1050 ring laser gyro inertial navigation system (INS) which provides roll and pitch with an accuracy of 15 arcsecs and heading with an accuracy of 2 arcmins. To simulate rough weather conditions, sharp maneuvers were performed to induce roll angles in excess of 10°. No accuracy degradation nor any loss of GPS measurements occurred. The RMS agreement between GPS and INS derived attitude parameters is better than 2 arcmins in heading, 1 arcmin in pitch and 3 arcmins in roll. This level of accuracy demonstrates the capability of GPS for cost-effective shipborne attitude determination at an accuracy level of 0.05     

Shallow-Water Gasohydrothermal Vents of Ushishir Volcano and the Ecosystem of Kraternaya Bight (The Kurile Islands)

Abstract. A marine ecosystem in the crater of the Ushishir Volcano (Kraternaya Bight, Yankich Island, the Kuriles) showing gasothcrmal activity was studied for hydrographical, hydrochemical, and biological characteristics. Maximal changes in chemical and biological characteristics were observed in the surface water layer of 0–5 m. This layer had higher water temperature, was saturated with volcanogcnic carbon dioxide (up to 2000 10^-6 torr), ovcrsaturatcd with oxygen (up to 200 %), and contained high concentrations of chlorophyll a. Hydrogen sulfide was found in the surface water layer and at a depth of 15 m in the area of maximal effect of volcanic effluents.
The planktonic community is characterized by high rates of production and destruction of organic matter only in the 0–5 m layer. Daily vertical migrations of the ciliatc Mesodinium rubrum were observed, which caused "red tides".
Bacterial, algobacterial, and diatom mats developed on the bottom of the bight in the zone of gasohydrothermal vents and in areas of volcanic water seeping. The rate of organic matter production in algobacterial mats reached 33.4g C-rrr²-d^-l, chcmolithotrophy predominating. Bottom settlements had high population density and great animal biomass, which reached 10 kg m^-2 in gasohydrothermal fields. They obtain sufficient energy from primary production of microphy-tobenthos, algobacterial, and bacterial mats. Bcnthic species dominant in the bight were not found off the Ushishir Islands.
Some species of macrobenthos inhabiting the Kraternaya Bight differ markedly in size and biomass from the same species found beyond the bight.     

Cyclic inelastic behavior and analytical modelling of pile–leg interaction in jacket type offshore platforms

Structures in locations susceptible to severe seismic disturbances should be designed properly in order to resist lateral forces induced by earthquake motions. Steel offshore platforms are some of those structures which are built to withstand environmental and accidental loads during oil exploitation operation. Particular attention is being paid to earthquake loads in seismic active areas because it directly influences the capacity of the offshore installations.

In this paper, a small-scaled planar platform has been modelled analytically using nonlinear finite element program, based on an experimental test, conducted simultaneously in order to assess the local and global behavior of pile–leg interaction in Jacket Type Offshore Platforms (JTOPs). A combination of nonlinear beam column elements and fatigue affected elements are used to capture the inelastic cyclic behavior of planar frame as accurately as possible. Results of analytical tests are to be compared with experiments and it is concluded that an analytical approach can be best used for modelling JTOPs with reasonable accuracy regardless of the type and scale of the structure. Moreover, a special study on joints has been carried out and the best model has been selected to simulate brittle behavior of joints resulting from heat affected zone.     

A note on wave action conservation in a dissipative current wave motion

We consider steady, slowly varying water waves propagating on a steady current over a gently sloping bed, so-called current depth refraction. All expressions are correct to second order in wave amplitude. Formulating the energy equation for the fluctuating motion in terms of wave action (wave energy divided by intrinsic angular frequency) results in an expression, where the dissipative term is strikingly similar to wave action itself. It is simply the ‘extra’ dissipation (per unit area) caused by the fluctuating motion (i.e. total dissipation minus the effect of current acting on total mean bed shear stress) divided by the intrinsic angular frequency. We call it ‘wave action dissipation’. An inconsistency in Phillips' (1977) book is pointed out. A new formula for the calculation of wave amplitudes along rays is set forth.     

Pop-up bottom seismic recorder (PUBS) of the Institute of Oceanographic Sciences,U.K.

A pop-up bottom seismic recorder designed for seismic refraction experiments was built by the Institute of Oceanographic Sciences in 1968. The device is housed within a 71 cm diameter sphere weighing 270 kg when launched. signals picked up by a hydrophone are recorded in analogue form on magnetic tape in the band 2–100 Hz. The total continuous recording period is 12 hr but the lifetime of the system can be effectively extended by cycling the tape-recorders to allow shooting to go on for up to 3 days. Ballast release is by acoustic command or by pre-set clock. The instruments have been used in water depths from 150 to 4820 m making a total of 63 deployments with a 95% recovery rate. A new version with three-component geophones is being built.     

Spatial variation of the intertidal sediments and macrozoo-benthic assemblages along Eighty-mile Beach, North-western Australia

The extensive intertidal flats along Eighty-mile Beach in North-western Australia appear to be monotonous and homogeneous and seem ideally suited to study tidal zonation in macrozoo-benthic communities and their possible correlates with characteristics of the sediment. In October 1999, we sampled benthic invertebrates and sediments at a total of 895 sampling stations distributed over six different locations, each location separated by 15 km of unsampled foreshore along Eighty-mile Beach. To test for the presence or absence of patterns of tidal zonation (distinct height-related zones of specific sediment grain sizes or zoobenthic taxonomic groups) or patchiness (distinct patches of specific sediment grain sizes or zoobenthic taxonomic groups not related to tidal height) each location was divided into three along-shore sections and each section (transect) was examined at two or three tidal heights. Zonation was observed for sediment grain sizes. Sediments were coarser at the highest intertidal level and finer towards the low water line. Benthic assemblages also differed among tidal heights, but in terms of species-composition the differences were not consistent among the locations. Each location supported a unique collection of benthic invertebrates. Therefore the hypothesis of the presence of distinct zones of specific species or zoobenthic taxonomic groups was rejected; the presence of benthic patches was confirmed. The distribution of sediments and the composition of benthic assemblages were surprisingly poorly correlated compared to those reported in 12 previous quantitative studies around the world. One possible explanation might be that super-cyclone Vance, which hit the study-area only six months before this study, contributed to this poor correlation. Alternatively, the poor correlation may indicate that biotic interactions are more important than the assumed abiotic structuring.