Experimental study on the settlement of marine deposits of Anzali under cyclic loading by laminar box apparatus

The central Alborz mountain range, located in northern Iran, neighboring the Caspian Sea and where the two Persia and Eurasia plates meet, is known as a seismologically active area. In this regard, investigation of the behavior of saturated sand deposits located in this area may be of particular interest. Saturated sand deposits are subjected to instabilities owing to liquefaction or volume change due to earthquake shakings. A particular type of saturated sand deposits is Anzali sand which is abundant in Anzali port and other cities located in this area in northern Iran. This type of sand is a representative for most sands found in this area, i.e., the southern coastal line of Caspian Sea. This research is solely focused on the volume change behavior of marine deposits of Anzali area, often characterized as Anzali sand, in terms of the settlement of a model footing located on the surface of the sand by the aid of a transparent laminar shear box apparatus. Effects of a number of factors such as the frequency of the cyclic loading, the initial density of the sand, and the sample preparation method have been investigated. Observations indicated that the density index and the frequency of loading which are proportional to the energy of an earthquake have direct effects on the accumulation and amount of the final settlement of Anzali sand.     

A comparative study of performances of various base isolation systems,part II: Sensitivity analysis

A series of numerical experiments on the performance of different base isolation systems for a non-uniform shear beam structure is carried out. Several base isolation systems are considered and the peak relative displacements and the maximum absolute accelerations of the base-isolated structure and its base raft under a variety of conditions are evaluated. Several sensitivity analyses for variations in properties of the base isolator and the structure are carried out. A number of different earthquake excitations are also used in the study. The results show that performances of the base isolation systems are not sensitive to small variations in their natural period, damping or friction coefficient. The presence of a frictional element in the isolators reduces their sensitivity to severe variations in frequency content and amplitude of the ground acceleration. In particular, the resilient-friction base isolators with or without sliding upper plate perform reasonably well under a variety of loading conditions. The rubber bearing type, however, leads to the lowest peak transmitted accelerations for moderate intensity earthquakes.     

Stiffness identification of two- and three-dimensional frames

Four widely used structural system identification methods are presented. Based on Bayesian estimation theory, two new formulae and their derivations are shown. Time domain responses of two frames when subjected to the ground motion of the El Centro earthquake are computed then transformed to the frequency domain. Frequencies and mode shapes of frames are extracted from Fourier spectra. Using these frequencies and mode shapes, a parametric study is conducted, and the system identification methods are compared and discussed. The importance of a prior analytical model on the rate of convergence of the revised parameters is investigated. Recommendations are given regarding the feasibility of each method for more accurate estimation. A model suitable for parameter identification of three-dimensional frames is presented. This model, with different identification methods, is used to estimate the parameters of a two-storey frame.     

Petrology and geochemistry of the granitoid complex of Boroujerd, Sanandaj-Sirjan Zone, Western Iran

The Middle Jurassic Boroujerd Granitoid Complex of the Sanandaj-Sirjan Zone (with a U–Pb zircon age of 169–172 Ma) was emplaced in an active continental margin setting. This complex consists of three main units: an elongate NW–SE extending granodioritic unit (SiO₂ = 58–71 wt%), which is widespread throughout the area, a quartz-dioritic unit (SiO₂ = 52–63 wt%), exposed as small stocks within the granodioritic body, and a monzogranitic unit (SiO₂ = 70–75 wt%), widely scattered as separate small outcrops through the southern part of the area. A series of NW trending aplites and pegmatites are present in the granodioritic unit and its aureole.Geochemically this complex is metaluminous to slightly peraluminous, typical of I-type granites. It belongs to high-K calc-alkaline series and displays the geochemical characteristics typical of volcanic arc granites related to an active continental margin (e.g. significant Nb, Ti, P and Sr depletion). Isotopic data (Sr_i = 0.7062–0.7074 and εNd_t = −3.02 to −3.62) are consistent with a crustal protolith. In addition, fractional crystallization may have played an important role in the formation of the whole spectrum of the granitoid types that occur in the Boroujerd area.     

On multicomponent gas diffusion and coupling concepts for porous media and free flow: a benchmark study

Computational Geosciences - Multicomponent gas transport in porous media and at the interface between porous media and free flow occurs in a wide range of technical and environmental systems....     

Statistical fusion of two-scale images of porous media

The reconstruction of the architecture of void space in porous media is a challenging task, since porous media contain pore structures at multiple scales. Whereas past methods have been limited to producing samples with matching statistical behavior, the patterns of grey-level values in a measured sample actually say something about the unresolved details, thus we propose a statistical fusion framework for reconstructing high-resolution porous media images from low-resolution measurements. The proposed framework is based on a posterior sampling approach in which information obtained by low-resolution (MRI or X-ray) measurements is combined with prior models inferred from high-resolution microscopic data, typically 2D. In this paper, we focus on two-scale reconstruction tasks in which the measurements resolve only the large scale structures, leaving the small-scale to be inferred. The evaluation of the results generated by the proposed method shows the strong ability of the proposed method in reconstructing fine-scale structures positively correlated with the underlying ground truth. Comparing our method with the recent method of Okabe and Blunt [12], in which the measurements are also used in the reconstruction, we conclude that our method is more robust to the resolution of the measurement, and more closely matches the underlying fine-scale field.     

Clinopyroxene chemistry in Tertiary alkaline volcanic rocks from Taleghan,central Alborz,Iran: Implications for two parental melts

In the Taleghan area of Alborz mountain range, two distinct units of alkaline rocks are identified. Whole rock major and trace element data does not provide a clue as to their common or different parental melts. However, major and trace element geochemistry of their included clinopyroxene phenocrysts, combined with the whole rock data, helped to infer that two parental magmas were involved in the evolution of volcanic succession in the Taleghan area.     

MATLAB programs for the synthetic models

The separation of residual gravity anomaly from regional gravity has considerably been studied for many years in gravity explorations. In addition, it is considered as a critical step in gravity data inversion. Some techniques have been developed for regional–residual anomaly separation both in space and frequency domains. One of these techniques for computing the regional anomaly is nonlinear filtering. In this paper, some techniques such as low-pass filtering, Butterworth, upward continuation, and nonlinear filtering are used to on synthetic gravity data in present of random noise and noise free for the purpose of residual–regional anomaly separation. The obtained results of techniques are compared with each other. The results have shown that separation methods are so efficient where synthetic models are located in shallow depth. Moreover, it is found that in comparison with other separation techniques, nonlinear filtering is more efficient in residual–regional anomaly separation and upward continuation technique is more efficient than Butterworth filter and low-pass filter. In addition, all of the obtained results have shown that Butterworth and low-pass filters are the same.     

Refining the OSL age of the last earthquake on the Dheshir fault,Central Iran

In Central Iran there are several cities along the Dehshir fault, which have similar geological conditions to that of the city of Bam prior to the 2003 earthquake (Mw 6.5), during which more than 30,000 lives were lost. Optical stimulated luminescence (OSL) samples were collected from the Dehshir fault in order to place constraints on its seismic history. The single aliquot regenerative (SAR) dose measurement protocol on coarse grained quartz extracts was used for this study. This SAR protocol had to be optimized for the low OSL sensitivity by varying both the preheat temperatures and test doses used. Dose recovery tests showed that given laboratory dose could be successfully recovered. However, replicate palaeodose (D_e) data were scattered and consequently ages based on mean D_e's had large uncertainties. As this is thought to largely reflect poor bleaching conditions prior to sediment burial at the site, various statistical procedures were employed in conjunction with the stratigraphic knowledge of the site to try and extract more refined burial ages from the samples. From this the timing of the last earthquake was estimated around 2.0 ± 0.2 kyr. This refined age suggests that the earthquake catalogue of Iran is incomplete and more paleoseismological investigation is required to recognize and date the previous events of Dheshir fault.