A comparison of ASCE and FAO-56 reference evapotranspiration for a 15-min time step in humid climate conditions

Many applications in diverse disciplines require estimates of evapotranspiration (ET) at hourly or smaller time steps. The primary objectives of this study were to compare the American Society of Civil Engineers (ASCE) and FAO-56 Penman–Monteith equations for 15-min ET₀ (ET_{0,15-min,ASCE} and ET_0,15-min,FAO) estimations for humid climate conditions and to compare the 24 h sum of ASCE (ET_0,24 h,ASCE) and FAO-56 15-min ET₀ (ET_0,24 h,FAO) with the daily ET₀ (ET_0,d,FAO) computed from the daily FAO-56 equation, which is identical to ASCE daily ET₀ equation. Ten-year, i.e., 1997–2006 continuous 15-min and daily weather data for 11 representative and well-distributed sites throughout Georgia, USA were used. It was evident that during the day, ET_{0,15-min,ASCE} was higher than ET_0,15-min,FAO due to a lower surface resistance parameter value, while at night ET_{0,15-min,ASCE} was lower than ET_0,15-min,FAO due to a higher surface resistance parameter value. The ET_0,15-min,FAO was about 5% less than ET_{0,15-min,ASCE} and ET_0,24 h,FAO was about 5% lower than ET_0,24 h,ASCE. The difference between ET_{0,15-min,ASCE} and ET_0,15-min,FAO during the day and night was highly dependent on wind speed. During the three summer months, i.e., June, July and August, on average, ET_0,24 h,FAO was only 1% higher than ET_0,d,FAO while ET_0,24 h,ASCE was 5% higher than ET_0,d,FAO. For the entire year, ET_0,24 h,FAO was 8% higher than ET_0,d,FAO while ET_0,24 h,ASCE was 13% higher than ET_0,d,FAO. The ET_0,24 h,FAO and ET_0,d,FAO had a better agreement than ET_0,24 h,ASCE and ET_0,d,FAO throughout the year and during the summer months. It is also worth noting that the daily calculations for FAO-56 and ASCE were identical. These results demonstrated that for applications that require 15-min time steps or daily ET₀ for the entire year, the use of ET_0,15-min,FAO and ET_0,24 h,FAO, respectively, will yield more consistent outcomes. The use of ET_0,d,FAO during the summer months can be as accurate as the use of ET_0,24 h,FAO for applications that require daily time steps, such as irrigation scheduling.     

A hybrid approach to compute seismic travel times in three-dimensional tetrahedral meshes

We propose an optimized method to compute travel times for seismic inversion problems. It is a hybrid method combining several approaches to deal with travel time computation accuracy in unstructured meshes based on tetrahedral elementary cells. As in the linear travel time interpolation method, the proposed approach computes travel times using seismic ray paths. The method operates in two sequential steps: At a first stage, travel times are computed for all nodes of the mesh using a modified version of the shortest path method. The difference with the standard version is that additional secondary nodes (called tertiary nodes) are added temporarily around seismic sources in order to improve accuracy with a reasonable increase in computational cost. During the second step, the steepest travel time gradient method is used to trace back ray paths for each source–receiver pair. Travel times at each receiver are then recomputed using slowness values at the intersection points between the ray path and the traversed cells. A number of numerical tests with an array of different velocity models, mesh resolutions and mesh topologies have been carried out. These tests showed that an average relative error in the order of 0.1% can be achieved at a computational cost that is suitable for travel time inversion.     

A stable flat universe with variable cosmological constant in f(R,T) gravity

In this paper, a general FRW cosmological model has been constructed in f(R,T) gravity reconstruction with variable cosmological constant. A number of solutions to the field equations has been generated by utilizing a form for the Hubble parameter that leads to Berman's law of constant deceleration parameter q = m-1. The possible decelerating and accelerating solutions have been investigated. For(q 0) we get a stable flat decelerating radiation-dominated universe at q = 1. For(q 0) we get a stable accelerating solution describing a flat universe with positive energy density and negative cosmological constant. Nonconventional mechanisms that are expected to address the late-time acceleration with negative cosmological constant have been discussed.     

Composition, age, and origin of the ~620?Ma Humr Akarim and Humrat Mukbid A-type granites: no evidence for pre-Neoproterozoic basement in the Eastern Desert, Egypt

The Humr Akarim and Humrat Mukbid plutons, in the central Eastern Desert of Egypt, are late Neoproterozoic post-collisional alkaline A-type granites. Humr Akarim and Humrat Mukbid plutonic rocks consist of subsolvus alkali granites and a subordinate roof facies of albite granite, which hosts greisen and Sn–Mo-mineralized quartz veins; textural and field evidence strongly suggest the presence of late magmatic F-rich fluids. The granites are Si-alkali rich, Mg–Ca–Ti poor with high Rb/Sr (20–123), and low K/Rb (27–65). They are enriched in high field strength elements (e.g., Nb, Ta, Zr, Y, U, Th) and heavy rare earth elements (La _n /Yb _n ?=?0.27–0.95) and exhibit significant tetrad effects in REE patterns. These geochemical attributes indicate that granite trace element distribution was controlled by crystal fractionation as well as interaction with fluorine-rich magmatic fluids. U–Pb SHRIMP zircon dating indicates an age of ~630–620?Ma but with abundant evidence that zircons were affected by late corrosive fluids (e.g., discordance, high common Pb). εNd at 620?Ma ranges from +3.4 to +6.8 (mean?=?+5.0) for Humr Akarim granitic rocks and from +4.8 to +7.5 (mean?=?+5.8) for Humrat Mukbid granitic rocks. Some slightly older zircons (~740?Ma, 703?Ma) may have been inherited from older granites in the region. Our U–Pb zircon data and Nd isotope results indicate a juvenile magma source of Neoproterozoic age like that responsible for forming most other ANS crust and refute previous conclusions that pre-Neoproterozoic continental crust was involved in the generation of the studied granites.     

Water use at Luxor,Egypt: consumption analysis and future demand forecasting

Water resources in Egypt are becoming scarce and the demand for clean drinking water supply is one of the most important priorities of the Egyptian government in recent years. Analyzing water use and future demand forecasting is a primitive clue for water demand management. Water in Luxor is used for agricultural, residential, institutional, commercial, and touristic purposes. The results of water use analysis indicated that for the time period from 1983 to 2012, agriculture is the highest consumer of water which reached about 94.76–97.38 % followed by residential water consumption (1.90–3.05 %), institutional water consumption (0.71–1.75 %), and touristic water consumption (0.02–0.43 %), respectively. The future demand forecasting results revealed that the present situation may continue to rise in the next 50 years which will increase the water demand with a water deficit ranging between 15 and 114 MCM/year. To fill the gap between the present water consumption and future residential, institutional, commercial, and touristic water demand, additional municipal facilities, and improvement and management of water supply/demand are needed. To cope with the predicted future water demand, it is recommended to improve the on-farm irrigation, reduce the demand for irrigation water, rationalize the irrigation water use, and enhance the integrated role of water users in integrated water resources management.     

Physical and Chemical Beneficiation of the Egyptian Beach Monazite

The Egyptian black sands contain several economic minerals, especially ilmenite. Monazite can reach concentrations up to 0.6 wt.%. The majority of monazite grains have light to deep canary and lemon yellow colors, whereas enigmatic monazite grains have brown, red, resinous, yellow and colorless to pinkish colors. The behavior of monazite with the electrostatic field setting of the roll-type electrostatic separator was studied for the different variables of the separator. Most of the monazite grains are reversible negative and are attracted towards the positively charged static electrode. Using wet gravity concentration, both low and high intensity magnetic separation, and electrostatic separation techniques, a high grade concentrate assaying 97 wt. % monazite with a recovery of 76.8% can be obtained. The Egyptian beach monazite contains high concentrations of Ce, La and Nd in addition to minor amounts of Y, Pr, Sm, Gd, Dy and Eu. It is particularly rich in the lighter rare earth elements (cerium subgroup). By a new method of ion exchange technique after chemically dissolving the mineral with sulfuric acid, both of REEs, Th and U, could be individually separated. The efficiency of the separation has been tested with sulfuric acid concentration at 2M H₂SO₄ where the thorium and uranium could be obtained with a cation exchange synthetic resin column, while rare earth metal ions are adsorbed and then individually separated. A highly pure thorium product could be obtained by oxalate precipitation followed by uranium precipitation as diuranate using NaOH.     

Ash Shutbah: A possible impact structure in Saudi Arabia

We have investigated the Ash Shutbah circular structure in central Saudi Arabia (21°37′N 45°39′E) using satellite imagery, field mapping, thin‐section petrography, and X‐ray diffraction of collected samples. The approximately 2.1 km sized structure located in flat‐lying Jurassic Tuwaiq Mountain Limestone has been nearly peneplained by erosional processes. Satellite and structural data show a central area consisting of Dhruma Formation sandstones with steep bedding and tight folds plunging radially outward. Open folding occurs in displaced, younger Tuwaiq Mountain Limestone Formation blocks surrounding the central area, but is absent outside the circular structure. An approximately 60 cm thick, unique folded and disrupted orthoquartzitic sandstone marker bed occurring in the central area of the structure is found 140 m deeper in undisturbed escarpment outcrops located a few hundred meters west of the structure. With exception of a possible concave shatter cone found in the orthoquartzite of the central area, other diagnostic shock features are lacking. Some quartz‐rich sandstones from the central area show pervasive fracturing of quartz grains with common concussion fractures. This deformation was followed by an event of quartz dissolution and calcite precipitation consistent with local sea‐ or groundwater heating. The combination of central stratigraphic uplift of 140 m, concussion features in discolored sandstone, outward‐dipping concentric folds in the central area, deformation restricted to the rocks of the ring structure, a complex circular structure of 2.1 km diameter that appears broadly consistent with what one would expect from an impact structure in sedimentary targets, and a possible shatter cone all point to an impact origin of the Ash Shutbah structure. In fact, the Ash Shutbah structure appears to be a textbook example of an eroded, complex impact crater located in flat‐lying sedimentary rocks, where the undisturbed stratigraphic section can be studied in escarpment outcrops in the vicinity of the structure.     

Improved Pile Geometry to Reduce Negative Skin Friction on Single Driven Pile and Pile Groups Subjected to Lateral Loads

Geotechnical and Geological Engineering - Negative skin friction on piles represents a severe problem when piles were installed in soft clay due to consolidation process. It reduces the bearing...     

Chemical Fractionation of Aluminium in the Sediments of El-Burullus Lagoon of Nile Delta,Egypt

A five step sequential extraction technique, following Tessier’s protocol has been applied to determine the chemical association of aluminium with major sedimentary phases (exchangeable, carbonate, manganese and iron oxides, organic and residual fraction) in four short sediment cores collected from El-Burullus lagoon of the Nile delta, Egypt. This study is a first approach of chemical fractionation of aluminium in one of the protective areas of the Mediterranean Sea of Egypt. The total metal content was also determined. The results of the fractionation study indicated that aluminium was mainly associated with the residual fraction (>95%). The organic and Fe–Mn oxide fractions were the next important phases. The exchangeable and carbonate fractions were less than 1%, limiting its potential toxicity as a pollutant. The geochemical analysis of aluminium forms reflected the lithogenic origin of this metal in the study area.