Scraping and extirpating: two strategies to induce recovery of diseased Gorgonia ventalina sea fans

Coral diseases are currently playing a major role in the worldwide decline in coral reef integrity. One of the coral species most afflicted by disease in the Caribbean, and which has been the focus of much research, is the sea fan Gorgonia ventalina. There is, however, very little information regarding the capacity of sea fans to recover after being infected. The aim of this study was to compare the rehabilitation capacity of G. ventalina after diseased‐induced lesions were eliminated either by scraping or extirpating the affected area. Scraping consisted of removing any organisms overgrowing the axial skeleton from the diseased area as well as the purple tissue bordering these overgrowths using metal bristle brushes. Extirpation consisted of cutting the diseased area, including the surrounding purpled tissue, using scissors. The number of scraped colonies that fully or partially rehabilitated after being manipulated and the rates at which the sea fans whose lesions were scrapped grew back healthy tissue were compared among: (i) colonies that inhabited two sites with contrasting environmental conditions; (ii) colonies of different sizes and (iii) colonies with different ratios of area of legions to total colony area (LA/CA). Both strategies proved to be very successful in eliminating lesions from sea fans. In the case of scraping, over 51% of the colonies recovered between 80% and 100% of the lost tissue within 16 months. The number of colonies that recovered from scraping was similar among sites and among colony sizes, but differed significantly depending on the relative amount of lesion to colony area (LA/CA). When lesions were extirpated, lesions did not reappear in any of the colonies. We conclude that lesion scraping is useful for eliminating relatively small lesions (i.e. LA/CA < 10%), as these are likely to recover in a shorter period of time, whereas for relatively large lesions (LA/CA ≥ 10%) it is more appropriate to extirpate the lesion.     

Analytical and numerical analyses of the load‐bearing capacity of retaining walls laterally supported at both ends

This paper investigates the load‐bearing capacity of a perfectly smooth retaining wall laterally supported at both ends assuming that the wall fails by the development of three plastic hinges. The study considers the case of a cohesionless elastic–perfectly plastic backfill with a Mohr–Coulomb yield criterion and an associative flow rule in drained conditions. A kinematically admissible soil–structure failure mechanism is proposed and compared with the conventional solutions and with results from a numerical finite element modelling. The study shows that the proposed solution and the numerical solution are in good agreement. These solutions are found to be much more favourable for the wall than the conventional solutions. Copyright © 2010 John Wiley & Sons, Ltd.     

X-ray determination and equilibrium composition of clinopyroxenes in the system CaO-MgO-Al2O3-SiO2

Ternary clinopyroxenes have been synthesized in the plane Di-CaTs-En. The variation of their crystallographic parameters has allowed the development of three determinative grids, which utilize b-, 2 _22¯1–2 ₃₁₀ and 2 ₃₃₀ –2 ₂₀₂ respectively. These grids show significant differences in comparison with the previously proposed ones. Present results have been used to review some data on clinopyroxenes equilibria in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS) (Biggar 1969; Bruno and Facchinelli 1978; Herzberg 1978; O'Hara and Schairer 1963; Boyd 1969). In particular the petrogenic grid correlating P, T and CaTs content of clinopyroxenes in spinel-lherzolite assemblage (Herzberg 1978) has been revised, and consequently equilibrium temperatures rise by one hundred degrees.     

MINERALOGY,PETROLOGY AND CHEMISTRY OF THE ISNA (C3) METEORITE

A total chemical analysis of the Isna, Egypt, meteorite is similar to analyses for chondrites of type C3, Ornans sub-type; however, comparison with one group of chemical data indicates that Isna is intermediate between the C3(O)'s and C3(V)'s in terms of total Fe. On the basis of atom ratios of Fe, Ca, Al, and Ti to Si, Isna can also be placed into a chemical group which includes types C1 and C2, as well as C3(O). Thin sections show a variety of small, closely-packed chondrules, fragments, and aggregate-like masses in a poorly translucent matrix. Olivine + clinoenstatite inclusions rich in metal and troilite, and olivine-rich inclusions are abundant and show evidence of shock. Ca-Al-Ti-rich inclusions, of probable high-temperature origin, contain olivine, spinel, Ca-rich nepheline, gehlenite, diopside, augite, enstatite, and anorthite. Kamacite and taenite from various occurrences in the meteorite have rather uniform Ni and Co contents, and Ni/Co for kamacite is close to that for several C3(O)'s.     

Subsurface thermal conductivity assessment in Calabria (southern Italy): a regional case study

Determining the suitability of a local area at a regional or local scale for the geothermal application of low enthalpy systems requires the knowledge of rock thermal conductivity values to evaluate the possibility of low-enthalpy heat exchange. A digital cartographic tool is also needed to synthesize the thermal properties of the underground. This tool should be easily accessible and upgradeable and thus suitable for territorial planning and environmental control. In order to address these key issues, a methodological approach was developed within the framework of the national VIGOR Project, dedicated to evaluating the geothermal potential in southern Italy. In this paper the region of Calabria was selected as a case study. Around 70 samples that were representative of the main geological formations were collected from all over the area. Thermal property tests were carried out both in dry and wet conditions, using a thermal device in accordance with the modified transient plane source method. The thermal conductivity values were then compared with data from the international literature. In order to consider the influence of the entire stratigraphic sequence on the thermal conductivity parameters, a geostatistical analysis of the available lithostratigraphic data was performed using the MATLAB toolbox Modalstrata, specially developed for this purpose. A comprehensive geothermal subsurface characterization of Calabria was thus obtained.     

Comparison of nonlinear static methods for the assessment of asymmetric buildings

Traditional nonlinear static methods, e.g. the original version of the N2 method implemented in Eurocode 8, are not always effective in the assessment of asymmetric structures because of the errors committed in the evaluation of the torsional response. To overcome this shortcoming, two methods have recently been suggested by Kreslin and Fajfar (Bull Earthquake Eng 10(2):695–715, 2012) and Bosco et al. (Earthq Eng Struct Dyn 41:1751–1773, 2012). In particular, the method proposed by Kreslin and Fajfar adjusts the results of the nonlinear static analysis by means of those of a standard modal response spectrum analysis. In the method proposed by Bosco et al., the researchers suggested the use of two nonlinear static analyses characterized by lateral forces applied to different points of the deck. In this paper, the two improved nonlinear static methods and the original N2 method are applied to predict the maximum dynamic response of single- and multi-storey systems subjected to artificial and recorded accelerograms. The results highlight that the improved nonlinear static methods provide estimates which are more accurate than those of the original N2 method. Further, the comparison of the results identifies the range of the structural properties within which the original N2 method is still reliable and the range within which one of the two improved methods should be preferred.     

Corrective eccentricities for assessment by the nonlinear static method of 3D structures subjected to bidirectional ground motions

Nonlinear static methods are reliable in the evaluation of the seismic response of planar structural schemes, but they are not very effective in the assessment of three-dimensional building structures. The authors of this paper have recently proposed a nonlinear static approach for asymmetric structures, which is an improvement on that stipulated by seismic codes. This method is based on the observation that the distribution of the maximum dynamic displacements of the deck can be enveloped by two pushover analyses performed by applying the lateral force with two eccentricities with respect to the center of mass of the deck. These eccentricities, named “corrective eccentricities”, are defined so that the two corresponding pushover analyses provide displacements that are equal to those evaluated by nonlinear dynamic analysis at the two sides of the deck. In this paper, the corrective eccentricities are determined for a wide set of single-story systems. The equations for their analytical evaluation are determined and their reliability is demonstrated. Finally, the analysis of a multi-story structure is conducted to show how the method can be applied to real buildings. Copyright © 2012 John Wiley & Sons, Ltd.     

Stress behavior from fault data sets within a transtensional zone, South Central Cordillera, Luzon, Philippines: Implications for mineral occurrences

The structural signature in the area between the Baguio mineral district and Ansagan, Tuba, Benguet in the South Central Cordillera, northern Luzon, Philippines, is dominated by northeast- to ENE-trending faults, contained within a NNW–SSE-trending transtensional strip. This 50-km-long, 25-km-wide elongated tectonic zone is bounded to the west by the Pugo Fault and to the east by the Tebbo Fault, both being branches of the Philippine Fault System. Detailed structural geological (particularly microtectonic) analysis of fracture and mineral vein systems indicates strong conformity with the regional structural direction. Computed extensional stress axis σ₃ directions are oriented N150° on average, sub-parallel to the strike of the bounding faults. The existence of known mineral deposits and prospects within the tectonic strip implies an intimate relationship between transtension and mineral occurrence.