Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

The last 500 year of sedimentation in Shkodra Lake (Albania/Montenegro): paleoenvironmental evolution and potential for paleoseismicity studies

Lake Shkodra (northern Albania, southern Montenegro) is a large (45 km length, 15 km width) and shallow (5 m mean depth) lake, developed on a mainly karstic carbonate substratum. Its recent sedimentary fill (mixed calcareous/siliciclastic clayey silts) was analysed through short gravity cores representing five centuries of environmental archive. A combination of high resolution texture analysis (particle size), magnetic susceptibility, carbon content, and radionuclide activity profiles (²¹⁰Pb, ¹³⁷Cs, ²⁴¹Am) permitted us to detect and date environmental changes, such as the Little Ice Age and the 1962–1963 catastrophic floods. Anthropogenic influences on the watershed, such as damming of the Drin River in the late 1970s, also appear to be recorded. Impacts of known strong earthquakes (1905, 1979), however, could not be clearly detected in the sediment record. The potential of the Shkodra lacustrine archive for paleoseismic investigations on long time intervals (such as Holocene) is discussed. This paper is a preliminary contribution to Shkodra Lake’s Holocene paleolimnology.     

Modelling larval dispersal of the king scallop (Pecten maximus) in the English Channel: examples from the bay of Saint-Brieuc and the bay of Seine

The king scallop (Pecten maximus) is one of the most important benthic species of the English Channel as it constitutes the first fishery in terms of landings in this area. To support strategies of spatial fishery management, we develop a high-resolution biophysical model to study scallop dispersal in two bays along the French coasts of the English Channel (i.e. the bay of Saint-Brieuc and the bay of Seine) and to quantify the relative roles of local hydrodynamic processes, temperature-dependent planktonic larval duration (PLD) and active swimming behaviour (SB). The two bays are chosen for three reasons: (1) the distribution of the scallop stocks in these areas is well known from annual scallop stock surveys, (2) these two bays harbour important fisheries and (3) scallops in these two areas present some differences in terms of reproductive cycle and spawning duration. The English Channel currents and temperature are simulated for 10 years (2000–2010) with the MARS-3D code and then used by the Lagrangian module of MARS-3D to model the transport. Results were analysed in terms of larval distribution at settlement and connectivity rates. While larval transport in the two bays depended both on the tidal residual circulation and the wind-induced currents, the relative role of these two hydrodynamic processes varied among bays. In the bay of Saint-Brieuc, the main patterns of larval dispersal were due to tides, the wind being only a source of variability in the extent of larval patch and the local retention rate. Conversely, in the bay of Seine, wind-induced currents altered both the direction and the extent of larval transport. The main effect of a variable PLD in relation to the thermal history of each larva was to reduce the spread of dispersal and consequently increase the local retention by about 10 % on average. Although swimming behaviour could influence larval dispersal during the first days of the PLD when larvae are mainly located in surface waters, it has a minor role on larval distribution at settlement and retention rates. The analysis of the connectivity between subpopulations within each bay allows identifying the main sources of larvae which depend on both the characteristics of local hydrodynamics and the spatial heterogeneity in the reproductive outputs.     

Preliminary Interlaboratory Trial for ISO/DIS 12010: Determination of Short Chain Polychlorinated Alkanes (SCCP) in Water

A first preliminary interlaboratory trial was planned to prepare ISO/DIS 12010: Water quality – determination of short chain polychlorinated alkanes (SCCP) in water – method using GC/MS and electron capture negative ionisation (ECNI). The task was to determine the sum of short chain polychlorinated n‐alkanes with carbon chain lengths of C₁₀–C₁₃ and a chlorine content between 49 and 67% in water by GC‐ECNI‐MS and quantification by multiple linear regression described in ISO/DIS 12010 as the compulsory method. Distributed samples were obtained from a real water extract spiked with a target concentration of 0.4 µg/mL sum of SCCP, i.e. the environmental quality target level according to the Water Framework Directive. The interlaboratory trial included the calibration, a column chromatographic clean up, a concentration step and an integration of chromatographic unresolved humps as well as the quantification with multiple linear regression. Reproducibility standard deviations between 21.5 and 22.9% were achieved by 17 participating laboratories from four countries. The method outlined no significant difference of the results between the standard solution and a real water matrix extract. On the basis of this succeeded preliminary interlaboratory trial the final interlaboratory trial for validation of ISO 12010 was prepared in autumn 2010.     

A Top-Cut Model for Deposits with Heavy-Tailed Grade Distribution

In some ore deposits, the grade distribution is heavy-tailed and high values make the inference of first- and second-order statistics nonrobust. In the case of gold data, high values are usually cut and the block estimation is performed using truncated grades. With this method, a part of the deposit is omitted, resulting in a potential bias on resources figures. Ad-hoc corrections can be applied on the final figures to take into account the tail of the grade distribution, but no theoretical guidelines are available. A geostatistical model has been developed to handle high values based on the assumption that for high grade zones, the only tangible information is the geometry. The grade variable z can be split into three parts: the truncated grade ( $\operatorname{Min} (z, z_{\mathrm{e}})$ where z _e is the top-cut grade), a weighted indicator above top-cut grade (1{z≥z _e}), and a residual. Within this framework, the residual is poorly structured, and in most cases is a pure nugget-effect. Moreover, it has no spatial correlation with the truncated grade and the indicator above top-cut grade. This decomposition makes the variographic study more robust because variables (indicator and truncated grade) do not keep high grade values. The underlying hypotheses can be tested on experimental indicator variograms and the top-cut grade can be justified. Finally, the estimation is based on a truncated grade and indicator cokriging. The model is applied to blast holes from a gold deposit and on a simulated example. Both cases illustrate the benefits of keeping the high values in the estimation process via an appropriate mathematical model.     

Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

External controls on the distribution,fabrics and mineralization of modern microbial mats in a coastal hypersaline lagoon,Cayo Coco (Cuba)

Active, carbonate‐mineralizing microbial mats flourish in a tropical, highly evaporative, marine‐fed lagoonal network to the south of Cayo Coco Island (Cuba). Hypersaline conditions support the development of a complex sedimentary microbial ecosystem with diverse morphologies, a variable intensity of mineralization and a potential for preservation. In this study, the role of intrinsic (i.e. microbial) and extrinsic (i.e. physicochemical) controls on microbial mat development, mineralization and preservation was investigated. The network consists of lagoons, forming in the interdune depressions of a Pleistocene aeolian substratum; they developed due to a progressive increase in sea‐level since the Holocene. The hydrological budget in the Cayo Coco lagoonal network changes from west to east, increasing the salinity. This change progressively excludes grazers and increases the saturation index of carbonate minerals, favouring the development and mineralization of microbial mats in the easternmost lagoons. Detailed mapping of the easternmost lagoon shows four zones with different flooding regimes. The microbial activity in the mats was recorded using light–dark shifts in conjunction with microelectrode O₂ and HS^? profiles. High rates of O₂ production and consumption, in addition to substantial amounts of exopolymeric substances, are indicative of a potentially strong intrinsic control on mineralization. Seasonal, climate‐driven water fluctuations are key for mat development, mineralization, morphology and distribution. Microbial mats show no mineralization in the permanently submersed zone, and moderate mineralization in zones with alternating immersion and exposure. It is suggested that mineralization is also driven by water‐level fluctuations and evaporation. Mineralized mats are laminated and consist of alternating trapping and binding of grains and microbially induced magnesium calcite and dolomite precipitation. The macrofabrics of the mats evolve from early colonizing Flat mats to complex Cerebroid or Terrace structures. The macrofabrics are influenced by the hydrodynamic regime: wind‐driven waves inducing relief terraces in windward areas and flat morphologies on the leeward side of the lagoon. Other external drivers include: (i) storm events that either promote (for example, by bioclasts covering) or prevent (for example, by causing erosion) microbial mat preservation; and (ii) subsurface degassing, through mangrove roots and desiccation cracks covered by Flat mats (i.e. forming Hemispheroids and Cerebroidal structures). These findings provide in‐depth insights into understanding fossil microbialite morphologies that formed in lagoonal settings.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

The use of environmental integrative indicators to assess seabed disturbance in estuaries and coasts: Application to the Humber Estuary, UK

The coastal zone is subject to many and varied changes resulting from human activities and natural processes. Existing or emerging agreements and legislation acknowledge the relevance of indicators for monitoring these. In the UK, following a series of recent workshops, potential indicators of nearshore disturbance have been identified and grouped into three broad indices: 'Coastline Morphological Change', 'Resource Use Change' and 'Environmental Quality and its Perception'. The present study developed these indicators further and tested their use by applying them to 18 sections in the Humber Estuary, Eastern England. The results obtained reflect the current knowledge of the state of the Humber environment and show the potential of integrative indicators but indicate that further studies are required to assess the relative importance of the indicators and their value in reflecting the ability of the ecosystems to sustain natural habitats and populations at a good conservation status.     

Orbital imprint on Holocene palaeohydrological variations in west‐central Europe as reflected by lake‐level changes at Cerin (Jura Mountains,eastern France)

This paper presents a lake‐level record for the Holocene at Lake Cerin (Jura Mountains, eastern France). It is based on a range of sedimentological techniques validated in previous studies, with a combination of systematic lithostratigraphic investigations of the infillings accumulated in the lacustrine basin, and sediment analyses of two selected cores. The chronology is based on 10 radiocarbon dates and pollen stratigraphy. On a millennial scale, the Cerin lake‐level record shows three distinct successive phases characterised by higher lake‐level conditions until ca. 9000 cal. a BP, followed by a maximal lowering at ca. 9000–8500 cal. a BP, and a progressive rise until the present. This rise was punctuated by centennial‐scale fluctuations, with major events around 4000, 2800 and after 1500 cal. a BP. Considered on a multimillennial scale, the general pattern of palaeohydrological changes reconstructed at Cerin reflects the impact of orbitally driven summer insolation. This is in agreement with other regional and extra‐regional palaeoclimatic records, although every record shows peculiarities in timing and shape depending on the proxy used for reconstruction. In this general context, centennial to multicentennial oscillations appear to have been second‐order events in comparison with the major influence of the orbital factor. Copyright © 2011 John Wiley & Sons, Ltd.